blob: 2098bc7072cb3dd467ad022b53a2ad26b81a3414 [file] [log] [blame]
#
# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# Enable this option in case if restoring the slot0 partition is expected from slot1
# partition in case if slot0 is not bootable or damaged
CONFIG_BOOT_BOOTSTRAP=y
# Enable this option in case if SWAP_MOVE logic need to be used
CONFIG_BOOT_SWAP_USING_MOVE=y
# Enable this option in case if SWAP_MOVE using scratch logic need to be used
# Enabling this option expecting the availability of scratch partition in DTS
CONFIG_BOOT_SWAP_USING_SCRATCH=n
# Enable this option in case if the whole slot0 image need to be validated
# With disabled option the only image magic is validated
CONFIG_BOOT_VALIDATE_SLOT0=y
# Maximum number of image sectors supported by the bootloader.
CONFIG_BOOT_MAX_IMG_SECTORS=4096
# Sets log level for modules which don't specify it explicitly.
# When set to 0 it means log will not be activated for those modules.
# Levels are:
# - 0 OFF, do not write by default
# - 1 ERROR, default to only write LOG_LEVEL_ERR
# - 2 WARNING, default to write LOG_LEVEL_WRN
# - 3 INFO, default to write LOG_LEVEL_INFO
# - 4 DEBUG, default to write LOG_LEVEL_DBG
CONFIG_LOG_DEFAULT_LEVEL=1
# USB DFU configuration
CONFIG_USB_DFU_WILL_DETACH=n
CONFIG_BOOT_USB_DFU_GPIO=y
CONFIG_MCUBOOT_INDICATION_LED=y