| /* |
| * Copyright (c) 2001, 2002 Swedish Institute of Computer Science. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT |
| * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
| * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
| * OF SUCH DAMAGE. |
| * |
| * This file is part of the lwIP TCP/IP stack. |
| * |
| * Author: Adam Dunkels <adam@sics.se> |
| * |
| */ |
| |
| #ifndef __LWIPOPTS_H__ |
| #define __LWIPOPTS_H__ |
| |
| #include "FreeRTOSConfig.h" |
| |
| #define LWIP_NETIF_TX_ZEROCP_ENABLE 1 |
| #define LWIP_TCPIP_CORE_LOCKING 1 |
| #define LWIP_NETIF_TX_SINGLE_PBUF 1 |
| #define TCPIP_MBOX_SIZE 16 |
| #define DEFAULT_RAW_RECVMBOX_SIZE 16 |
| #define DEFAULT_UDP_RECVMBOX_SIZE 16 |
| #define DEFAULT_TCP_RECVMBOX_SIZE 16 |
| #define DEFAULT_ACCEPTMBOX_SIZE 16 |
| #define LWIP_STATS_DISPLAY 0 |
| |
| // fix http IOT issue |
| #define LWIP_WND_SCALE 1 |
| #define TCP_RCV_SCALE 1 |
| #define MEMP_NUM_NETDB 4 |
| // fix reuse address issue |
| #define SO_REUSE 1 |
| #define LWIP_SO_RCVTIMEO 1 |
| // for ip display |
| #define LWIP_NETIF_STATUS_CALLBACK 1 |
| |
| #if defined(MTK_MDNS_ENABLE) |
| #define LWIP_IPV6 1 |
| #define IP_REASS_MAXAGE 60 // 3 |
| #define LWIP_IPV6_FRAG 1 |
| #define LWIP_MULTICAST_PING 1 |
| #define LWIP_HAVE_LOOPIF 1 |
| #define LWIP_IGMP 1 |
| #define LWIP_NETIF_HOSTNAME 1 |
| #define LWIP_DHCP_AUTOIP_COOP 1 |
| #define LWIP_DHCP_AUTOIP_COOP_TRIES 3 |
| |
| #define LWIP_NETBUF_RECVINFO 1 |
| #define LWIP_DNS 1 |
| #define LWIP_SOCKET 1 |
| #define LWIP_COMPAT_SOCKETS 1 |
| #define LWIP_POSIX_SOCKETS_IO_NAMES 1 |
| #define MEMP_NUM_NETBUF 16 |
| #define MEMP_NUM_MLD6_GROUP 10 |
| |
| #define MEMP_NUM_ND6_QUEUE 30 |
| #define LWIP_ND6_RETRANS_TIMER 200 |
| #endif |
| |
| #define ETH_PAD_SIZE 0 |
| |
| #define NO_SYS 0 |
| #define LWIP_CALLBACK_API 1 |
| |
| /* |
| -------------------------------------- |
| ---------- Checksum options ---------- |
| -------------------------------------- |
| */ |
| #define CHECKSUM_GEN_UDP 0 |
| #define CHECKSUM_GEN_TCP 0 |
| #define CHECKSUM_CHECK_UDP 0 |
| #define CHECKSUM_CHECK_TCP 0 |
| |
| /* |
| ------------------------------------ |
| ---------- Memory options ---------- |
| ------------------------------------ |
| */ |
| /* MEM_ALIGNMENT: should be set to the alignment of the CPU for which |
| lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 |
| byte alignment -> define MEM_ALIGNMENT to 2. */ |
| #define MEM_ALIGNMENT 8 |
| |
| /** |
| * MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. |
| * Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution |
| * speed and usage from interrupts! |
| */ |
| #define MEMP_MEM_MALLOC 1 |
| |
| /* MEM_SIZE: the size of the heap memory. If the application will send |
| a lot of data that needs to be copied, this should be set high. */ |
| #if defined(MTK_WIFI_TGN_VERIFY_ENABLE) && !defined(MTK_HOMEKIT_ENABLE) |
| #define MEM_SIZE (100 * 1024) |
| #else |
| #if defined(MTK_WIFI_ROUTER_ENABLE) |
| #define MEM_SIZE (78 * 1024) |
| #else |
| #define MEM_SIZE (48 * 1024) |
| #endif |
| #endif |
| |
| /** |
| * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain |
| * critical regions during buffer allocation, deallocation and memory |
| * allocation and deallocation. |
| */ |
| |
| #define SYS_LIGHTWEIGHT_PROT 1 |
| |
| /* |
| ------------------------------------------------ |
| ---------- Internal Memory Pool Sizes ---------- |
| ------------------------------------------------ |
| */ |
| |
| /* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application |
| sends a lot of data out of ROM (or other static memory), this |
| should be set high. */ |
| #define MEMP_NUM_PBUF 8 |
| /* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One |
| per active UDP "connection". */ |
| #define MEMP_NUM_UDP_PCB 8 |
| /* MEMP_NUM_TCP_PCB: the number of simultaneously active TCP |
| connections. */ |
| #define MEMP_NUM_TCP_PCB 32 // 8 original |
| /* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP |
| connections. */ |
| #define MEMP_NUM_TCP_PCB_LISTEN 32 // 16 original |
| /* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP |
| segments. */ |
| #define MEMP_NUM_TCP_SEG 255 |
| |
| /** |
| * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing |
| * packets (pbufs) that are waiting for an ARP request (to resolve |
| * their destination address) to finish. |
| * (requires the ARP_QUEUEING option) |
| */ |
| #define MEMP_NUM_ARP_QUEUE 8 |
| |
| /** |
| * MEMP_NUM_NETCONN: the number of struct netconns. |
| * (only needed if you use the sequential API, like api_lib.c) |
| */ |
| #define MEMP_NUM_NETCONN 32 |
| |
| /* |
| ---------------------------------- |
| ---------- Pbuf options ---------- |
| ---------------------------------- |
| */ |
| /* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ |
| #define PBUF_POOL_SIZE 10 |
| |
| /* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ |
| //#define PBUF_POOL_BUFSIZE 1536 |
| /* packet of MT7687 IOT has extra TXD header and packet offset */ |
| #define PBUF_POOL_BUFSIZE 1664 |
| |
| /** |
| * PBUF_LINK_HLEN: the number of bytes that should be allocated for a |
| * link level header. The default is 14, the standard value for |
| * Ethernet. |
| */ |
| |
| #define RESERVED_HLEN 0 // depend on CFG_CONNSYS_TXD_PAD_SIZE |
| #ifdef MTK_HIF_GDMA_ENABLE |
| #define PBUF_LINK_ENCAPSULATION_HLEN 0 // for WiFi headroom (TX zero copy) |
| #else |
| #define PBUF_LINK_ENCAPSULATION_HLEN (64 + 4) |
| #endif |
| #define PBUF_LINK_HLEN (RESERVED_HLEN + 14 + ETH_PAD_SIZE) |
| /* |
| --------------------------------- |
| ---------- TCP options ---------- |
| --------------------------------- |
| */ |
| #define LWIP_TCP 1 |
| #define TCP_TTL 255 |
| |
| /* Controls if TCP should queue segments that arrive out of |
| order. Define to 0 if your device is low on memory. */ |
| #define TCP_QUEUE_OOSEQ 1 |
| |
| /* TCP Maximum segment size. */ |
| #define TCP_MSS 1476 |
| |
| /* TCP sender buffer space (bytes). */ |
| #define TCP_SND_BUF (24 * 1024) //(12 * 1024) |
| |
| /* TCP sender buffer space (pbufs). This must be at least = 2 * |
| TCP_SND_BUF/TCP_MSS for things to work. */ |
| #define TCP_SND_QUEUELEN ((4 * (TCP_SND_BUF) + (TCP_MSS - 1)) / (TCP_MSS)) |
| |
| /* TCP receive window. */ |
| #define TCP_WND (24 * 1024) |
| |
| /* Maximum number of retransmissions of data segments. */ |
| #define TCP_MAXRTX 12 |
| |
| /* Maximum number of retransmissions of SYN segments. */ |
| #define TCP_SYNMAXRTX 4 |
| |
| #define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 1 |
| |
| /* |
| --------------------------------- |
| ---------- ARP options ---------- |
| --------------------------------- |
| */ |
| #define LWIP_ARP 1 |
| #define ARP_TABLE_SIZE 10 |
| #define ARP_QUEUEING 1 |
| |
| /* ---------- IP options ---------- */ |
| /* Define IP_FORWARD to 1 if you wish to have the ability to forward |
| IP packets across network interfaces. If you are going to run lwIP |
| on a device with only one network interface, define this to 0. */ |
| #define IP_FORWARD 1 |
| |
| /* Define IP_NAPT to 1 If you wish to have the ability to forward |
| IP packets across network interfaces using Network Address Port |
| Translation (NAPT).*/ |
| #if defined(MTK_WIFI_ROUTER_ENABLE) |
| #define IP_NAPT 1 |
| #endif |
| |
| /* If defined to 1, IP options are allowed (but not parsed). If |
| defined to 0, all packets with IP options are dropped. */ |
| #define IP_OPTIONS 1 |
| |
| #define IP_REASSEMBLY 1 |
| |
| /** |
| * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. |
| * Since the received pbufs are enqueued, be sure to configure |
| * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive |
| * packets even if the maximum amount of fragments is enqueued for reassembly! |
| */ |
| #if defined(MTK_WIFI_TGN_VERIFY_ENABLE) |
| #define IP_REASS_MAX_PBUFS 25 |
| #else |
| #define IP_REASS_MAX_PBUFS 12 |
| #endif |
| /* ---------- ICMP options ---------- */ |
| #define ICMP_TTL 255 |
| |
| /* ---------- DHCP options ---------- */ |
| /* Define LWIP_DHCP to 1 if you want DHCP configuration of |
| interfaces. DHCP is not implemented in lwIP 0.5.1, however, so |
| turning this on does currently not work. */ |
| #define LWIP_DHCP 1 |
| #define LWIP_DHCP_CHECK_LINK_UP 1 |
| |
| /* 1 if you want to do an ARP check on the offered address |
| (recommended). */ |
| #define DHCP_DOES_ARP_CHECK 1 |
| |
| /* ---------- UDP options ---------- */ |
| #define LWIP_UDP 1 |
| #define UDP_TTL 255 |
| |
| /* ---------- Statistics options ---------- */ |
| #if defined(MTK_LWIP_STATISTICS_ENABLE) |
| #define LWIP_STATS 1 |
| #define LWIP_STATS_DISPLAY 1 |
| #endif |
| /* |
| * Should use the default value defined in tcp_impl.h |
| */ |
| /* |
| ------------------------------------ |
| ---------- AUTOIP options ---------- |
| ------------------------------------ |
| */ |
| #if defined(MTK_HOMEKIT_ENABLE) || defined(MTK_MDNS_ENABLE) |
| #define LWIP_AUTOIP 1 |
| #else |
| #define LWIP_AUTOIP 0 |
| #endif |
| |
| /* |
| ---------------------------------- |
| ---------- DNS options ----------- |
| ---------------------------------- |
| */ |
| #define LWIP_DNS 1 |
| |
| /* |
| --------------------------------- |
| ---------- PPP options ---------- |
| --------------------------------- |
| */ |
| #define PPP_SUPPORT 0 |
| |
| /* |
| ------------------------------------------------ |
| ---------- Network Interfaces options ---------- |
| ------------------------------------------------ |
| */ |
| |
| /** |
| * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP |
| * address equal to the netif IP address, looping them back up the stack. |
| */ |
| #define LWIP_NETIF_LOOPBACK 1 |
| |
| /** |
| * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback |
| * sending for each netif (0 = disabled) |
| */ |
| #define LWIP_LOOPBACK_MAX_PBUFS 12 |
| |
| /* |
| ------------------------------------ |
| ---------- LOOPIF options ---------- |
| ------------------------------------ |
| */ |
| /** |
| * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c |
| */ |
| #define LWIP_HAVE_LOOPIF 1 |
| |
| /* |
| * Should use the default value defined in opt.h |
| */ |
| |
| /** |
| * MTK_LWIP_DYNAMIC_DEBUG_ENABLE: Support LwIP dynamic debug |
| * No dependency |
| */ |
| #if defined(MTK_LWIP_DYNAMIC_DEBUG_ENABLE) |
| |
| struct lwip_debug_flags |
| { |
| char * debug_flag_name; |
| uint32_t debug_flag; |
| }; |
| |
| extern struct lwip_debug_flags lwip_debug_flags[]; |
| |
| #define LWIP_DEBUG LWIP_DBG_ON |
| #define LWIP_DEBUG_IDX(idx) ((idx) >> 8) |
| |
| #undef ETHARP_DEBUG |
| #undef NETIF_DEBUG |
| #undef PBUF_DEBUG |
| #undef API_LIB_DEBUG |
| #undef API_MSG_DEBUG |
| #undef SOCKETS_DEBUG |
| #undef ICMP_DEBUG |
| #undef IGMP_DEBUG |
| #undef INET_DEBUG |
| #undef IP_DEBUG |
| #undef IP_REASS_DEBUG |
| #undef RAW_DEBUG |
| #undef MEM_DEBUG |
| #undef MEMP_DEBUG |
| #undef SYS_DEBUG |
| #undef TIMERS_DEBUG |
| #undef TCP_DEBUG |
| #undef TCP_INPUT_DEBUG |
| #undef TCP_FR_DEBUG |
| #undef TCP_RTO_DEBUG |
| #undef TCP_CWND_DEBUG |
| #undef TCP_WND_DEBUG |
| #undef TCP_OUTPUT_DEBUG |
| #undef TCP_RST_DEBUG |
| #undef TCP_QLEN_DEBUG |
| #undef UDP_DEBUG |
| #undef TCPIP_DEBUG |
| #undef PPP_DEBUG |
| #undef SLIP_DEBUG |
| #undef DHCP_DEBUG |
| #undef AUTOIP_DEBUG |
| #undef SNMP_MSG_DEBUG |
| #undef SNMP_MIB_DEBUG |
| #undef DNS_DEBUG |
| |
| #define ETHARP_DEBUG 0x0000U |
| #define NETIF_DEBUG 0x0100U |
| #define PBUF_DEBUG 0x0200U |
| #define API_LIB_DEBUG 0x0300U |
| #define API_MSG_DEBUG 0x0400U |
| #define SOCKETS_DEBUG 0x0500U |
| #define ICMP_DEBUG 0x0600U |
| #define IGMP_DEBUG 0x0700U |
| #define INET_DEBUG 0x0800U |
| #define IP_DEBUG 0x0900U |
| #define IP_REASS_DEBUG 0x0a00U |
| #define RAW_DEBUG 0x0b00U |
| #define MEM_DEBUG 0x0c00U |
| #define MEMP_DEBUG 0x0d00U |
| #define SYS_DEBUG 0x0e00U |
| #define TIMERS_DEBUG 0x0f00U |
| #define TCP_DEBUG 0x1000U |
| #define TCP_INPUT_DEBUG 0x1100U |
| #define TCP_FR_DEBUG 0x1200U |
| #define TCP_RTO_DEBUG 0x1300U |
| #define TCP_CWND_DEBUG 0x1400U |
| #define TCP_WND_DEBUG 0x1500U |
| #define TCP_OUTPUT_DEBUG 0x1600U |
| #define TCP_RST_DEBUG 0x1700U |
| #define TCP_QLEN_DEBUG 0x1800U |
| #define UDP_DEBUG 0x1900U |
| #define TCPIP_DEBUG 0x1a00U |
| #define PPP_DEBUG 0x1b00U |
| #define SLIP_DEBUG 0x1c00U |
| #define DHCP_DEBUG 0x1d00U |
| #define AUTOIP_DEBUG 0x1e00U |
| #define SNMP_MSG_DEBUG 0x1f00U |
| #define SNMP_MIB_DEBUG 0x2000U |
| #define DNS_DEBUG 0x2100U |
| #endif |
| |
| #endif /* __LWIPOPTS_H__ */ |
