| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2013-2018 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * This file implements Inet::TCPEndPoint using sockets. |
| */ |
| |
| #include <inet/TCPEndPointImplSockets.h> |
| |
| #include <inet/InetFaultInjection.h> |
| #include <inet/arpa-inet-compatibility.h> |
| |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/SafeInt.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <system/SystemFaultInjection.h> |
| |
| #include <stdio.h> |
| #include <string.h> |
| #include <utility> |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #include <net/if.h> |
| #include <netinet/tcp.h> |
| #include <sys/ioctl.h> |
| #include <sys/select.h> |
| #include <sys/socket.h> |
| #include <unistd.h> |
| |
| // SOCK_CLOEXEC not defined on all platforms, e.g. iOS/macOS: |
| #ifndef SOCK_CLOEXEC |
| #define SOCK_CLOEXEC 0 |
| #endif |
| |
| #if defined(SOL_TCP) |
| // socket option level for Linux and BSD systems. |
| #define TCP_SOCKOPT_LEVEL SOL_TCP |
| #else |
| // socket option level for macOS & iOS systems. |
| #define TCP_SOCKOPT_LEVEL IPPROTO_TCP |
| #endif |
| |
| #if defined(TCP_KEEPIDLE) |
| // socket option for Linux and BSD systems. |
| #define TCP_IDLE_INTERVAL_OPT_NAME TCP_KEEPIDLE |
| #else |
| // socket option for macOS & iOS systems. |
| #define TCP_IDLE_INTERVAL_OPT_NAME TCP_KEEPALIVE |
| #endif |
| |
| namespace chip { |
| namespace Inet { |
| |
| CHIP_ERROR TCPEndPointImplSockets::BindImpl(IPAddressType addrType, const IPAddress & addr, uint16_t port, bool reuseAddr) |
| { |
| CHIP_ERROR res = GetSocket(addrType); |
| |
| if (res == CHIP_NO_ERROR && reuseAddr) |
| { |
| int n = 1; |
| setsockopt(mSocket, SOL_SOCKET, SO_REUSEADDR, &n, sizeof(n)); |
| |
| #ifdef SO_REUSEPORT |
| // Enable SO_REUSEPORT. This permits coexistence between an |
| // untargetted CHIP client and other services that listen on |
| // a CHIP port on a specific address (such as a CHIP client |
| // with TARGETED_LISTEN or TCP proxying services). Note that |
| // one of the costs of this implementation is the |
| // non-deterministic connection dispatch when multple clients |
| // listen on the address with the same degreee of selectivity, |
| // e.g. two untargetted-listen CHIP clients, or two |
| // targeted-listen CHIP clients with the same node id. |
| |
| if (setsockopt(mSocket, SOL_SOCKET, SO_REUSEPORT, &n, sizeof(n)) != 0) |
| { |
| ChipLogError(Inet, "SO_REUSEPORT: %d", errno); |
| } |
| #endif // defined(SO_REUSEPORT) |
| } |
| |
| if (res == CHIP_NO_ERROR) |
| { |
| SockAddr sa; |
| memset(&sa, 0, sizeof(sa)); |
| socklen_t sockaddrsize = 0; |
| |
| if (addrType == IPAddressType::kIPv6) |
| { |
| sa.in6.sin6_family = AF_INET6; |
| sa.in6.sin6_port = htons(port); |
| sa.in6.sin6_flowinfo = 0; |
| sa.in6.sin6_addr = addr.ToIPv6(); |
| sa.in6.sin6_scope_id = 0; |
| |
| sockaddrsize = sizeof(sa.in6); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else if (addrType == IPAddressType::kIPv4) |
| { |
| sa.in.sin_family = AF_INET; |
| sa.in.sin_port = htons(port); |
| sa.in.sin_addr = addr.ToIPv4(); |
| |
| sockaddrsize = sizeof(sa.in); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| res = INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| if (res == CHIP_NO_ERROR) |
| { |
| if (bind(mSocket, &sa.any, sockaddrsize) != 0) |
| { |
| res = CHIP_ERROR_POSIX(errno); |
| } |
| } |
| } |
| |
| return res; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::ListenImpl(uint16_t backlog) |
| { |
| if (listen(mSocket, backlog) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| // Enable non-blocking mode for the socket. |
| int flags = fcntl(mSocket, F_GETFL, 0); |
| fcntl(mSocket, F_SETFL, flags | O_NONBLOCK); |
| |
| // Wait for ability to read on this endpoint. |
| CHIP_ERROR res = static_cast<System::LayerSockets &>(GetSystemLayer()) |
| .SetCallback(mWatch, HandlePendingIO, reinterpret_cast<intptr_t>(this)); |
| if (res == CHIP_NO_ERROR) |
| { |
| res = static_cast<System::LayerSockets &>(GetSystemLayer()).RequestCallbackOnPendingRead(mWatch); |
| } |
| |
| return res; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::ConnectImpl(const IPAddress & addr, uint16_t port, InterfaceId intfId) |
| { |
| IPAddressType addrType = addr.Type(); |
| |
| ReturnErrorOnFailure(GetSocket(addrType)); |
| |
| if (!intfId.IsPresent()) |
| { |
| // The behavior when connecting to an IPv6 link-local address without specifying an outbound |
| // interface is ambiguous. So prevent it in all cases. |
| if (addr.IsIPv6LinkLocal()) |
| { |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| } |
| else |
| { |
| // Try binding to the interface |
| |
| // If destination is link-local then there is no need to bind to |
| // interface or address on the interface. |
| |
| if (!addr.IsIPv6LinkLocal()) |
| { |
| #ifdef SO_BINDTODEVICE |
| struct ::ifreq ifr; |
| memset(&ifr, 0, sizeof(ifr)); |
| |
| ReturnErrorOnFailure(intfId.GetInterfaceName(ifr.ifr_name, sizeof(ifr.ifr_name))); |
| |
| // Attempt to bind to the interface using SO_BINDTODEVICE which requires privileged access. |
| // If the permission is denied(EACCES) because CHIP is running in a context |
| // that does not have privileged access, choose a source address on the |
| // interface to bind the connetion to. |
| int r = setsockopt(mSocket, SOL_SOCKET, SO_BINDTODEVICE, &ifr, sizeof(ifr)); |
| if (r < 0 && errno != EACCES) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| if (r < 0) |
| #endif // SO_BINDTODEVICE |
| { |
| // Attempting to initiate a connection via a specific interface is not allowed. |
| // The only way to do this is to bind the local to an address on the desired |
| // interface. |
| ReturnErrorOnFailure(BindSrcAddrFromIntf(addrType, intfId)); |
| } |
| } |
| } |
| |
| // Disable generation of SIGPIPE. |
| #ifdef SO_NOSIGPIPE |
| int n = 1; |
| setsockopt(mSocket, SOL_SOCKET, SO_NOSIGPIPE, &n, sizeof(n)); |
| #endif // defined(SO_NOSIGPIPE) |
| |
| // Enable non-blocking mode for the socket. |
| int flags = fcntl(mSocket, F_GETFL, 0); |
| fcntl(mSocket, F_SETFL, flags | O_NONBLOCK); |
| |
| socklen_t sockaddrsize = 0; |
| |
| SockAddr sa; |
| memset(&sa, 0, sizeof(sa)); |
| |
| if (addrType == IPAddressType::kIPv6) |
| { |
| sa.in6.sin6_family = AF_INET6; |
| sa.in6.sin6_port = htons(port); |
| sa.in6.sin6_flowinfo = 0; |
| sa.in6.sin6_addr = addr.ToIPv6(); |
| sa.in6.sin6_scope_id = intfId.GetPlatformInterface(); |
| sockaddrsize = sizeof(sockaddr_in6); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else if (addrType == IPAddressType::kIPv4) |
| { |
| sa.in.sin_family = AF_INET; |
| sa.in.sin_port = htons(port); |
| sa.in.sin_addr = addr.ToIPv4(); |
| sockaddrsize = sizeof(sockaddr_in); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| int conRes = connect(mSocket, &sa.any, sockaddrsize); |
| |
| if (conRes == -1 && errno != EINPROGRESS) |
| { |
| CHIP_ERROR res = CHIP_ERROR_POSIX(errno); |
| DoClose(res, true); |
| return res; |
| } |
| |
| ReturnErrorOnFailure(static_cast<System::LayerSockets &>(GetSystemLayer()) |
| .SetCallback(mWatch, HandlePendingIO, reinterpret_cast<intptr_t>(this))); |
| |
| // Once Connecting or Connected, bump the reference count. The corresponding Release() will happen in DoClose(). |
| Retain(); |
| |
| if (conRes == 0) |
| { |
| mState = State::kConnected; |
| // Wait for ability to read on this endpoint. |
| ReturnErrorOnFailure(static_cast<System::LayerSockets &>(GetSystemLayer()).RequestCallbackOnPendingRead(mWatch)); |
| if (OnConnectComplete != nullptr) |
| { |
| OnConnectComplete(this, CHIP_NO_ERROR); |
| } |
| } |
| else |
| { |
| mState = State::kConnecting; |
| // Wait for ability to write on this endpoint. |
| ReturnErrorOnFailure(static_cast<System::LayerSockets &>(GetSystemLayer()).RequestCallbackOnPendingWrite(mWatch)); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::GetPeerInfo(IPAddress * retAddr, uint16_t * retPort) const |
| { |
| return GetSocketInfo(getpeername, retAddr, retPort); |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::GetLocalInfo(IPAddress * retAddr, uint16_t * retPort) const |
| { |
| return GetSocketInfo(getsockname, retAddr, retPort); |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::GetSocketInfo(int getname(int, sockaddr *, socklen_t *), IPAddress * retAddr, |
| uint16_t * retPort) const |
| { |
| VerifyOrReturnError(IsConnected(), CHIP_ERROR_INCORRECT_STATE); |
| |
| SockAddr sa; |
| memset(&sa, 0, sizeof(sa)); |
| socklen_t saLen = sizeof(sa); |
| |
| if (getname(mSocket, &sa.any, &saLen) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| if (sa.any.sa_family == AF_INET6) |
| { |
| *retAddr = IPAddress(sa.in6.sin6_addr); |
| *retPort = ntohs(sa.in6.sin6_port); |
| return CHIP_NO_ERROR; |
| } |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| if (sa.any.sa_family == AF_INET) |
| { |
| *retAddr = IPAddress(sa.in.sin_addr); |
| *retPort = ntohs(sa.in.sin_port); |
| return CHIP_NO_ERROR; |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::GetInterfaceId(InterfaceId * retInterface) |
| { |
| VerifyOrReturnError(IsConnected(), CHIP_ERROR_INCORRECT_STATE); |
| |
| SockAddr sa; |
| memset(&sa, 0, sizeof(sa)); |
| socklen_t saLen = sizeof(sa); |
| |
| if (getpeername(mSocket, &sa.any, &saLen) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| if (sa.any.sa_family == AF_INET6) |
| { |
| if (IPAddress(sa.in6.sin6_addr).IsIPv6LinkLocal()) |
| { |
| *retInterface = InterfaceId(sa.in6.sin6_scope_id); |
| } |
| else |
| { |
| // TODO: Is there still a meaningful interface id in this case? |
| *retInterface = InterfaceId::Null(); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| if (sa.any.sa_family == AF_INET) |
| { |
| // No interface id available for IPv4 sockets. |
| *retInterface = InterfaceId::Null(); |
| return CHIP_NO_ERROR; |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| |
| *retInterface = InterfaceId::Null(); |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::SendQueuedImpl(bool queueWasEmpty) |
| { |
| if (queueWasEmpty) |
| { |
| // Wait for ability to write on this endpoint. |
| return static_cast<System::LayerSockets &>(GetSystemLayer()).RequestCallbackOnPendingWrite(mWatch); |
| } |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::EnableNoDelay() |
| { |
| VerifyOrReturnError(IsConnected(), CHIP_ERROR_INCORRECT_STATE); |
| |
| #ifdef TCP_NODELAY |
| // Disable TCP Nagle buffering by setting TCP_NODELAY socket option to true |
| int val = 1; |
| if (setsockopt(mSocket, TCP_SOCKOPT_LEVEL, TCP_NODELAY, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| #endif // defined(TCP_NODELAY) |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::EnableKeepAlive(uint16_t interval, uint16_t timeoutCount) |
| { |
| VerifyOrReturnError(IsConnected(), CHIP_ERROR_INCORRECT_STATE); |
| |
| // Set the idle interval |
| int val = interval; |
| if (setsockopt(mSocket, TCP_SOCKOPT_LEVEL, TCP_IDLE_INTERVAL_OPT_NAME, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| // Set the probe retransmission interval. |
| val = interval; |
| if (setsockopt(mSocket, TCP_SOCKOPT_LEVEL, TCP_KEEPINTVL, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| // Set the probe timeout count |
| val = timeoutCount; |
| if (setsockopt(mSocket, TCP_SOCKOPT_LEVEL, TCP_KEEPCNT, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| // Enable keepalives for the connection. |
| val = 1; // enable |
| if (setsockopt(mSocket, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::DisableKeepAlive() |
| { |
| VerifyOrReturnError(IsConnected(), CHIP_ERROR_INCORRECT_STATE); |
| |
| // Disable keepalives on the connection. |
| int val = 0; // disable |
| if (setsockopt(mSocket, SOL_SOCKET, SO_KEEPALIVE, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::AckReceive(uint16_t len) |
| { |
| VerifyOrReturnError(IsConnected(), CHIP_ERROR_INCORRECT_STATE); |
| |
| // nothing to do for sockets case |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::SetUserTimeoutImpl(uint32_t userTimeoutMillis) |
| { |
| #if defined(TCP_USER_TIMEOUT) |
| // Set the user timeout |
| uint32_t val = userTimeoutMillis; |
| if (setsockopt(mSocket, TCP_SOCKOPT_LEVEL, TCP_USER_TIMEOUT, &val, sizeof(val)) != 0) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| return CHIP_NO_ERROR; |
| #else // TCP_USER_TIMEOUT |
| return CHIP_ERROR_NOT_IMPLEMENTED; |
| #endif // defined(TCP_USER_TIMEOUT) |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::DriveSendingImpl() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| #ifdef MSG_NOSIGNAL |
| const int sendFlags = MSG_NOSIGNAL; |
| #else |
| const int sendFlags = 0; |
| #endif |
| |
| // Pretend send() fails in the while loop below |
| INET_FAULT_INJECT(FaultInjection::kFault_Send, { |
| err = CHIP_ERROR_POSIX(EIO); |
| DoClose(err, false); |
| return err; |
| }); |
| |
| while (!mSendQueue.IsNull()) |
| { |
| uint16_t bufLen = mSendQueue->DataLength(); |
| |
| ssize_t lenSentRaw = send(mSocket, mSendQueue->Start(), bufLen, sendFlags); |
| |
| if (lenSentRaw == -1) |
| { |
| if (errno != EAGAIN && errno != EWOULDBLOCK) |
| { |
| err = (errno == EPIPE) ? INET_ERROR_PEER_DISCONNECTED : CHIP_ERROR_POSIX(errno); |
| } |
| break; |
| } |
| |
| if (lenSentRaw < 0 || lenSentRaw > bufLen) |
| { |
| err = CHIP_ERROR_INCORRECT_STATE; |
| break; |
| } |
| |
| // Cast is safe because bufLen is uint16_t. |
| uint16_t lenSent = static_cast<uint16_t>(lenSentRaw); |
| |
| // Mark the connection as being active. |
| MarkActive(); |
| |
| if (lenSent < bufLen) |
| { |
| mSendQueue->ConsumeHead(lenSent); |
| } |
| else |
| { |
| mSendQueue.FreeHead(); |
| if (mSendQueue.IsNull()) |
| { |
| // Do not wait for ability to write on this endpoint. |
| err = static_cast<System::LayerSockets &>(GetSystemLayer()).ClearCallbackOnPendingWrite(mWatch); |
| if (err != CHIP_NO_ERROR) |
| { |
| break; |
| } |
| } |
| } |
| |
| if (OnDataSent != nullptr) |
| { |
| OnDataSent(this, lenSent); |
| } |
| |
| #if INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| mBytesWrittenSinceLastProbe += lenSent; |
| |
| bool isProgressing = false; |
| |
| err = CheckConnectionProgress(isProgressing); |
| if (err != CHIP_NO_ERROR) |
| { |
| break; |
| } |
| |
| if (!mUserTimeoutTimerRunning) |
| { |
| // Timer was not running before this write. So, start |
| // the timer. |
| |
| StartTCPUserTimeoutTimer(); |
| } |
| else if (isProgressing) |
| { |
| // Progress is being made. So, shift the timer |
| // forward if it was started. |
| |
| RestartTCPUserTimeoutTimer(); |
| } |
| #endif // INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| |
| if (lenSent < bufLen) |
| { |
| break; |
| } |
| } |
| |
| if (err == CHIP_NO_ERROR) |
| { |
| // If we're in the SendShutdown state and the send queue is now empty, shutdown writing on the socket. |
| if (mState == State::kSendShutdown && mSendQueue.IsNull()) |
| { |
| if (shutdown(mSocket, SHUT_WR) != 0) |
| { |
| err = CHIP_ERROR_POSIX(errno); |
| } |
| } |
| } |
| |
| return err; |
| } |
| |
| void TCPEndPointImplSockets::HandleConnectCompleteImpl() |
| { |
| // Wait for ability to read or write on this endpoint. |
| CHIP_ERROR err = static_cast<System::LayerSockets &>(GetSystemLayer()).RequestCallbackOnPendingRead(mWatch); |
| if (err == CHIP_NO_ERROR) |
| { |
| err = static_cast<System::LayerSockets &>(GetSystemLayer()).RequestCallbackOnPendingWrite(mWatch); |
| } |
| if (err != CHIP_NO_ERROR) |
| { |
| DoClose(err, false); |
| return; |
| } |
| } |
| |
| void TCPEndPointImplSockets::DoCloseImpl(CHIP_ERROR err, State oldState) |
| { |
| struct linger lingerStruct; |
| |
| // If the socket hasn't been closed already... |
| if (mSocket != kInvalidSocketFd) |
| { |
| // If entering the Closed state |
| // OR if entering the Closing state, and there's no unsent data in the send queue |
| // THEN close the socket. |
| if (mState == State::kClosed || (mState == State::kClosing && mSendQueue.IsNull())) |
| { |
| // If aborting the connection, ensure we send a TCP RST. |
| if (IsConnected(oldState) && err != CHIP_NO_ERROR) |
| { |
| lingerStruct.l_onoff = 1; |
| lingerStruct.l_linger = 0; |
| |
| if (setsockopt(mSocket, SOL_SOCKET, SO_LINGER, &lingerStruct, sizeof(lingerStruct)) != 0) |
| { |
| ChipLogError(Inet, "SO_LINGER: %d", errno); |
| } |
| } |
| |
| static_cast<System::LayerSockets &>(GetSystemLayer()).StopWatchingSocket(&mWatch); |
| close(mSocket); |
| mSocket = kInvalidSocketFd; |
| } |
| } |
| } |
| |
| #if INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| void TCPEndPointImplSockets::TCPUserTimeoutHandler() |
| { |
| // Set the timer running flag to false |
| mUserTimeoutTimerRunning = false; |
| |
| bool isProgressing = false; |
| CHIP_ERROR err = CheckConnectionProgress(isProgressing); |
| |
| if (err == CHIP_NO_ERROR && mLastTCPKernelSendQueueLen != 0) |
| { |
| // There is data in the TCP Send Queue |
| if (isProgressing) |
| { |
| // Data is flowing, so restart the UserTimeout timer |
| // to shift it forward while also resetting the max |
| // poll count. |
| |
| StartTCPUserTimeoutTimer(); |
| } |
| else |
| { |
| // Close the connection as the TCP UserTimeout has expired |
| err = INET_ERROR_TCP_USER_TIMEOUT; |
| } |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| // Close the connection as the TCP UserTimeout has expired |
| DoClose(err, false); |
| } |
| } |
| #endif // INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| |
| CHIP_ERROR TCPEndPointImplSockets::BindSrcAddrFromIntf(IPAddressType addrType, InterfaceId intfId) |
| { |
| // If we are trying to make a TCP connection over a 'specified target interface', |
| // then we bind the TCPEndPoint to an IP address on that target interface |
| // and use that address as the source address for that connection. This is |
| // done in the event that directly binding the connection to the target |
| // interface is not allowed due to insufficient privileges. |
| VerifyOrReturnError(mState != State::kBound, CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| bool ipAddrFound = false; |
| for (InterfaceAddressIterator addrIter; addrIter.HasCurrent(); addrIter.Next()) |
| { |
| IPAddress curAddr; |
| if ((addrIter.GetInterfaceId() == intfId) && (addrIter.GetAddress(curAddr) == CHIP_NO_ERROR)) |
| { |
| // Search for an IPv4 address on the TargetInterface |
| |
| #if INET_CONFIG_ENABLE_IPV4 |
| if (addrType == IPAddressType::kIPv4) |
| { |
| if (curAddr.IsIPv4()) |
| { |
| // Bind to the IPv4 address of the TargetInterface |
| ipAddrFound = true; |
| ReturnErrorOnFailure(Bind(IPAddressType::kIPv4, curAddr, 0, true)); |
| |
| break; |
| } |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| if (addrType == IPAddressType::kIPv6) |
| { |
| // Select an IPv6 address on the interface that is not |
| // a link local or a multicast address. |
| // TODO: Define a proper IPv6GlobalUnicast address checker. |
| if (!curAddr.IsIPv4() && !curAddr.IsIPv6LinkLocal() && !curAddr.IsMulticast()) |
| { |
| // Bind to the IPv6 address of the TargetInterface |
| ipAddrFound = true; |
| ReturnErrorOnFailure(Bind(IPAddressType::kIPv6, curAddr, 0, true)); |
| |
| break; |
| } |
| } |
| } |
| } |
| |
| VerifyOrReturnError(ipAddrFound, CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR TCPEndPointImplSockets::GetSocket(IPAddressType addrType) |
| { |
| if (mSocket == kInvalidSocketFd) |
| { |
| int family; |
| if (addrType == IPAddressType::kIPv6) |
| { |
| family = PF_INET6; |
| #if INET_CONFIG_ENABLE_IPV4 |
| } |
| else if (addrType == IPAddressType::kIPv4) |
| { |
| family = PF_INET; |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| } |
| else |
| { |
| return INET_ERROR_WRONG_ADDRESS_TYPE; |
| } |
| mSocket = ::socket(family, SOCK_STREAM | SOCK_CLOEXEC, 0); |
| if (mSocket == -1) |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| ReturnErrorOnFailure(static_cast<System::LayerSockets &>(GetSystemLayer()).StartWatchingSocket(mSocket, &mWatch)); |
| mAddrType = addrType; |
| |
| // If creating an IPv6 socket, tell the kernel that it will be IPv6 only. This makes it |
| // posible to bind two sockets to the same port, one for IPv4 and one for IPv6. |
| #ifdef IPV6_V6ONLY |
| if (family == PF_INET6) |
| { |
| int one = 1; |
| setsockopt(mSocket, IPPROTO_IPV6, IPV6_V6ONLY, &one, sizeof(one)); |
| } |
| #endif // defined(IPV6_V6ONLY) |
| |
| // On systems that support it, disable the delivery of SIGPIPE signals when writing to a closed |
| // socket. |
| #ifdef SO_NOSIGPIPE |
| { |
| int one = 1; |
| int res = setsockopt(mSocket, SOL_SOCKET, SO_NOSIGPIPE, &one, sizeof(one)); |
| if (res != 0) |
| { |
| ChipLogError(Inet, "SO_NOSIGPIPE: %d", errno); |
| } |
| } |
| #endif // defined(SO_NOSIGPIPE) |
| } |
| else if (mAddrType != addrType) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| // static |
| void TCPEndPointImplSockets::HandlePendingIO(System::SocketEvents events, intptr_t data) |
| { |
| reinterpret_cast<TCPEndPointImplSockets *>(data)->HandlePendingIO(events); |
| } |
| |
| void TCPEndPointImplSockets::HandlePendingIO(System::SocketEvents events) |
| { |
| // Prevent the end point from being freed while in the middle of a callback. |
| Retain(); |
| |
| // If in the Listening state, and the app is ready to receive a connection, and there is a connection |
| // ready to be received on the socket, process the incoming connection. |
| if (mState == State::kListening) |
| { |
| if (OnConnectionReceived != nullptr && events.Has(System::SocketEventFlags::kRead)) |
| { |
| HandleIncomingConnection(); |
| } |
| } |
| |
| // If in the processes of initiating a connection... |
| else if (mState == State::kConnecting) |
| { |
| // The socket being writable indicates the connection has completed (successfully or otherwise). |
| if (events.Has(System::SocketEventFlags::kWrite)) |
| { |
| #ifndef __MBED__ |
| // Get the connection result from the socket. |
| int osConRes; |
| socklen_t optLen = sizeof(osConRes); |
| if (getsockopt(mSocket, SOL_SOCKET, SO_ERROR, &osConRes, &optLen) != 0) |
| { |
| osConRes = errno; |
| } |
| #else // __MBED__ |
| // On Mbed OS, connect blocks and never returns EINPROGRESS |
| // The socket option SO_ERROR is not available. |
| int osConRes = 0; |
| #endif // !__MBED__ |
| CHIP_ERROR conRes = CHIP_ERROR_POSIX(osConRes); |
| |
| // Process the connection result. |
| HandleConnectComplete(conRes); |
| } |
| } |
| |
| else |
| { |
| // If in a state where sending is allowed, and there is data to be sent, and the socket is ready for |
| // writing, drive outbound data into the connection. |
| if (IsConnected() && !mSendQueue.IsNull() && events.Has(System::SocketEventFlags::kWrite)) |
| { |
| DriveSending(); |
| } |
| |
| // If in a state were receiving is allowed, and the app is ready to receive data, and data is ready |
| // on the socket, receive inbound data from the connection. |
| if ((mState == State::kConnected || mState == State::kSendShutdown) && mReceiveEnabled && OnDataReceived != nullptr && |
| events.Has(System::SocketEventFlags::kRead)) |
| { |
| ReceiveData(); |
| } |
| } |
| |
| Release(); |
| } |
| |
| void TCPEndPointImplSockets::ReceiveData() |
| { |
| System::PacketBufferHandle rcvBuf; |
| bool isNewBuf = true; |
| |
| if (mRcvQueue.IsNull()) |
| { |
| rcvBuf = System::PacketBufferHandle::New(kMaxReceiveMessageSize, 0); |
| } |
| else |
| { |
| rcvBuf = mRcvQueue->Last(); |
| if (rcvBuf->AvailableDataLength() == 0) |
| { |
| rcvBuf = System::PacketBufferHandle::New(kMaxReceiveMessageSize, 0); |
| } |
| else |
| { |
| isNewBuf = false; |
| rcvBuf->CompactHead(); |
| } |
| } |
| |
| if (rcvBuf.IsNull()) |
| { |
| DoClose(CHIP_ERROR_NO_MEMORY, false); |
| return; |
| } |
| |
| // Attempt to receive data from the socket. |
| ssize_t rcvLen = recv(mSocket, rcvBuf->Start() + rcvBuf->DataLength(), rcvBuf->AvailableDataLength(), 0); |
| |
| #if INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| CHIP_ERROR err; |
| bool isProgressing = false; |
| |
| err = CheckConnectionProgress(isProgressing); |
| if (err != CHIP_NO_ERROR) |
| { |
| DoClose(err, false); |
| |
| return; |
| } |
| |
| if (mLastTCPKernelSendQueueLen == 0) |
| { |
| // If the output queue has been flushed then stop the timer. |
| |
| StopTCPUserTimeoutTimer(); |
| } |
| else if (isProgressing && mUserTimeoutTimerRunning) |
| { |
| // Progress is being made. So, shift the timer |
| // forward if it was started. |
| RestartTCPUserTimeoutTimer(); |
| } |
| #endif // INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| // If an error occurred, abort the connection. |
| if (rcvLen < 0) |
| { |
| int systemErrno = errno; |
| if (systemErrno == EAGAIN) |
| { |
| // Note: in this case, we opt to not retry the recv call, |
| // and instead we expect that the read flags will get |
| // reset correctly upon a subsequent return from the |
| // select call. |
| ChipLogError(Inet, "recv: EAGAIN, will retry"); |
| |
| return; |
| } |
| |
| DoClose(CHIP_ERROR_POSIX(systemErrno), false); |
| } |
| |
| else |
| { |
| // Mark the connection as being active. |
| MarkActive(); |
| |
| // If the peer closed their end of the connection... |
| if (rcvLen == 0) |
| { |
| // If in the Connected state and the app has provided an OnPeerClose callback, |
| // enter the ReceiveShutdown state. Providing an OnPeerClose callback allows |
| // the app to decide whether to keep the send side of the connection open after |
| // the peer has closed. If no OnPeerClose is provided, we assume that the app |
| // wants to close both directions and automatically enter the Closing state. |
| if (mState == State::kConnected && OnPeerClose != nullptr) |
| { |
| mState = State::kReceiveShutdown; |
| } |
| else |
| { |
| mState = State::kClosing; |
| } |
| // Do not wait for ability to read on this endpoint. |
| (void) static_cast<System::LayerSockets &>(GetSystemLayer()).ClearCallbackOnPendingRead(mWatch); |
| // Call the app's OnPeerClose. |
| if (OnPeerClose != nullptr) |
| { |
| OnPeerClose(this); |
| } |
| } |
| |
| // Otherwise, add the new data onto the receive queue. |
| else |
| { |
| VerifyOrDie(rcvLen > 0); |
| size_t newDataLength = rcvBuf->DataLength() + static_cast<size_t>(rcvLen); |
| VerifyOrDie(CanCastTo<uint16_t>(newDataLength)); |
| if (isNewBuf) |
| { |
| rcvBuf->SetDataLength(static_cast<uint16_t>(newDataLength)); |
| rcvBuf.RightSize(); |
| if (mRcvQueue.IsNull()) |
| { |
| mRcvQueue = std::move(rcvBuf); |
| } |
| else |
| { |
| mRcvQueue->AddToEnd(std::move(rcvBuf)); |
| } |
| } |
| else |
| { |
| rcvBuf->SetDataLength(static_cast<uint16_t>(newDataLength), mRcvQueue); |
| } |
| } |
| } |
| |
| // Drive any received data into the app. |
| DriveReceiving(); |
| } |
| |
| void TCPEndPointImplSockets::HandleIncomingConnection() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| TCPEndPointImplSockets * conEP = nullptr; |
| IPAddress peerAddr; |
| uint16_t peerPort; |
| |
| SockAddr sa; |
| memset(&sa, 0, sizeof(sa)); |
| socklen_t saLen = sizeof(sa); |
| |
| // Accept the new connection. |
| int conSocket = accept(mSocket, &sa.any, &saLen); |
| if (conSocket == -1) |
| { |
| if (errno == EAGAIN || errno == EWOULDBLOCK) |
| { |
| return; |
| } |
| |
| err = CHIP_ERROR_POSIX(errno); |
| } |
| |
| // If there's no callback available, fail with an error. |
| if (err == CHIP_NO_ERROR && OnConnectionReceived == nullptr) |
| { |
| err = CHIP_ERROR_NO_CONNECTION_HANDLER; |
| } |
| |
| // Extract the peer's address information. |
| if (err == CHIP_NO_ERROR) |
| { |
| if (sa.any.sa_family == AF_INET6) |
| { |
| peerAddr = IPAddress(sa.in6.sin6_addr); |
| peerPort = ntohs(sa.in6.sin6_port); |
| } |
| #if INET_CONFIG_ENABLE_IPV4 |
| else if (sa.any.sa_family == AF_INET) |
| { |
| peerAddr = IPAddress(sa.in.sin_addr); |
| peerPort = ntohs(sa.in.sin_port); |
| } |
| #endif // INET_CONFIG_ENABLE_IPV4 |
| else |
| { |
| err = CHIP_ERROR_INCORRECT_STATE; |
| } |
| } |
| |
| // Attempt to allocate an end point object. |
| if (err == CHIP_NO_ERROR) |
| { |
| TCPEndPoint * connectEndPoint = nullptr; |
| err = GetEndPointManager().NewEndPoint(&connectEndPoint); |
| conEP = static_cast<TCPEndPointImplSockets *>(connectEndPoint); |
| } |
| |
| // If all went well... |
| if (err == CHIP_NO_ERROR) |
| { |
| // Put the new end point into the Connected state. |
| conEP->mSocket = conSocket; |
| err = static_cast<System::LayerSockets &>(GetSystemLayer()).StartWatchingSocket(conSocket, &conEP->mWatch); |
| if (err == CHIP_NO_ERROR) |
| { |
| conEP->mState = State::kConnected; |
| #if INET_CONFIG_ENABLE_IPV4 |
| conEP->mAddrType = (sa.any.sa_family == AF_INET6) ? IPAddressType::kIPv6 : IPAddressType::kIPv4; |
| #else // !INET_CONFIG_ENABLE_IPV4 |
| conEP->mAddrType = IPAddressType::kIPv6; |
| #endif // !INET_CONFIG_ENABLE_IPV4 |
| conEP->Retain(); |
| |
| // Wait for ability to read on this endpoint. |
| auto & conEPLayer = static_cast<System::LayerSockets &>(conEP->GetSystemLayer()); |
| err = conEPLayer.SetCallback(conEP->mWatch, HandlePendingIO, reinterpret_cast<intptr_t>(conEP)); |
| if (err == CHIP_NO_ERROR) |
| { |
| err = conEPLayer.RequestCallbackOnPendingRead(conEP->mWatch); |
| } |
| if (err == CHIP_NO_ERROR) |
| { |
| // Call the app's callback function. |
| OnConnectionReceived(this, conEP, peerAddr, peerPort); |
| return; |
| } |
| } |
| } |
| |
| // Otherwise immediately close the connection, clean up and call the app's error callback. |
| if (conSocket != -1) |
| { |
| close(conSocket); |
| } |
| if (conEP != nullptr) |
| { |
| if (conEP->mState == State::kConnected) |
| { |
| conEP->Release(); |
| } |
| conEP->Release(); |
| } |
| if (OnAcceptError != nullptr) |
| { |
| OnAcceptError(this, err); |
| } |
| } |
| |
| #if INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| /** |
| * This function probes the TCP output queue and checks if data is successfully |
| * being transferred to the other end. |
| */ |
| CHIP_ERROR TCPEndPointImplSockets::CheckConnectionProgress(bool & isProgressing) |
| { |
| int currPendingBytesRaw = 0; |
| uint32_t currPendingBytes; // Will be initialized once we know it's safe. |
| |
| // Fetch the bytes pending successful transmission in the TCP out queue. |
| |
| #ifdef __APPLE__ |
| socklen_t len = sizeof(currPendingBytesRaw); |
| if (getsockopt(mSocket, SOL_SOCKET, SO_NWRITE, &currPendingBytesRaw, &len) < 0) |
| #else |
| if (ioctl(mSocket, TIOCOUTQ, &currPendingBytesRaw) < 0) |
| #endif |
| { |
| return CHIP_ERROR_POSIX(errno); |
| } |
| |
| if (!CanCastTo<uint32_t>(currPendingBytesRaw)) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| currPendingBytes = static_cast<uint32_t>(currPendingBytesRaw); |
| |
| if ((currPendingBytes != 0) && (mBytesWrittenSinceLastProbe + mLastTCPKernelSendQueueLen == currPendingBytes)) |
| { |
| // No progress has been made |
| |
| isProgressing = false; |
| } |
| else |
| { |
| // Data is flowing successfully |
| |
| isProgressing = true; |
| } |
| |
| // Reset the value of the bytes written since the last probe into the tcp |
| // outqueue was made and update the last tcp outqueue sample. |
| |
| mBytesWrittenSinceLastProbe = 0; |
| |
| mLastTCPKernelSendQueueLen = currPendingBytes; |
| |
| return CHIP_NO_ERROR; |
| } |
| #endif // INET_CONFIG_OVERRIDE_SYSTEM_TCP_USER_TIMEOUT |
| |
| } // namespace Inet |
| } // namespace chip |