| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2014-2017 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file implements objects which provide an abstraction layer between |
| * a platform's Bluetooth Low Energy (BLE) implementation and the CHIP |
| * stack. |
| * |
| * The BleLayer object accepts BLE data and control input from the |
| * application via a functional interface. It performs the fragmentation |
| * and reassembly required to transmit CHIP message via a BLE GATT |
| * characteristic interface, and drives incoming messages up the CHIP |
| * stack. |
| * |
| * During initialization, the BleLayer object requires a pointer to the |
| * platform's implementation of the BlePlatformDelegate and |
| * BleApplicationDelegate objects. |
| * |
| * The BlePlatformDelegate provides the CHIP stack with an interface |
| * by which to form and cancel GATT subscriptions, read and write |
| * GATT characteristic values, send GATT characteristic notifications, |
| * respond to GATT read requests, and close BLE connections. |
| * |
| * The BleApplicationDelegate provides a mechanism for CHIP to inform |
| * the application when it has finished using a given BLE connection, |
| * i.e when the chipConnection object wrapping this connection has |
| * closed. This allows the application to either close the BLE connection |
| * or continue to keep it open for non-CHIP purposes. |
| * |
| * To enable CHIP over BLE for a new platform, the application developer |
| * must provide an implementation for both delegates, provides points to |
| * instances of these delegates on startup, and ensure that the |
| * application calls the necessary BleLayer functions when appropriate to |
| * drive BLE data and control input up the stack. |
| */ |
| |
| #define _CHIP_BLE_BLE_H |
| #include "BleLayer.h" |
| |
| #include <cstring> |
| #include <utility> |
| |
| #include <lib/core/CHIPEncoding.h> |
| #include <lib/support/CodeUtils.h> |
| #include <lib/support/SetupDiscriminator.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <system/SystemLayer.h> |
| #include <system/SystemPacketBuffer.h> |
| |
| #include "BLEEndPoint.h" |
| #include "BleApplicationDelegate.h" |
| #include "BleConfig.h" |
| #include "BleConnectionDelegate.h" |
| #include "BleError.h" |
| #include "BleLayerDelegate.h" |
| #include "BlePlatformDelegate.h" |
| #include "BleRole.h" |
| #include "BleUUID.h" |
| |
| // Magic values expected in first 2 bytes of valid BLE transport capabilities request or response: |
| #define CAPABILITIES_MSG_CHECK_BYTE_1 0b01100101 |
| #define CAPABILITIES_MSG_CHECK_BYTE_2 0b01101100 |
| |
| namespace chip { |
| namespace Ble { |
| |
| class BleEndPointPool |
| { |
| public: |
| int Size() const { return BLE_LAYER_NUM_BLE_ENDPOINTS; } |
| |
| BLEEndPoint * Get(size_t i) const |
| { |
| static union |
| { |
| uint8_t Pool[sizeof(BLEEndPoint) * BLE_LAYER_NUM_BLE_ENDPOINTS]; |
| BLEEndPoint::AlignT ForceAlignment; |
| } sEndPointPool; |
| |
| if (i < BLE_LAYER_NUM_BLE_ENDPOINTS) |
| { |
| return reinterpret_cast<BLEEndPoint *>(sEndPointPool.Pool + (sizeof(BLEEndPoint) * i)); |
| } |
| |
| return nullptr; |
| } |
| |
| BLEEndPoint * Find(BLE_CONNECTION_OBJECT c) const |
| { |
| if (c == BLE_CONNECTION_UNINITIALIZED) |
| { |
| return nullptr; |
| } |
| |
| for (size_t i = 0; i < BLE_LAYER_NUM_BLE_ENDPOINTS; i++) |
| { |
| BLEEndPoint * elem = Get(i); |
| if (elem->mBle != nullptr && elem->mConnObj == c) |
| { |
| return elem; |
| } |
| } |
| |
| return nullptr; |
| } |
| |
| BLEEndPoint * GetFree() const |
| { |
| for (size_t i = 0; i < BLE_LAYER_NUM_BLE_ENDPOINTS; i++) |
| { |
| BLEEndPoint * elem = Get(i); |
| if (elem->mBle == nullptr) |
| { |
| return elem; |
| } |
| } |
| return nullptr; |
| } |
| }; |
| |
| // EndPoint Pools |
| // |
| static BleEndPointPool sBLEEndPointPool; |
| |
| // BleTransportCapabilitiesRequestMessage implementation: |
| |
| void BleTransportCapabilitiesRequestMessage::SetSupportedProtocolVersion(uint8_t index, uint8_t version) |
| { |
| uint8_t mask; |
| |
| // If even-index, store version in lower 4 bits; else, higher 4 bits. |
| if (index % 2 == 0) |
| { |
| mask = 0x0F; |
| } |
| else |
| { |
| mask = 0xF0; |
| version = static_cast<uint8_t>(version << 4); |
| } |
| |
| version &= mask; |
| |
| uint8_t & slot = mSupportedProtocolVersions[(index / 2)]; |
| slot = static_cast<uint8_t>(slot & ~mask); // Clear version at index; leave other version in same byte alone |
| slot |= version; |
| } |
| |
| CHIP_ERROR BleTransportCapabilitiesRequestMessage::Encode(const PacketBufferHandle & msgBuf) const |
| { |
| uint8_t * p = msgBuf->Start(); |
| |
| // Verify we can write the fixed-length request without running into the end of the buffer. |
| VerifyOrReturnError(msgBuf->MaxDataLength() >= kCapabilitiesRequestLength, CHIP_ERROR_NO_MEMORY); |
| |
| chip::Encoding::Write8(p, CAPABILITIES_MSG_CHECK_BYTE_1); |
| chip::Encoding::Write8(p, CAPABILITIES_MSG_CHECK_BYTE_2); |
| |
| for (uint8_t version : mSupportedProtocolVersions) |
| { |
| chip::Encoding::Write8(p, version); |
| } |
| |
| chip::Encoding::LittleEndian::Write16(p, mMtu); |
| chip::Encoding::Write8(p, mWindowSize); |
| |
| msgBuf->SetDataLength(kCapabilitiesRequestLength); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BleTransportCapabilitiesRequestMessage::Decode(const PacketBufferHandle & msgBuf, |
| BleTransportCapabilitiesRequestMessage & msg) |
| { |
| const uint8_t * p = msgBuf->Start(); |
| |
| // Verify we can read the fixed-length request without running into the end of the buffer. |
| VerifyOrReturnError(msgBuf->DataLength() >= kCapabilitiesRequestLength, CHIP_ERROR_MESSAGE_INCOMPLETE); |
| |
| VerifyOrReturnError(CAPABILITIES_MSG_CHECK_BYTE_1 == chip::Encoding::Read8(p), BLE_ERROR_INVALID_MESSAGE); |
| VerifyOrReturnError(CAPABILITIES_MSG_CHECK_BYTE_2 == chip::Encoding::Read8(p), BLE_ERROR_INVALID_MESSAGE); |
| |
| static_assert(kCapabilitiesRequestSupportedVersionsLength == sizeof(msg.mSupportedProtocolVersions), |
| "Expected capability sizes and storage must match"); |
| for (unsigned char & version : msg.mSupportedProtocolVersions) |
| { |
| version = chip::Encoding::Read8(p); |
| } |
| |
| msg.mMtu = chip::Encoding::LittleEndian::Read16(p); |
| msg.mWindowSize = chip::Encoding::Read8(p); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| // BleTransportCapabilitiesResponseMessage implementation: |
| |
| CHIP_ERROR BleTransportCapabilitiesResponseMessage::Encode(const PacketBufferHandle & msgBuf) const |
| { |
| uint8_t * p = msgBuf->Start(); |
| |
| // Verify we can write the fixed-length request without running into the end of the buffer. |
| VerifyOrReturnError(msgBuf->MaxDataLength() >= kCapabilitiesResponseLength, CHIP_ERROR_NO_MEMORY); |
| |
| chip::Encoding::Write8(p, CAPABILITIES_MSG_CHECK_BYTE_1); |
| chip::Encoding::Write8(p, CAPABILITIES_MSG_CHECK_BYTE_2); |
| |
| chip::Encoding::Write8(p, mSelectedProtocolVersion); |
| chip::Encoding::LittleEndian::Write16(p, mFragmentSize); |
| chip::Encoding::Write8(p, mWindowSize); |
| |
| msgBuf->SetDataLength(kCapabilitiesResponseLength); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BleTransportCapabilitiesResponseMessage::Decode(const PacketBufferHandle & msgBuf, |
| BleTransportCapabilitiesResponseMessage & msg) |
| { |
| const uint8_t * p = msgBuf->Start(); |
| |
| // Verify we can read the fixed-length response without running into the end of the buffer. |
| VerifyOrReturnError(msgBuf->DataLength() >= kCapabilitiesResponseLength, CHIP_ERROR_MESSAGE_INCOMPLETE); |
| |
| VerifyOrReturnError(CAPABILITIES_MSG_CHECK_BYTE_1 == chip::Encoding::Read8(p), BLE_ERROR_INVALID_MESSAGE); |
| VerifyOrReturnError(CAPABILITIES_MSG_CHECK_BYTE_2 == chip::Encoding::Read8(p), BLE_ERROR_INVALID_MESSAGE); |
| |
| msg.mSelectedProtocolVersion = chip::Encoding::Read8(p); |
| msg.mFragmentSize = chip::Encoding::LittleEndian::Read16(p); |
| msg.mWindowSize = chip::Encoding::Read8(p); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| // BleLayer implementation: |
| |
| BleLayer::BleLayer() |
| { |
| mState = kState_NotInitialized; |
| } |
| |
| CHIP_ERROR BleLayer::Init(BlePlatformDelegate * platformDelegate, BleConnectionDelegate * connDelegate, |
| BleApplicationDelegate * appDelegate, chip::System::Layer * systemLayer) |
| { |
| Ble::RegisterLayerErrorFormatter(); |
| |
| // It is totally valid to not have a connDelegate. In this case the client application |
| // will take care of the connection steps. |
| VerifyOrReturnError(platformDelegate != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrReturnError(appDelegate != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrReturnError(systemLayer != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| |
| if (mState != kState_NotInitialized) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| mConnectionDelegate = connDelegate; |
| mPlatformDelegate = platformDelegate; |
| mApplicationDelegate = appDelegate; |
| mSystemLayer = systemLayer; |
| |
| memset(&sBLEEndPointPool, 0, sizeof(sBLEEndPointPool)); |
| |
| mState = kState_Initialized; |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BleLayer::Init(BlePlatformDelegate * platformDelegate, BleApplicationDelegate * appDelegate, |
| chip::System::Layer * systemLayer) |
| { |
| return Init(platformDelegate, nullptr, appDelegate, systemLayer); |
| } |
| |
| void BleLayer::IndicateBleClosing() |
| { |
| mState = kState_Disconnecting; |
| } |
| |
| void BleLayer::Shutdown() |
| { |
| mState = kState_NotInitialized; |
| CloseAllBleConnections(); |
| } |
| |
| void BleLayer::CloseAllBleConnections() |
| { |
| // Close and free all BLE end points. |
| for (size_t i = 0; i < BLE_LAYER_NUM_BLE_ENDPOINTS; i++) |
| { |
| BLEEndPoint * elem = sBLEEndPointPool.Get(i); |
| |
| // If end point was initialized, and has not since been freed... |
| if (elem->mBle != nullptr) |
| { |
| // If end point hasn't already been closed... |
| if (elem->mState != BLEEndPoint::kState_Closed) |
| { |
| // Close end point such that callbacks are suppressed and pending transmissions aborted. |
| elem->Abort(); |
| } |
| |
| // If end point was closed, but is still waiting for GATT unsubscribe to complete, free it anyway. |
| // This cancels the unsubscribe timer (plus all the end point's other timers). |
| if (elem->IsUnsubscribePending()) |
| { |
| elem->Free(); |
| } |
| } |
| } |
| } |
| |
| void BleLayer::CloseBleConnection(BLE_CONNECTION_OBJECT connObj) |
| { |
| // Close and free all BLE endpoints. |
| for (size_t i = 0; i < BLE_LAYER_NUM_BLE_ENDPOINTS; i++) |
| { |
| BLEEndPoint * elem = sBLEEndPointPool.Get(i); |
| |
| // If end point was initialized, and has not since been freed... |
| if (elem->mBle != nullptr && elem->ConnectionObjectIs(connObj)) |
| { |
| // If end point hasn't already been closed... |
| if (elem->mState != BLEEndPoint::kState_Closed) |
| { |
| // Close end point such that callbacks are suppressed and pending transmissions aborted. |
| elem->Abort(); |
| } |
| |
| // If end point was closed, but is still waiting for GATT unsubscribe to complete, free it anyway. |
| // This cancels the unsubscribe timer (plus all the end point's other timers). |
| if (elem->IsUnsubscribePending()) |
| { |
| elem->Free(); |
| } |
| } |
| } |
| } |
| |
| CHIP_ERROR BleLayer::CancelBleIncompleteConnection() |
| { |
| VerifyOrReturnError(mState == kState_Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mConnectionDelegate != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| CHIP_ERROR err = mConnectionDelegate->CancelConnection(); |
| if (err == CHIP_ERROR_NOT_IMPLEMENTED) |
| { |
| ChipLogError(Ble, "BleConnectionDelegate::CancelConnection is not implemented."); |
| } |
| return err; |
| } |
| |
| CHIP_ERROR BleLayer::NewBleConnectionByDiscriminator(const SetupDiscriminator & connDiscriminator, void * appState, |
| BleConnectionDelegate::OnConnectionCompleteFunct onSuccess, |
| BleConnectionDelegate::OnConnectionErrorFunct onError) |
| { |
| VerifyOrReturnError(mState == kState_Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mConnectionDelegate != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mBleTransport != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| mConnectionDelegate->OnConnectionComplete = onSuccess; |
| mConnectionDelegate->OnConnectionError = onError; |
| |
| mConnectionDelegate->NewConnection(this, appState == nullptr ? this : appState, connDiscriminator); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BleLayer::NewBleConnectionByObject(BLE_CONNECTION_OBJECT connObj, void * appState, |
| BleConnectionDelegate::OnConnectionCompleteFunct onSuccess, |
| BleConnectionDelegate::OnConnectionErrorFunct onError) |
| { |
| VerifyOrReturnError(mState == kState_Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mConnectionDelegate != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mBleTransport != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| mConnectionDelegate->OnConnectionComplete = onSuccess; |
| mConnectionDelegate->OnConnectionError = onError; |
| |
| mConnectionDelegate->NewConnection(this, appState == nullptr ? this : appState, connObj); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BleLayer::NewBleConnectionByObject(BLE_CONNECTION_OBJECT connObj) |
| { |
| VerifyOrReturnError(mState == kState_Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mBleTransport != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| OnConnectionComplete(this, connObj); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BleLayer::NewBleConnectionByDiscriminators(const Span<const SetupDiscriminator> & discriminators, void * appState, |
| BleConnectionDelegate::OnConnectionByDiscriminatorsCompleteFunct onSuccess, |
| BleConnectionDelegate::OnConnectionErrorFunct onError) |
| { |
| VerifyOrReturnError(mState == kState_Initialized, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mConnectionDelegate != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| VerifyOrReturnError(mBleTransport != nullptr, CHIP_ERROR_INCORRECT_STATE); |
| |
| return mConnectionDelegate->NewConnection(this, appState, discriminators, onSuccess, onError); |
| } |
| |
| CHIP_ERROR BleLayer::NewBleEndPoint(BLEEndPoint ** retEndPoint, BLE_CONNECTION_OBJECT connObj, BleRole role, bool autoClose) |
| { |
| *retEndPoint = nullptr; |
| |
| if (mState != kState_Initialized) |
| { |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| if (connObj == BLE_CONNECTION_UNINITIALIZED) |
| { |
| return CHIP_ERROR_INVALID_ARGUMENT; |
| } |
| |
| *retEndPoint = sBLEEndPointPool.GetFree(); |
| if (*retEndPoint == nullptr) |
| { |
| ChipLogError(Ble, "%s endpoint pool FULL", "Ble"); |
| return CHIP_ERROR_ENDPOINT_POOL_FULL; |
| } |
| |
| (*retEndPoint)->Init(this, connObj, role, autoClose); |
| (*retEndPoint)->mBleTransport = mBleTransport; |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| // Handle remote central's initiation of CHIP over BLE protocol handshake. |
| CHIP_ERROR BleLayer::HandleBleTransportConnectionInitiated(BLE_CONNECTION_OBJECT connObj, PacketBufferHandle && pBuf) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| BLEEndPoint * newEndPoint = nullptr; |
| |
| // Only BLE peripherals can receive GATT writes, so specify this role in our creation of the BLEEndPoint. |
| // Set autoClose = false. Peripherals only notify the application when an end point releases a BLE connection. |
| err = NewBleEndPoint(&newEndPoint, connObj, kBleRole_Peripheral, false); |
| SuccessOrExit(err); |
| |
| newEndPoint->mBleTransport = mBleTransport; |
| |
| err = newEndPoint->Receive(std::move(pBuf)); |
| SuccessOrExit(err); // If we fail here, end point will have already released connection and freed itself. |
| |
| exit: |
| // If we failed to allocate a new end point, release underlying BLE connection. Central's handshake will time out |
| // if the application decides to keep the BLE connection open. |
| if (newEndPoint == nullptr) |
| { |
| mApplicationDelegate->NotifyChipConnectionClosed(connObj); |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(Ble, "HandleChipConnectionReceived failed, err = %" CHIP_ERROR_FORMAT, err.Format()); |
| } |
| |
| return err; |
| } |
| |
| bool BleLayer::HandleWriteReceived(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle && pBuf) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Write received on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_1_UUID, charId), false, ChipLogError(Ble, "Write received on unknown char")); |
| VerifyOrReturnError(!pBuf.IsNull(), false, ChipLogError(Ble, "Write received null buffer")); |
| |
| // Find matching connection end point. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| |
| if (endPoint != nullptr) |
| { |
| CHIP_ERROR err = endPoint->Receive(std::move(pBuf)); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, false, |
| ChipLogError(Ble, "Receive failed, err = %" CHIP_ERROR_FORMAT, err.Format())); |
| } |
| else |
| { |
| CHIP_ERROR err = HandleBleTransportConnectionInitiated(connObj, std::move(pBuf)); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, false, |
| ChipLogError(Ble, "Handle new BLE connection failed, err = %" CHIP_ERROR_FORMAT, err.Format())); |
| } |
| |
| return true; |
| } |
| |
| bool BleLayer::HandleIndicationReceived(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle && pBuf) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Indication received on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_2_UUID, charId), false, ChipLogError(Ble, "Indication received on unknown char")); |
| VerifyOrReturnError(!pBuf.IsNull(), false, ChipLogError(Ble, "Indication received null buffer")); |
| |
| // Find matching connection end point. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturnError(endPoint != nullptr, false, ChipLogDetail(Ble, "No endpoint for received indication")); |
| |
| CHIP_ERROR err = endPoint->Receive(std::move(pBuf)); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, false, ChipLogError(Ble, "Receive failed, err = %" CHIP_ERROR_FORMAT, err.Format())); |
| |
| return true; |
| } |
| |
| bool BleLayer::HandleWriteConfirmation(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Write confirmation on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_1_UUID, charId), false, ChipLogError(Ble, "Write confirmation on unknown char")); |
| |
| HandleAckReceived(connObj); |
| return true; |
| } |
| |
| bool BleLayer::HandleIndicationConfirmation(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Indication confirmation on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_2_UUID, charId), false, |
| ChipLogError(Ble, "Indication confirmation on unknown char")); |
| |
| HandleAckReceived(connObj); |
| return true; |
| } |
| |
| void BleLayer::HandleAckReceived(BLE_CONNECTION_OBJECT connObj) |
| { |
| // Find matching connection end point. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturn(endPoint != nullptr, ChipLogDetail(Ble, "No endpoint for received ack")); |
| |
| CHIP_ERROR err = endPoint->HandleGattSendConfirmationReceived(); |
| VerifyOrReturn(err == CHIP_NO_ERROR, |
| ChipLogError(Ble, "Send ack confirmation failed, err = %" CHIP_ERROR_FORMAT, err.Format())); |
| } |
| |
| bool BleLayer::HandleSubscribeReceived(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Subscribe received on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_2_UUID, charId) || UUIDsMatch(&CHIP_BLE_CHAR_3_UUID, charId), false, |
| ChipLogError(Ble, "Subscribe received on unknown char")); |
| |
| // Find end point already associated with BLE connection, if any. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturnError(endPoint != nullptr, false, ChipLogDetail(Ble, "No endpoint for received subscribe")); |
| |
| endPoint->HandleSubscribeReceived(); |
| return true; |
| } |
| |
| bool BleLayer::HandleSubscribeComplete(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Subscribe complete on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_2_UUID, charId) || UUIDsMatch(&CHIP_BLE_CHAR_3_UUID, charId), false, |
| ChipLogError(Ble, "Subscribe complete on unknown char")); |
| |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturnError(endPoint != nullptr, false, ChipLogDetail(Ble, "No endpoint for subscribe complete")); |
| |
| endPoint->HandleSubscribeComplete(); |
| return true; |
| } |
| |
| bool BleLayer::HandleUnsubscribeReceived(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Unsubscribe received on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_2_UUID, charId) || UUIDsMatch(&CHIP_BLE_CHAR_3_UUID, charId), false, |
| ChipLogError(Ble, "Unsubscribe received on unknown char")); |
| |
| // Find end point already associated with BLE connection, if any. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturnError(endPoint != nullptr, false, ChipLogDetail(Ble, "No endpoint for unsubscribe received")); |
| |
| endPoint->DoClose(kBleCloseFlag_AbortTransmission, BLE_ERROR_CENTRAL_UNSUBSCRIBED); |
| return true; |
| } |
| |
| bool BleLayer::HandleUnsubscribeComplete(BLE_CONNECTION_OBJECT connObj, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_SVC_ID, svcId), false, ChipLogError(Ble, "Unsubscribe complete on unknown svc")); |
| VerifyOrReturnError(UUIDsMatch(&CHIP_BLE_CHAR_2_UUID, charId) || UUIDsMatch(&CHIP_BLE_CHAR_3_UUID, charId), false, |
| ChipLogError(Ble, "Unsubscribe complete on unknown char")); |
| |
| // Find end point already associated with BLE connection, if any. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturnError(endPoint != nullptr, false, ChipLogDetail(Ble, "No endpoint for unsubscribe complete")); |
| |
| endPoint->HandleUnsubscribeComplete(); |
| return true; |
| } |
| |
| void BleLayer::HandleConnectionError(BLE_CONNECTION_OBJECT connObj, CHIP_ERROR err) |
| { |
| // BLE connection has failed somehow, we must find and abort matching connection end point. |
| BLEEndPoint * endPoint = sBLEEndPointPool.Find(connObj); |
| VerifyOrReturn(endPoint != nullptr, ChipLogDetail(Ble, "No endpoint for connection error")); |
| |
| if (err == BLE_ERROR_GATT_UNSUBSCRIBE_FAILED && endPoint->IsUnsubscribePending()) |
| { |
| // If end point was already closed and just waiting for unsubscribe to complete, free it. Call to Free() |
| // stops unsubscribe timer. |
| endPoint->Free(); |
| } |
| else |
| { |
| endPoint->DoClose(kBleCloseFlag_AbortTransmission, err); |
| } |
| } |
| |
| BleTransportProtocolVersion BleLayer::GetHighestSupportedProtocolVersion(const BleTransportCapabilitiesRequestMessage & reqMsg) |
| { |
| BleTransportProtocolVersion retVersion = kBleTransportProtocolVersion_None; |
| |
| uint8_t shift_width = 4; |
| |
| for (int i = 0; i < NUM_SUPPORTED_PROTOCOL_VERSIONS; i++) |
| { |
| shift_width ^= 4; |
| |
| uint8_t version = reqMsg.mSupportedProtocolVersions[(i / 2)]; |
| version = static_cast<uint8_t>((version >> shift_width) & 0x0F); // Grab just the nibble we want. |
| |
| if ((version >= CHIP_BLE_TRANSPORT_PROTOCOL_MIN_SUPPORTED_VERSION) && |
| (version <= CHIP_BLE_TRANSPORT_PROTOCOL_MAX_SUPPORTED_VERSION) && (version > retVersion)) |
| { |
| retVersion = static_cast<BleTransportProtocolVersion>(version); |
| } |
| else if (version == kBleTransportProtocolVersion_None) // Signifies end of supported versions list |
| { |
| break; |
| } |
| } |
| |
| return retVersion; |
| } |
| |
| void BleLayer::OnConnectionComplete(void * appState, BLE_CONNECTION_OBJECT connObj) |
| { |
| BleLayer * layer = reinterpret_cast<BleLayer *>(appState); |
| BLEEndPoint * endPoint = nullptr; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| SuccessOrExit(err = layer->NewBleEndPoint(&endPoint, connObj, kBleRole_Central, true)); |
| layer->mBleTransport->OnBleConnectionComplete(endPoint); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| OnConnectionError(layer, err); |
| } |
| } |
| |
| void BleLayer::OnConnectionError(void * appState, CHIP_ERROR err) |
| { |
| BleLayer * layer = reinterpret_cast<BleLayer *>(appState); |
| layer->mBleTransport->OnBleConnectionError(err); |
| } |
| |
| } /* namespace Ble */ |
| } /* namespace chip */ |
