| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file describes a QRCode Setup Payload class to hold |
| * data enumerated from a byte stream |
| */ |
| |
| #pragma once |
| |
| #include <cstdint> |
| #include <map> |
| #include <string> |
| #include <vector> |
| |
| #include <lib/core/CHIPError.h> |
| #include <lib/core/Optional.h> |
| #include <lib/support/BitFlags.h> |
| #include <lib/support/SetupDiscriminator.h> |
| |
| namespace chip { |
| |
| // See section 5.1.2. QR Code in the Matter specification |
| const int kVersionFieldLengthInBits = 3; |
| const int kVendorIDFieldLengthInBits = 16; |
| const int kProductIDFieldLengthInBits = 16; |
| const int kCommissioningFlowFieldLengthInBits = 2; |
| const int kRendezvousInfoFieldLengthInBits = 8; |
| const int kPayloadDiscriminatorFieldLengthInBits = SetupDiscriminator::kLongBits; |
| const int kSetupPINCodeFieldLengthInBits = 27; |
| const int kPaddingFieldLengthInBits = 4; |
| const int kRawVendorTagLengthInBits = 7; |
| |
| // See section 5.1.3. Manual Pairing Code in the Matter specification |
| const int kManualSetupDiscriminatorFieldLengthInBits = SetupDiscriminator::kShortBits; |
| const int kManualSetupChunk1DiscriminatorMsbitsPos = 0; |
| const int kManualSetupChunk1DiscriminatorMsbitsLength = 2; |
| const int kManualSetupChunk1VidPidPresentBitPos = |
| (kManualSetupChunk1DiscriminatorMsbitsPos + kManualSetupChunk1DiscriminatorMsbitsLength); |
| const int kManualSetupChunk2PINCodeLsbitsPos = 0; |
| const int kManualSetupChunk2PINCodeLsbitsLength = 14; |
| const int kManualSetupChunk2DiscriminatorLsbitsPos = (kManualSetupChunk2PINCodeLsbitsPos + kManualSetupChunk2PINCodeLsbitsLength); |
| const int kManualSetupChunk2DiscriminatorLsbitsLength = 2; |
| const int kManualSetupChunk3PINCodeMsbitsPos = 0; |
| const int kManualSetupChunk3PINCodeMsbitsLength = 13; |
| |
| const int kManualSetupShortCodeCharLength = 10; |
| const int kManualSetupLongCodeCharLength = 20; |
| const int kManualSetupCodeChunk1CharLength = 1; |
| const int kManualSetupCodeChunk2CharLength = 5; |
| const int kManualSetupCodeChunk3CharLength = 4; |
| const int kManualSetupVendorIdCharLength = 5; |
| const int kManualSetupProductIdCharLength = 5; |
| |
| // Spec 5.1.4.2 CHIP-Common Reserved Tags |
| inline constexpr uint8_t kSerialNumberTag = 0x00; |
| inline constexpr uint8_t kPBKDFIterationsTag = 0x01; |
| inline constexpr uint8_t kBPKFSaltTag = 0x02; |
| inline constexpr uint8_t kNumberOFDevicesTag = 0x03; |
| inline constexpr uint8_t kCommissioningTimeoutTag = 0x04; |
| |
| inline constexpr uint32_t kSetupPINCodeMaximumValue = 99999998; |
| inline constexpr uint32_t kSetupPINCodeUndefinedValue = 0; |
| |
| // clang-format off |
| const int kTotalPayloadDataSizeInBits = |
| kVersionFieldLengthInBits + |
| kVendorIDFieldLengthInBits + |
| kProductIDFieldLengthInBits + |
| kCommissioningFlowFieldLengthInBits + |
| kRendezvousInfoFieldLengthInBits + |
| kPayloadDiscriminatorFieldLengthInBits + |
| kSetupPINCodeFieldLengthInBits + |
| kPaddingFieldLengthInBits; |
| // clang-format on |
| |
| const int kTotalPayloadDataSizeInBytes = kTotalPayloadDataSizeInBits / 8; |
| |
| const char * const kQRCodePrefix = "MT:"; |
| |
| /// The rendezvous type this device supports. |
| enum class RendezvousInformationFlag : uint8_t |
| { |
| kNone = 0, ///< Device does not support any method for rendezvous |
| kSoftAP = 1 << 0, ///< Device supports Wi-Fi softAP |
| kBLE = 1 << 1, ///< Device supports BLE |
| kOnNetwork = 1 << 2, ///< Device supports Setup on network |
| }; |
| using RendezvousInformationFlags = chip::BitFlags<RendezvousInformationFlag, uint8_t>; |
| |
| enum class CommissioningFlow : uint8_t |
| { |
| kStandard = 0, ///< Device automatically enters pairing mode upon power-up |
| kUserActionRequired, ///< Device requires a user interaction to enter pairing mode |
| kCustom, ///< Commissioning steps should be retrieved from the distributed compliance ledger |
| }; |
| |
| /** |
| * A parent struct to hold onboarding payload contents without optional info, |
| * for compatibility with devices that don't support std::string or STL. |
| */ |
| struct PayloadContents |
| { |
| uint8_t version = 0; |
| uint16_t vendorID = 0; |
| uint16_t productID = 0; |
| CommissioningFlow commissioningFlow = CommissioningFlow::kStandard; |
| // rendezvousInformation is Optional, because a payload parsed from a manual |
| // numeric code would not have any rendezvousInformation available. A |
| // payload parsed from a QR code would always have a value for |
| // rendezvousInformation. |
| Optional<RendezvousInformationFlags> rendezvousInformation; |
| SetupDiscriminator discriminator; |
| uint32_t setUpPINCode = 0; |
| |
| bool isValidQRCodePayload() const; |
| bool isValidManualCode() const; |
| bool operator==(const PayloadContents & input) const; |
| |
| static bool IsValidSetupPIN(uint32_t setupPIN); |
| |
| private: |
| bool CheckPayloadCommonConstraints() const; |
| }; |
| |
| enum optionalQRCodeInfoType |
| { |
| optionalQRCodeInfoTypeUnknown, |
| optionalQRCodeInfoTypeString, |
| optionalQRCodeInfoTypeInt32, |
| optionalQRCodeInfoTypeInt64, |
| optionalQRCodeInfoTypeUInt32, |
| optionalQRCodeInfoTypeUInt64 |
| }; |
| |
| /** |
| * A structure to hold optional QR Code info |
| */ |
| struct OptionalQRCodeInfo |
| { |
| /*@{*/ |
| uint8_t tag; /**< the tag number of the optional info */ |
| enum optionalQRCodeInfoType type; /**< the type (String or Int) of the optional info */ |
| std::string data; /**< the string value if type is optionalQRCodeInfoTypeString, otherwise should not be set */ |
| int32_t int32 = 0; /**< the integer value if type is optionalQRCodeInfoTypeInt32, otherwise should not be set */ |
| /*@}*/ |
| }; |
| |
| struct OptionalQRCodeInfoExtension : OptionalQRCodeInfo |
| { |
| int64_t int64 = 0; /**< the integer value if type is optionalQRCodeInfoTypeInt64, otherwise should not be set */ |
| uint64_t uint32 = 0; /**< the integer value if type is optionalQRCodeInfoTypeUInt32, otherwise should not be set */ |
| uint64_t uint64 = 0; /**< the integer value if type is optionalQRCodeInfoTypeUInt64, otherwise should not be set */ |
| }; |
| |
| class SetupPayload : public PayloadContents |
| { |
| |
| friend class QRCodeSetupPayloadGenerator; |
| friend class QRCodeSetupPayloadParser; |
| |
| public: |
| /** @brief A function to add an optional vendor data |
| * @param tag tag number in the [0x80-0xFF] range |
| * @param data String representation of data to add |
| * @return Returns a CHIP_ERROR on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR addOptionalVendorData(uint8_t tag, std::string data); |
| |
| /** @brief A function to add an optional vendor data |
| * @param tag tag number in the [0x80-0xFF] range |
| * @param data Integer representation of data to add |
| * @return Returns a CHIP_ERROR on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR addOptionalVendorData(uint8_t tag, int32_t data); |
| |
| /** @brief A function to remove an optional vendor data |
| * @param tag tag number in the [0x80-0xFF] range |
| * @return Returns a CHIP_ERROR_KEY_NOT_FOUND on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR removeOptionalVendorData(uint8_t tag); |
| |
| /** @brief A function to retrieve an optional QR Code info vendor object |
| * @param tag tag number in the [0x80-0xFF] range |
| * @param info retrieved OptionalQRCodeInfo object |
| * @return Returns a CHIP_ERROR_KEY_NOT_FOUND on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR getOptionalVendorData(uint8_t tag, OptionalQRCodeInfo & info) const; |
| |
| /** |
| * @brief A function to retrieve the vector of OptionalQRCodeInfo infos |
| * @return Returns a vector of optionalQRCodeInfos |
| **/ |
| std::vector<OptionalQRCodeInfo> getAllOptionalVendorData() const; |
| |
| /** @brief A function to add a string serial number |
| * @param serialNumber string serial number |
| * @return Returns a CHIP_ERROR on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR addSerialNumber(std::string serialNumber); |
| |
| /** @brief A function to add a uint32_t serial number |
| * @param serialNumber uint32_t serial number |
| * @return Returns a CHIP_ERROR on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR addSerialNumber(uint32_t serialNumber); |
| |
| /** @brief A function to retrieve serial number as a string |
| * @param outSerialNumber retrieved string serial number |
| * @return Returns a CHIP_ERROR on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR getSerialNumber(std::string & outSerialNumber) const; |
| |
| /** @brief A function to remove the serial number from the payload |
| * @return Returns a CHIP_ERROR_KEY_NOT_FOUND on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR removeSerialNumber(); |
| |
| bool operator==(const SetupPayload & input) const; |
| |
| /** @brief Checks if the tag is CHIP Common type |
| * @param tag Tag to be checked |
| * @return Returns True if the tag is of Common type |
| **/ |
| static bool IsCommonTag(uint8_t tag) { return tag < 0x80; } |
| |
| /** @brief Checks if the tag is vendor-specific |
| * @param tag Tag to be checked |
| * @return Returns True if the tag is Vendor-specific |
| **/ |
| static bool IsVendorTag(uint8_t tag) { return !IsCommonTag(tag); } |
| |
| private: |
| std::map<uint8_t, OptionalQRCodeInfo> optionalVendorData; |
| std::map<uint8_t, OptionalQRCodeInfoExtension> optionalExtensionData; |
| |
| /** @brief A function to add an optional QR Code info vendor object |
| * @param info Optional QR code info object to add |
| * @return Returns a CHIP_ERROR_INVALID_ARGUMENT on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR addOptionalVendorData(const OptionalQRCodeInfo & info); |
| |
| /** @brief A function to add an optional QR Code info CHIP object |
| * @param info Optional QR code info object to add |
| * @return Returns a CHIP_ERROR_INVALID_ARGUMENT on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR addOptionalExtensionData(const OptionalQRCodeInfoExtension & info); |
| |
| /** |
| * @brief A function to retrieve the vector of CHIPQRCodeInfo infos |
| * @return Returns a vector of CHIPQRCodeInfos |
| **/ |
| std::vector<OptionalQRCodeInfoExtension> getAllOptionalExtensionData() const; |
| |
| /** @brief A function to retrieve an optional QR Code info extended object |
| * @param tag 8 bit [128-255] tag number |
| * @param info retrieved OptionalQRCodeInfoExtension object |
| * @return Returns a CHIP_ERROR_KEY_NOT_FOUND on error, CHIP_NO_ERROR otherwise |
| **/ |
| CHIP_ERROR getOptionalExtensionData(uint8_t tag, OptionalQRCodeInfoExtension & info) const; |
| |
| /** @brief A function to retrieve the associated expected numeric value for a tag |
| * @param tag 8 bit [0-255] tag number |
| * @return Returns an optionalQRCodeInfoType value |
| **/ |
| optionalQRCodeInfoType getNumericTypeFor(uint8_t tag) const; |
| }; |
| |
| } // namespace chip |