| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.11. [TC-CADMIN-1.11] Open commissioning window on DUT twice using ECM |
| then BCM [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| - CADMIN.S.F00 |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Precondition" |
| verification: | |
| Reset Devices to factory defaults |
| disabled: true |
| |
| - label: "Step 1: TH_CR1 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| "1. Provision the DUT_CE (all-cluster-app) device using TH_CR1 (chip-tool ) on the raspi" |
| disabled: true |
| |
| - label: |
| "Step 2: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| disabled: true |
| |
| - label: "Step 3: DNS-SD records shows DUT_CE advertising" |
| verification: | |
| On TH_CR1 send the below command |
| |
| avahi-browse -rt _matterc._udp |
| + wlp5s0 IPv6 C326228BDB082BF4 _matterc._udp local |
| + wlp5s0 IPv6 7B6545A75C5330BE _matterc._udp local |
| = wlp5s0 IPv6 7B6545A75C5330BE _matterc._udp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2755] |
| port = [5540] |
| txt = ["PI=" "PH=33" "CM=1" "D=3841" "T=1" "CRA=300" "CRI=5000" "VP=65521+32769"] |
| = wlp5s0 IPv6 C326228BDB082BF4 _matterc._udp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2755] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=2" "D=3840" "T=1" "CRA=300" "CRI=5000" "VP=65521+32769"] |
| grl@grl-ThinkPad-L480:~/2nd_cntrl/connectedhomeip/examples/chip-tool/out/debug$ On TH_CR1 send the below command |
| disabled: true |
| |
| - label: "Step 4: TH_CR3 Commissions with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR3 send the below command |
| |
| ./chip-tool pairing code 3 35484132896 --commissioner-name gamma |
| |
| Verify you got below message TH_CR3(chip-tool) log |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Step 5: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM and |
| TH_CR2 Commissions with DUT_CE" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| Verify Manual pairing code on TH1(chip-tool) Log |
| |
| 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| |
| On TH_CR2 send the below command |
| |
| ./chip-tool pairing code 2 35484132896 --commissioner-name beta |
| |
| Verify you got below message on TH_CR2(chip-tool) log |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Step 6: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635874557.417271][4549:4554] CHIP:IN: Sending encrypted msg 0xaaaac5947d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| disabled: true |
| |
| - label: |
| "Step 7: Before the expiration of PIXIT.CADMIN.CwDuration seconds |
| which was set in step 5, TH_CR1 opens a 2nd commissioning window on |
| DUT_CE using a commissioning timeout of PIXIT.CADMIN.CwDuration |
| seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| Verify that the DUT_CE is rejecting the opening of second commissioning session with the response status 0x01 failure |
| |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| Verify cluster status 1 on TH_CR1(chip-tool) Log |
| |
| |
| [1650527291.952431][8566:8571] CHIP:DMG: |
| [1650527291.952458][8566:8571] CHIP:DMG: StatusIB = |
| [1650527291.952488][8566:8571] CHIP:DMG: { |
| [1650527291.952519][8566:8571] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527291.952555][8566:8571] CHIP:DMG: cluster-status = 0x2, |
| [1650527291.952578][8566:8571] CHIP:DMG: }, |
| [1650527291.952612][8566:8571] CHIP:DMG: |
| [1650527291.952634][8566:8571] CHIP:DMG: }, |
| disabled: true |
| |
| - label: "Step 8: TH_CR1 reads the list of Fabrics on DUT_CE" |
| PICS: OPCREDS.S.A0001 |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool operationalcredentials read fabrics 1 0 --fabric-filtered 0 |
| |
| Verify the list of Fabrics consists of FabricIndex 1, FabricIndex 2, FabricIndex 3 on TH_CR1(chip-tool) log |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 268962768 |
| [1650527361.425870][15792:15797] CHIP:TOO: Fabrics: 3 entries |
| [1650527361.426777][15792:15797] CHIP:TOO: [1]: { |
| [1650527361.426859][15792:15797] CHIP:TOO: RootPublicKey: 0429A71383F336D80918C9EC655112513E428C073AF7FB44820EC793535302C6E3825C56EE6DD1A683EAA7B59E3F261B46FFA24A6D911E8D88839F4C1B3C84BA01 |
| [1650527361.426923][15792:15797] CHIP:TOO: VendorId: 65521 |
| [1650527361.426979][15792:15797] CHIP:TOO: FabricId: 1 |
| [1650527361.427033][15792:15797] CHIP:TOO: NodeId: 1 |
| [1650527361.427088][15792:15797] CHIP:TOO: Label: |
| [1650527361.427166][15792:15797] CHIP:TOO: FabricIndex: 1 |
| [1650527361.427376][15792:15797] CHIP:TOO: } |
| [1650527361.427464][15792:15797] CHIP:TOO: [2]: { |
| [1650527361.427532][15792:15797] CHIP:TOO: RootPublicKey: 04781BCEE70118049ED61DD5B4E401CF1A09D2F78AE7F5770BE5506AD24238E5E0777277DABAFD062659651C95CC2CA7DEAACE40DB579A946CC07CADB141BE05D7 |
| [1650527361.427595][15792:15797] CHIP:TOO: VendorId: 65521 |
| [1650527361.427649][15792:15797] CHIP:TOO: FabricId: 1 |
| [1650527361.427703][15792:15797] CHIP:TOO: NodeId: 3 |
| [1650527361.427756][15792:15797] CHIP:TOO: Label: |
| [1650527361.427811][15792:15797] CHIP:TOO: FabricIndex: 2 |
| [1650527361.427868][15792:15797] CHIP:TOO: } |
| [1650527361.427943][15792:15797] CHIP:TOO: [3]: { |
| [1650527361.428008][15792:15797] CHIP:TOO: RootPublicKey: 0403EDB5B461030A34EF7EA2F9DB0D46A36185E4755C365AF9344C4959F049EF21D55EAB903A2C7FBFC305EEFA42989250D7517A73E6156062390A60C0D4C41EBD |
| [1650527361.428067][15792:15797] CHIP:TOO: VendorId: 65521 |
| [1650527361.428122][15792:15797] CHIP:TOO: FabricId: 1 |
| [1650527361.428176][15792:15797] CHIP:TOO: NodeId: 2 |
| [1650527361.428229][15792:15797] CHIP:TOO: Label: |
| [1650527361.428282][15792:15797] CHIP:TOO: FabricIndex: 3 |
| [1650527361.428335][15792:15797] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 9: Wait for the expiration of PIXIT.CADMIN.CwDuration seconds |
| that was set in step 6" |
| verification: | |
| Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that was set in step 6 |
| disabled: true |
| |
| - label: |
| "Step 10: TH_CR1 re-opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| disabled: true |
| |
| - label: "Step 11: DNS-SD records shows DUT_CE advertising" |
| verification: | |
| On TH_CR1 send the below command |
| avahi-browse -rt _matterc._udp |
| + eth0 IPv6 2664ED6939FC373C _matterc._udp local |
| = eth0 IPv6 2664ED6939FC373C _matterc._udp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "SAI=300" "SII=5000" "VP=65521+32769"] |
| ubuntu@ubuntu:~/may16_cntrl/connectedhomeip/examples/chip-tool/out/debug$ |
| disabled: true |
| |
| - label: |
| "Step 12: Before the expiration of PIXIT.CADMIN.CwDuration seconds |
| that was set in step 10, TH_CR3 opens a 2nd commissioning window on |
| DUT_CE using a commissioning timeout of PIXIT.CADMIN.CwDuration |
| seconds using BCM" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| On TH_CR3 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 3 0 --timedInteractionTimeoutMs 1000 --commissioner-name gamma |
| |
| Verify that the DUT_CE is rejecting the opening of second commissioning session with the response status 0x01 failure |
| |
| |
| |
| [1650527565.991042][24618:24623] CHIP:DMG: { |
| [1650527565.991112][24618:24623] CHIP:DMG: EndpointId = 0x0, |
| [1650527565.991186][24618:24623] CHIP:DMG: ClusterId = 0x3c, |
| [1650527565.991257][24618:24623] CHIP:DMG: CommandId = 0x1, |
| [1650527565.991332][24618:24623] CHIP:DMG: }, |
| [1650527565.991441][24618:24623] CHIP:DMG: |
| [1650527565.991505][24618:24623] CHIP:DMG: StatusIB = |
| [1650527565.991574][24618:24623] CHIP:DMG: { |
| [1650527565.991645][24618:24623] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527565.991743][24618:24623] CHIP:DMG: cluster-status = 0x2, |
| [1650527565.991830][24618:24623] CHIP:DMG: }, |
| [1650527565.991918][24618:24623] CHIP:DMG: |
| [1650527565.991976][24618:24623] CHIP:DMG: }, |
| [1650527565.992061][24618:24623] CHIP:DMG: |
| [1650527565.992116][24618:24623] CHIP:DMG: }, |
| disabled: true |
| |
| - label: |
| "Step 13: Wait for the expiration of PIXIT.CADMIN.CwDuration seconds |
| that was set in step 11" |
| verification: | |
| Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that was set in step 10 |
| disabled: true |
| |
| - label: "Step 14: TH_CR1 reads the list of Fabrics on DUT_CE" |
| PICS: OPCREDS.S.A0001 |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool operationalcredentials read fabrics 1 0 --fabric-filtered 0 |
| |
| Verify the list of Fabrics consists of FabricIndex 1, FabricIndex 2, FabricIndex 3 on TH_CR1(chip-tool) log |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Attribute 0x0000_0001 DataVersion: 268962768 |
| [1678866402.096093][704851:704853] CHIP:TOO: Fabrics: 3 entries |
| [1678866402.096119][704851:704853] CHIP:TOO: [1]: { |
| [1678866402.096131][704851:704853] CHIP:TOO: RootPublicKey: 045F808373B5CED7FC2AFF99D98C2DEE6CA3889A9B078E87DAD9E263C9DEDB47AD7D31703024B72F4CB68A3017963128748FC7E97C6CBB419AF8AA914CE67D7457 |
| [1678866402.096141][704851:704853] CHIP:TOO: VendorID: 65521 |
| [1678866402.096147][704851:704853] CHIP:TOO: FabricID: 1 |
| [1678866402.096154][704851:704853] CHIP:TOO: NodeID: 1 |
| [1678866402.096160][704851:704853] CHIP:TOO: Label: |
| [1678866402.096167][704851:704853] CHIP:TOO: FabricIndex: 1 |
| [1678866402.096173][704851:704853] CHIP:TOO: } |
| [1678866402.096185][704851:704853] CHIP:TOO: [2]: { |
| [1678866402.096194][704851:704853] CHIP:TOO: RootPublicKey: 0458F2B4AD99F579EC01AA271EFDDF14526CE5222BADE218C703902544430F32FA9B951963C6C03713AC63E2D95785CFCD997946098957C4F5844BD2B3916B7148 |
| [1678866402.096201][704851:704853] CHIP:TOO: VendorID: 65521 |
| [1678866402.096207][704851:704853] CHIP:TOO: FabricID: 3 |
| [1678866402.096213][704851:704853] CHIP:TOO: NodeID: 3 |
| [1678866402.096219][704851:704853] CHIP:TOO: Label: |
| [1678866402.096224][704851:704853] CHIP:TOO: FabricIndex: 2 |
| [1678866402.096230][704851:704853] CHIP:TOO: } |
| [1678866402.096241][704851:704853] CHIP:TOO: [3]: { |
| [1678866402.096250][704851:704853] CHIP:TOO: RootPublicKey: 04CE10BA136D610089C4810BF963C354CE93BA61D267E8B9594977E3CC5FF30741941CE3D2A0A9E62A66AEF02CAA9F25A614F033D304D9F2ACF4204FAB68E8F773 |
| [1678866402.096257][704851:704853] CHIP:TOO: VendorID: 65521 |
| [1678866402.096263][704851:704853] CHIP:TOO: FabricID: 2 |
| [1678866402.096269][704851:704853] CHIP:TOO: NodeID: 2 |
| [1678866402.096274][704851:704853] CHIP:TOO: Label: |
| [1678866402.096280][704851:704853] CHIP:TOO: FabricIndex: 3 |
| [1678866402.096286][704851:704853] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 15: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify success response On TH_CR1(chip-tool) Log |
| |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| disabled: true |
| |
| - label: |
| "Step 16: Before the expiration of PIXIT.CADMIN.CwDuration seconds |
| that was set in step 14, TH_CR2 opens a second commissioning window on |
| DUT_CE using a commissioning timeout of PIXIT.CADMIN.CwDuration |
| seconds using BCM" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| On TH_CR2 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta |
| |
| |
| Verify that the DUT_CE is rejecting the opening of second commissioning session with the response status 0x01 failure |
| |
| |
| |
| [1650527622.374682][15824:15829] CHIP:DMG: }, |
| [1650527622.374799][15824:15829] CHIP:DMG: |
| [1650527622.374896][15824:15829] CHIP:DMG: StatusIB = |
| [1650527622.374979][15824:15829] CHIP:DMG: { |
| [1650527622.375086][15824:15829] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527622.375236][15824:15829] CHIP:DMG: cluster-status = 0x2, |
| [1650527622.375320][15824:15829] CHIP:DMG: }, |
| [1650527622.375426][15824:15829] CHIP:DMG: |
| [1650527622.375527][15824:15829] CHIP:DMG: }, |
| [1650527622.375616][15824:15829] CHIP:DMG: |
| disabled: true |
