| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 24.1.5. [TC-CADMIN-1.5] Commissioning window handling timeout and revocation |
| using ECM [DUT_CE - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| |
| config: |
| nodeId: 0x12344321 |
| timeout: 300 |
| nodeIdForDuplicateCommissioning: |
| type: node_id |
| defaultValue: 0x11 |
| nodeId2: |
| type: node_id |
| defaultValue: 0xCAFE |
| nodeId3: |
| type: node_id |
| defaultValue: 0xC00FEE |
| endpoint: 0 |
| waitAfterCommissioning: |
| type: int16u |
| defaultValue: 5000 |
| discriminator: |
| type: int16u |
| defaultValue: 3840 |
| payload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00KA0648G00" # This value needs to be generated automatically |
| PakeVerifier: |
| type: octet_string |
| defaultValue: "hex:b96170aae803346884724fe9a3b287c30330c2a660375d17bb205a8cf1aecb350457f8ab79ee253ab6a8e46bb09e543ae422736de501e3db37d441fe344920d09548e4c18240630c4ff4913c53513839b7c07fcc0627a1b8573a149fcd1fa466cf" |
| IncorrectPakeVerifier: |
| type: octet_string |
| defaultValue: "hex:06c756dffcd722653452a12dcd945d8c54da2b0f3cbd1b4dc3f1adb223aeb26b047cd24c96866f979b1d83ec50e2b4ae30cdf2fdb32bd8a211b837dc94edcd56f4d14377191076bfc59d99b7dd3053efd6f02c4434f2bdd27a" |
| PIXIT.CADMIN.CwDuration: |
| type: int16u |
| defaultValue: 180 |
| |
| tests: |
| - label: "Precondition: Reset Devices to factory defaults" |
| PICS: PICS_SDK_CI_ONLY |
| cluster: "SystemCommands" |
| command: "FactoryReset" |
| |
| - label: "Precondition: Reset Devices to factory defaults" |
| verification: | |
| Reset Devices to factory defaults |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP |
| arguments: |
| values: |
| - name: "message" |
| value: "Factory Reset the DUT and enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 1a: TH_CR1 starts a commissioning process with DUT_CE" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| - name: "payload" |
| value: payload |
| |
| - label: "Step 1b: TH_CR1 commissioned with DUT_CE" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: |
| "Step 2: TH_CR1 opens a new commissioning window on DUT_CE using ECM" |
| cluster: "Administrator Commissioning" |
| command: "OpenCommissioningWindow" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: PIXIT.CADMIN.CwDuration |
| - name: "PAKEPasscodeVerifier" |
| value: PakeVerifier |
| - name: "Discriminator" |
| value: discriminator |
| - name: "Iterations" |
| value: 1000 |
| - name: "Salt" |
| value: "SPAKE2P Key Salt" |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: |
| "Step 2: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 PIXIT.CADMIN.CwDuration 1000 3841 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 3: DNS-SD records shows DUT_CE advertising. Verify that the |
| DNS-SD advertisement shows CM=2" |
| PICS: CADMIN.S.C00.Rsp |
| cluster: "DiscoveryCommands" |
| command: "FindCommissionable" |
| response: |
| values: |
| - name: "commissioningMode" |
| value: 2 |
| |
| - label: "Step 4a: Wait for PIXIT.CADMIN.CwDuration + 10 seconds" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: ( PIXIT.CADMIN.CwDuration + 10 ) * 1000 |
| |
| - label: "Step 4b: TH_CR2 starts a commissioning process with DUT_CE" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: payload |
| response: |
| error: FAILURE |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: "Step 4b: TH_CR2 starts a commissioning process with DUT_CE" |
| verification: | |
| On TH_CR2 send the below command |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| |
| ./chip-tool pairing code 0xCAFE 36177160937 --commissioner-name beta |
| |
| Verify the below message in the TH_CR2(chip-tool) Log: |
| |
| [1663841939.843550][13897:13897] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0) |
| [1663841939.843617][13897:13897] CHIP:DL: Inet Layer shutdown |
| [1663841939.843673][13897:13897] CHIP:DL: BLE shutdown |
| [1663841939.843727][13897:13897] CHIP:DL: System Layer shutdown |
| [1663841939.844009][13897:13897] CHIP:TOO: Run command failure: ../../examples/chip-tool/commands/pairing/PairingCommand.cpp:151: CHIP Error 0x00000003: Incorrect state |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Ste 5: TH_CR1 opens a new commissioning window on DUT_CE using ECM" |
| cluster: "Administrator Commissioning" |
| command: "OpenCommissioningWindow" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: PIXIT.CADMIN.CwDuration |
| - name: "PAKEPasscodeVerifier" |
| value: PakeVerifier |
| - name: "Discriminator" |
| value: discriminator |
| - name: "Iterations" |
| value: 1000 |
| - name: "Salt" |
| value: "SPAKE2P Key Salt" |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: |
| "Step 5: TH_CR1 opens a new commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 PIXIT.CADMIN.CwDuration 2000 3840 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type 0x10 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Waiting after opening commissioning window" |
| PICS: PICS_SDK_CI_ONLY && CADMIN.S.C00.Rsp |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: waitAfterCommissioning |
| |
| - label: "Step 6: TH_CR1 revokes the commissioning window on DUT_CE" |
| cluster: "Administrator Commissioning" |
| command: "RevokeCommissioning" |
| PICS: CADMIN.S.C02.Rsp |
| timedInteractionTimeoutMs: 10000 |
| |
| - label: "Step 7: TH_CR2 starts a commissioning process with DUT_CE" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S && PICS_SDK_CI_ONLY |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: payload |
| response: |
| error: FAILURE |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: "Step 7: TH_CR2 starts a commissioning process with DUT_CE" |
| verification: | |
| On TH_CR2 send the below command |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| |
| ./chip-tool pairing code 0xCAFE 36177160937 --commissioner-name beta |
| |
| Verify the below message in the TH_CR2(chip-tool) Log: |
| |
| Device commissioning completed with successoning step 'Cleanup' |
| [1657186359.584743][3509:3514] CHIP:TOO: Device commissioning completed with success |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 8: TH_CR1 revokes the commissioning window on DUT_CE" |
| cluster: "Administrator Commissioning" |
| command: "RevokeCommissioning" |
| PICS: CADMIN.S.C02.Rsp |
| timedInteractionTimeoutMs: 10000 |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 9a: TH_CR1 writes the mandatory attribute NodeLabel of DUT_CE" |
| cluster: "Basic Information" |
| command: "writeAttribute" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| arguments: |
| value: "chiptest" |
| |
| - label: "Step 9b: TH_CR1 read the mandatory attribute NodeLabel of DUT_CE" |
| cluster: "Basic Information" |
| command: "readAttribute" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| response: |
| value: "chiptest" |
| |
| - label: |
| "Step 10: TH_CR1 opens a new commissioning window on DUT_CE using |
| wrong PakeVerifier value using ECM" |
| cluster: "Administrator Commissioning" |
| command: "OpenCommissioningWindow" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: PIXIT.CADMIN.CwDuration |
| - name: "PAKEPasscodeVerifier" |
| value: IncorrectPakeVerifier |
| - name: "Discriminator" |
| value: discriminator |
| - name: "Iterations" |
| value: 1000 |
| - name: "Salt" |
| value: "SPAKE2P Key Salt" |
| response: |
| error: FAILURE |
| clusterError: 3 |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: |
| "Step 10: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| verification: | |
| On TH_CR1 send the below command |
| Below is example command by considering the "\x06\xc7\x56\xdf\xfc\xd7\x22\x65\x34\x52\xa1\x2d\xcd\x94\x5d\x8c\x54\xda\x2b\x0f\x3c\xbd\x1b\x4d\xc3\xf1\xad\xb2\x23\xae\xb2\x6b\x04\x7c\xd2\x4c\x96\x86\x6f\x97\x9b\x1d\x83\xec\x50\xe2\xb4\xae\x30\xcd\xf2\xfd\xb3\x2b\xd8\xa2\x11\xb8\x37\xdc\x94\xed\xcd\x56\xf4\xd1\x43\x77\x19\x10\x76\xbf\xc5\x9d\x99\xb7\xdd\x30\x53\xef\xd6\xf0\x2c\x44\x34\xf2\xbd " as a wrong PakeVerifier value |
| |
| |
| ./chip-tool administratorcommissioning open-commissioning-window PIXIT.CADMIN.CwDuration \x06\xc7\x56\xdf\xfc\xd7\x22\x65\x34\x52\xa1\x2d\xcd\x94\x5d\x8c\x54\xda\x2b\x0f\x3c\xbd\x1b\x4d\xc3\xf1\xad\xb2\x23\xae\xb2\x6b\x04\x7c\xd2\x4c\x96\x86\x6f\x97\x9b\x1d\x83\xec\x50\xe2\xb4\xae\x30\xcd\xf2\xfd\xb3\x2b\xd8\xa2\x11\xb8\x37\xdc\x94\xed\xcd\x56\xf4\xd1\x43\x77\x19\x10\x76\xbf\xc5\x9d\x99\xb7\xdd\x30\x53\xef\xd6\xf0\x2c\x44\x34\xf2\xbd 3841 1000 16 0x12344321 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the status on the TH_CR1(chip-tool) Log: |
| |
| [1656434435.691038][3836:3842] CHIP:DMG: { |
| [1656434435.691119][3836:3842] CHIP:DMG: EndpointId = 0x0, |
| [1656434435.691287][3836:3842] CHIP:DMG: ClusterId = 0x3c, |
| [1656434435.691377][3836:3842] CHIP:DMG: CommandId = 0x0, |
| [1656434435.691456][3836:3842] CHIP:DMG: }, |
| [1656434435.691548][3836:3842] CHIP:DMG: |
| [1656434435.691620][3836:3842] CHIP:DMG: StatusIB = |
| [1656434435.691707][3836:3842] CHIP:DMG: { |
| [1656434435.691788][3836:3842] CHIP:DMG: status = 0x01 (FAILURE), |
| [1656434435.691874][3836:3842] CHIP:DMG: cluster-status = 0x3, |
| [1656434435.691954][3836:3842] CHIP:DMG: }, |
| [1656434435.692041][3836:3842] CHIP:DMG: |
| [1656434435.692112][3836:3842] CHIP:DMG: }, |
| [1656434435.692191][3836:3842] CHIP:DMG: |
| [1656434435.692257][3836:3842] CHIP:DMG: }, |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 11: TH_CR1 opens a new commissioning window on DUT_CE using ECM" |
| cluster: "Administrator Commissioning" |
| command: "OpenCommissioningWindow" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: PIXIT.CADMIN.CwDuration |
| - name: "PAKEPasscodeVerifier" |
| value: PakeVerifier |
| - name: "Discriminator" |
| value: discriminator |
| - name: "Iterations" |
| value: 1000 |
| - name: "Salt" |
| value: "SPAKE2P Key Salt" |
| |
| - label: "Waiting after opening commissioning window" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: waitAfterCommissioning |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: |
| "Step 11: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 PIXIT.CADMIN.CwDuration 1000 3841 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 12: TH_CR1 opens another commissioning window on DUT_CE using |
| ECM" |
| cluster: "Administrator Commissioning" |
| command: "OpenCommissioningWindow" |
| PICS: CADMIN.S.C00.Rsp && PICS_SDK_CI_ONLY |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: PIXIT.CADMIN.CwDuration |
| - name: "PAKEPasscodeVerifier" |
| value: PakeVerifier |
| - name: "Discriminator" |
| value: discriminator |
| - name: "Iterations" |
| value: 1000 |
| - name: "Salt" |
| value: "SPAKE2P Key Salt" |
| response: |
| error: FAILURE |
| clusterError: 2 |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: |
| "Step 13: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3840 |
| |
| Verify that the DUT_CE is rejecting the opening of second commissioning session with the response status 0x01 failure |
| |
| [1656405166.756822][5933:5938] CHIP:DMG: { |
| [1656405166.756927][5933:5938] CHIP:DMG: EndpointId = 0x0, |
| [1656405166.757033][5933:5938] CHIP:DMG: ClusterId = 0x3c, |
| [1656405166.757120][5933:5938] CHIP:DMG: CommandId = 0x0, |
| [1656405166.757222][5933:5938] CHIP:DMG: }, |
| [1656405166.757333][5933:5938] CHIP:DMG: |
| [1656405166.757452][5933:5938] CHIP:DMG: StatusIB = |
| [1656405166.757557][5933:5938] CHIP:DMG: { |
| [1656405166.757641][5933:5938] CHIP:DMG: status = 0x01 (FAILURE), |
| [1656405166.757745][5933:5938] CHIP:DMG: cluster-status = 0x2, |
| [1656405166.757846][5933:5938] CHIP:DMG: }, |
| [1656405166.757929][5933:5938] CHIP:DMG: |
| [1656405166.758014][5933:5938] CHIP:DMG: }, |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 13a: TH_CR2 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S && PICS_SDK_CI_ONLY |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: payload |
| |
| - label: "Step 13b: DUT_CE is commissioned by TH_CR2" |
| identity: "beta" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S && PICS_SDK_CI_ONLY |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: "Step 13: TH_CR2 starts a commissioning process with DUT_CE" |
| verification: | |
| On TH_CR2 send the below command |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| |
| ./chip-tool pairing code 0xCAFE 36177160937 --commissioner-name beta |
| |
| Verify the below message in the TH_CR2(chip-tool) Log: |
| Device commissioning completed with success |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH2 reads CurrentFabricIndex attribute and save it for future use." |
| identity: "beta" |
| command: "readAttribute" |
| cluster: "Operational Credentials" |
| attribute: "CurrentFabricIndex" |
| response: |
| saveAs: TH2FabricIndex |
| |
| - label: |
| "Step 14: TH_CR1 tries to revoke the commissioning window on DUT_CE |
| using RevokeCommissioning command" |
| cluster: "Administrator Commissioning" |
| command: "RevokeCommissioning" |
| PICS: CADMIN.S.C02.Rsp |
| timedInteractionTimeoutMs: 10000 |
| response: |
| error: FAILURE |
| clusterError: 4 |
| |
| - label: "Step 15: TH_CR3 starts a commissioning process with DUT_CE" |
| identity: "gamma" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S && PICS_SDK_CI_ONLY |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId3 |
| - name: "payload" |
| value: payload |
| response: |
| error: FAILURE |
| |
| #Issue https://github.com/project-chip/connectedhomeip/issues/26127 |
| - label: "Step 15: TH_CR2 starts a commissioning process with DUT_CE" |
| verification: | |
| On TH_CR2 send the below command |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| |
| ./chip-tool pairing code 0xCAFE 36177160937 --commissioner-name beta |
| |
| verify you got the following message in the TH_CR3(chip-tool) log |
| CHIP:SC: PASESession timed out while waiting for a response from the peer. Expected message type was 33 |
| CHIP:TOO: Secure Pairing Failed |
| CHIP:TOO: Pairing Failure: ../../third_party/connectedhomeip/src/protocols/secure_channel/PASESession.cpp:324: CHIP Error 0x00000032: Timeout |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP && CADMIN.S.C00.Rsp |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Remove TH2 FabricIndex" |
| PICS: OPCREDS.S.C0a.Rsp && CADMIN.S |
| identity: "beta" |
| cluster: "Operational Credentials" |
| command: "RemoveFabric" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "FabricIndex" |
| value: TH2FabricIndex |
