src/app/tests/suites/certification/Test_TC_DD_1_5.yaml

# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default

name:
    3.1.5. [TC-DD-1.5] NFC Rules of Advertisement and Onboarding [DUT -
    Commissionee]

PICS:
    - MCORE.ROLE.COMMISSIONEE
    - MCORE.DD.NFC

config:
    nodeId: 0x12344321
    cluster: "Basic Information"
    endpoint: 0

tests:
    - label: "Preconditions"
      verification: |
          1 - 5.1.7 - NFC Spec Requirements: NFC tags SHALL use the NFC Data Exchange Format (NDEF) as defined by NFC ForumTM in [NDEF 1.0 NFCForum-TS-NDEF 1.0]

          An NDEF message is defined as a group of individual NDEF records as defined by NFC ForumTM in NFC Record Type Definition (RTD) RTD 1.0 [NFCForum-TS-RTD 1.0]

          Onboarding Payload for NFC tags SHALL use NDEF URI Record Type Definition as defined by NFC ForumTM in URI Record Type Definition RTD-URI 1.0 [NFCForum-TS-RTD URI 1.0]. The URI for defined in section 3.3 Format
      disabled: true

    - label:
          "Step 1: Keep the DUT in packaging and bring in TH NFC scanner close
          to the DUT packaging."
      verification: |
          1. Using an NFC Scanner, physically bring the scanner close to the DUT in it's packaging.
          2. NFC Scanner should not be able to read the Onboarding Payload from the DUT's NFC tag.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 2a: Unpack DUT from its packaging, make sure DUT is not powered
          on and do not put the DUT in pairing mode. Bring in TH NFC scanner
          close to the DUTs NFC tag"
      verification: |
          1. Using an NFC Scanner, physically bring the scanner close to the DUT that is out of it's packaging.
          2. NFC Scanner should not be able to read the Onboarding Payload from the DUT's NFC tag.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 2b: Power on DUT and do not put the DUT in pairing mode. Bring
          in TH NFC scanner close to the DUTs NFC tag"
      PICS: MCORE.DD.PHYSICAL_TAMPERING
      verification: |
          1. Power on the DUT.
          2. Using an NFC Scanner, physically bring the scanner close to the DUT.
          3. NFC Scanner should not be able to read the Onboarding Payload from the DUT's NFC tag.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 2c: DUT must have an explicit trigger of the the NFC pairing
          mode"
      PICS: MCORE.DD.PHYSICAL_TAMPERING
      verification: |
          1. Manually verify that the DUT has an explicit trigger (a physical action that enables the NFC pairing flow).

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 2d: Power on DUT and put the DUT in pairing mode. Bring in TH
          NFC scanner close to NFC tag"
      PICS: MCORE.DD.PHYSICAL_TAMPERING
      verification: |
          1. Power on the DUT.
          2. Put the DUT into pairing mode.
          2. Using an NFC Scanner, physically bring the scanner close to the DUT
          3. NFC Scanner should be able to read the Onboarding Payload from the DUT's NFC tag.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label: "Step 2e: Power on DUT. Bring in NFC scanner close to NFC tag"
      PICS: MCORE.DD.PHYSICAL_TAMPERING
      verification: |
          1. Power on the DUT.
          2. Using an NFC Scanner, physically bring the scanner close to the DUT.
          3. NFC Scanner should be able to read the Onboarding Payload from the DUT's NFC tag.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label: "Step 2f: Wait for the pairing mode to expire on device"
      verification: |
          1. After pairing mode expires on the DUT, verify that the NFC Scanner cannot read advertisements from the DUT.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 3: For Read only Tags, try to write using NFC tool a payload to
          DUT"
      verification: |
          1. Using an NFC-programmer tool, attempt to write a payload to the DUT's NFC tag
          2. DUT should reject the attempt and the NFC tag should not have been written to.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 4a: For Programmable Tag, NFC tag must be read only OTA. Try to
          write a payload to DUT using NFC tool"
      verification: |
          1. Using an NFC-programmer tool, attempt to write a payload to the DUT's NFC tag
          2. DUT should reject the attempt and the NFC tag should not have been written to.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label:
          "Step 4b: Optional  For Programmable Tag, NFC tag may be reconfigured
          using wired means"
      verification: |
          1. This is vendor-specific, attempt to write a payload to the DUT's NFC tag by way of a physical wired connection.
          2. DUT's NFC tag should have been written to.

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true

    - label: "Step 5: Using TH NFC scanner - read NFC tag Reader type"
      verification: |
          1. Using an NFC Scanner, physically bring the scanner close to the DUT
          2. DUT's NFC tag should have a Reader type equal to 2 or greater

          Note: chip-tool does not support physically scanning an NFC tag
      disabled: true