| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 263.3.1. [TC-DISHM-2.1] Change to Mode functionality with DUT as Server |
| |
| PICS: |
| - DISHM.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: |
| "Step 1: Commission DUT to TH (can be skipped if done in a preceding |
| test)." |
| verification: | |
| |
| disabled: true |
| |
| - label: "Step 2: TH reads from the DUT the SupportedModes attribute." |
| PICS: DISHM.S.A0000 |
| verification: | |
| ./chip-tool dishwashermode read supported-modes 1 1 |
| |
| Verify that the DUT response contains list of ModeOptionsStruct entries |
| - Verify that the list has two or more entries |
| - Verify that PIXIT.DISHM.MODE_CHANGE_FAIL is one of supported_modes_dut |
| - Save the Mode field values as supported_modes_dut on the TH (Chip-tool) and below is the sample log provided for the raspi platform: |
| |
| [1689998005.121163][360287:360289] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0000 DataVersion: 1994417976 |
| [1689998005.121241][360287:360289] CHIP:TOO: SupportedModes: 3 entries |
| [1689998005.121250][360287:360289] CHIP:TOO: [1]: { |
| [1689998005.121256][360287:360289] CHIP:TOO: Label: Normal |
| [1689998005.121261][360287:360289] CHIP:TOO: Mode: 0 |
| [1689998005.121264][360287:360289] CHIP:TOO: ModeTags: 1 entries |
| [1689998005.121268][360287:360289] CHIP:TOO: [1]: { |
| [1689998005.121270][360287:360289] CHIP:TOO: Value: 16384 |
| [1689998005.121272][360287:360289] CHIP:TOO: } |
| [1689998005.121274][360287:360289] CHIP:TOO: } |
| [1689998005.121278][360287:360289] CHIP:TOO: [2]: { |
| [1689998005.121279][360287:360289] CHIP:TOO: Label: Heavy |
| [1689998005.121280][360287:360289] CHIP:TOO: Mode: 1 |
| [1689998005.121283][360287:360289] CHIP:TOO: ModeTags: 2 entries |
| [1689998005.121285][360287:360289] CHIP:TOO: [1]: { |
| [1689998005.121287][360287:360289] CHIP:TOO: Value: 7 |
| [1689998005.121288][360287:360289] CHIP:TOO: } |
| [1689998005.121291][360287:360289] CHIP:TOO: [2]: { |
| [1689998005.121292][360287:360289] CHIP:TOO: Value: 16385 |
| [1689998005.121293][360287:360289] CHIP:TOO: } |
| [1689998005.121295][360287:360289] CHIP:TOO: } |
| [1689998005.121299][360287:360289] CHIP:TOO: [3]: { |
| [1689998005.121300][360287:360289] CHIP:TOO: Label: Light |
| [1689998005.121302][360287:360289] CHIP:TOO: Mode: 2 |
| [1689998005.121305][360287:360289] CHIP:TOO: ModeTags: 3 entries |
| [1689998005.121307][360287:360289] CHIP:TOO: [1]: { |
| [1689998005.121309][360287:360289] CHIP:TOO: Value: 16386 |
| [1689998005.121310][360287:360289] CHIP:TOO: } |
| [1689998005.121312][360287:360289] CHIP:TOO: [2]: { |
| [1689998005.121314][360287:360289] CHIP:TOO: Value: 8 |
| [1689998005.121315][360287:360289] CHIP:TOO: } |
| [1689998005.121317][360287:360289] CHIP:TOO: [3]: { |
| [1689998005.121319][360287:360289] CHIP:TOO: Value: 2 |
| [1689998005.121320][360287:360289] CHIP:TOO: } |
| [1689998005.121321][360287:360289] CHIP:TOO: } |
| disabled: true |
| |
| - label: "Step 3: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer value, |
| - Save the value as old_current_mode_dut |
| - Select a value which is NOT in supported_modes_dut and save it as invalid_mode_th, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0 |
| |
| [1685018283.726667][16418:16420] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0003 DataVersion: 3898153349 |
| [1685018283.726680][16418:16420] CHIP:TOO: CurrentMode: 0 |
| disabled: true |
| |
| - label: |
| "Step 4: TH sends a ChangeToMode command to the DUT with NewMode set |
| to old_current_mode_dut" |
| PICS: DISHM.S.C00.Rsp |
| verification: | |
| ./chip-tool dishwashermode change-to-mode 0 1 1 |
| |
| Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a SUCCESS (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1690185977.976163][15730:15732] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001 |
| [1690185977.976178][15730:15732] CHIP:TOO: ChangeToModeResponse: { |
| [1690185977.976182][15730:15732] CHIP:TOO: status: 0 |
| [1690185977.976185][15730:15732] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 5: Manually put the device in a state from which it will FAIL to |
| transition to PIXIT.DISHM.MODE_CHANGE_FAIL" |
| PICS: DISHM.S.M.CAN_TEST_MODE_FAILURE && DISHM.S.M.CAN_MANUALLY_CONTROLLED |
| verification: | |
| Manual operation required |
| disabled: true |
| |
| - label: "Step 6: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 && DISHM.S.M.CAN_MANUALLY_CONTROLLED |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer value, |
| - Save the value as old_current_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0 |
| |
| [1685018283.726667][16418:16420] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0003 DataVersion: 3898153349 |
| [1685018283.726680][16418:16420] CHIP:TOO: CurrentMode: 0 |
| disabled: true |
| |
| - label: |
| "Step 7: TH sends a ChangeToMode command to the DUT with NewMode set |
| to PIXIT.DISHM.MODE_CHANGE_FAIL" |
| PICS: DISHM.S.M.CAN_TEST_MODE_FAILURE && DISHM.S.C00.Rsp |
| verification: | |
| Note : Please skip this step as SDK is not enabled with this failure response |
| |
| ./chip-tool dishwashermode change-to-mode 2 1 1 |
| |
| Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with |
| Status field is set to GenericFailure(0x02), InvalidInMode(0x03) , or in the MfgCodes (0x80 to 0xBF) range and StatusText field has a length between 1 and 64, below is the sample log provided for the raspi platform: |
| |
| [1690264785.719168][29854:29856] CHIP:DMG: Received Command Response Data, Endpoint=1 Cluster=0x0000_0059 Command=0x0000_0001 |
| [1690264785.719200][29854:29856] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001 |
| [1690264785.719263][29854:29856] CHIP:TOO: ChangeToModeResponse: { |
| [1690264785.719283][29854:29856] CHIP:TOO: status: 0 |
| [1690264785.719297][29854:29856] CHIP:TOO: } |
| disabled: true |
| |
| - label: "Step 8: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| Verify on TH(chip-tool), CurrentMode attribute value is an integer value and equal to old_current_mode_dut below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0 |
| |
| [1690186182.071331][15758:15760] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242726 |
| [1690186182.071346][15758:15760] CHIP:TOO: CurrentMode: 0 |
| disabled: true |
| |
| - label: |
| "Step 9: Manually put the device in a state from which it will |
| SUCCESSFULLY transition to PIXIT.DISHM.MODE_CHANGE_OK" |
| PICS: DISHM.S.M.CAN_MANUALLY_CONTROLLED |
| verification: | |
| Manual operation required |
| disabled: true |
| |
| - label: "Step 10: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 && DISHM.S.M.CAN_MANUALLY_CONTROLLED |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer value, |
| - Save the value as old_current_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 0 |
| |
| [1690186182.071331][15758:15760] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242726 |
| [1690186182.071346][15758:15760] CHIP:TOO: CurrentMode: 0 |
| disabled: true |
| |
| - label: |
| "Step 11: TH sends a ChangeToMode command to the DUT with NewMode set |
| to PIXIT.DISHM.MODE_CHANGE_OK" |
| PICS: DISHM.S.C00.Rsp |
| verification: | |
| ./chip-tool dishwashermode change-to-mode 2 1 1 |
| |
| Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a SUCCESS (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1690187929.904831][15897:15899] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001 |
| [1690187929.904845][15897:15899] CHIP:TOO: ChangeToModeResponse: { |
| [1690187929.904852][15897:15899] CHIP:TOO: status: 0 |
| [1690187929.904855][15897:15899] CHIP:TOO: } |
| disabled: true |
| |
| - label: "Step 12: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer value and same as step 11, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 2 |
| |
| [1690187960.116433][15901:15903] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242727 |
| [1690187960.116478][15901:15903] CHIP:TOO: CurrentMode: 2 |
| disabled: true |
| |
| - label: |
| "Step 13: TH sends a ChangeToMode command to the DUT with NewMode set |
| to invalid_mode_th" |
| PICS: DISHM.S.C00.Rsp |
| verification: | |
| ./chip-tool dishwashermode change-to-mode 4 1 1 |
| |
| Verify on TH(chip-tool) log, DUT responds contains a ChangeToModeResponse command with a UnsupportedMode(0x01) status response and below is the sample log provided for the raspi platform: |
| |
| [1690188004.105157][15906:15908] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Command 0x0000_0001 |
| [1690188004.105172][15906:15908] CHIP:TOO: ChangeToModeResponse: { |
| [1690188004.105178][15906:15908] CHIP:TOO: status: 1 |
| [1690188004.105181][15906:15908] CHIP:TOO: } |
| disabled: true |
| |
| - label: "Step 14: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| Verify on TH(chip-tool) logs, CurrentMode attribute value is an integer value and same as step 12, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 2 |
| |
| [1690187960.116433][15901:15903] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 74242727 |
| [1690187960.116478][15901:15903] CHIP:TOO: CurrentMode: 2 |
| disabled: true |
