| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 116.2.1. [TC-DRLK-2.1] Attributes check [DUT - Server] |
| |
| PICS: |
| - DRLK.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Door Lock" |
| endpoint: 1 |
| |
| WaitAfterLockAandUnlockDoor: |
| type: int16u |
| defaultValue: 5000 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Precondition: Create new user" |
| PICS: DRLK.S.F00 && DRLK.S.F07 |
| command: "SetUser" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "OperationType" |
| value: 0 |
| - name: "UserIndex" |
| value: 1 |
| - name: "UserName" |
| value: "xxx" |
| - name: "UserUniqueID" |
| value: 6452 |
| - name: "UserStatus" |
| value: 1 |
| - name: "UserType" |
| value: 0 |
| - name: "CredentialRule" |
| value: 0 |
| |
| - label: "Precondition: Read the user back and verify its fields" |
| PICS: DRLK.S.F00 && DRLK.S.F07 |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "UserIndex" |
| value: 1 |
| response: |
| values: |
| - name: "UserIndex" |
| value: 1 |
| - name: "UserName" |
| value: "xxx" |
| - name: "UserUniqueID" |
| value: 6452 |
| - name: "UserStatus" |
| value: 1 |
| - name: "UserType" |
| value: 0 |
| - name: "CredentialRule" |
| value: 0 |
| - name: "Credentials" |
| value: [] |
| - name: "CreatorFabricIndex" |
| value: 1 |
| - name: "LastModifiedFabricIndex" |
| value: 1 |
| - name: "NextUserIndex" |
| value: null |
| |
| - label: "Precondition: Create new PIN credential and lock/unlock user" |
| PICS: DRLK.S.F00 && DRLK.S.F07 |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "OperationType" |
| value: 0 |
| - name: "Credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "CredentialData" |
| value: "123456" |
| - name: "UserIndex" |
| value: 1 |
| - name: "UserStatus" |
| value: null |
| - name: "UserType" |
| value: null |
| response: |
| values: |
| - name: "Status" |
| value: 0 |
| - name: "UserIndex" |
| value: null |
| - name: "NextCredentialIndex" |
| value: 2 |
| |
| - label: "Precondition: Verify created PIN credential" |
| PICS: DRLK.S.F00 && DRLK.S.F07 |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "Credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "CredentialExists" |
| value: true |
| - name: "UserIndex" |
| value: 1 |
| - name: "CreatorFabricIndex" |
| value: 1 |
| - name: "LastModifiedFabricIndex" |
| value: 1 |
| - name: "NextCredentialIndex" |
| value: null |
| |
| - label: "Step 1a: TH reads LockState attribute from DUT" |
| PICS: DRLK.S.A0000 |
| command: "readAttribute" |
| attribute: "LockState" |
| response: |
| saveAs: LockStateValue |
| constraints: |
| type: enum8 |
| minValue: 0 |
| maxValue: 3 |
| |
| - label: "Step 1b: TH writes LockState attribute as 1" |
| PICS: DRLK.S.A0000 |
| command: "writeAttribute" |
| attribute: "LockState" |
| arguments: |
| value: 1 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 1c: TH reads LockState attribute from DUT" |
| PICS: DRLK.S.A0000 |
| command: "readAttribute" |
| attribute: "LockState" |
| response: |
| value: LockStateValue |
| |
| - label: |
| "Step 1d: TH sends a Lock Door command to the DUT. If DRLK.S.F00(PIN) |
| & DRLK.S.F07(COTA), include a Valid PINCode in the Lock Door command." |
| PICS: DRLK.S.C00.Rsp && DRLK.S.F00 && DRLK.S.F07 && DRLK.S.A0000 |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "PINCode" |
| value: "123456" |
| |
| - label: "Step 1d: TH sends a Lock Door command to the DUT." |
| PICS: DRLK.S.C00.Rsp && !DRLK.S.F00 && !DRLK.S.F07 && DRLK.S.A0000 |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| |
| - label: "Wait after Lock Door" |
| PICS: DRLK.S.C00.Rsp |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: WaitAfterLockAandUnlockDoor |
| |
| - label: "Step 1d: TH reads LockState attribute from DUT" |
| PICS: DRLK.S.A0000 |
| command: "readAttribute" |
| attribute: "LockState" |
| response: |
| value: 1 |
| |
| - label: |
| "Step 1e: TH sends a Unlock Door command to the DUT. If |
| DRLK.S.F00(PIN) & DRLK.S.F07(COTA), include a Valid PINCode in the |
| Unlock Door command" |
| PICS: DRLK.S.C01.Rsp && !DRLK.S.F00 && !DRLK.S.F07 && DRLK.S.A0000 |
| command: "UnlockDoor" |
| timedInteractionTimeoutMs: 1000 |
| |
| - label: "Step 1e: TH sends a Unlock Door command to the DUT." |
| PICS: DRLK.S.C01.Rsp && DRLK.S.F00 && DRLK.S.F07 && DRLK.S.A0000 |
| command: "UnlockDoor" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "PINCode" |
| value: "123456" |
| |
| - label: "Wait after Unlock Door" |
| PICS: DRLK.S.C00.Rsp |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: WaitAfterLockAandUnlockDoor |
| |
| - label: "Step 1e: TH reads LockState attribute from DUT" |
| PICS: DRLK.S.A0000 |
| command: "readAttribute" |
| attribute: "LockState" |
| response: |
| value: 2 |
| |
| - label: "Step 1f: Simulate a not fully locked scenario on the DUT." |
| PICS: |
| DRLK.S.A0000 && DRLK.S.M.SimulateNotFullyLocked && |
| PICS_SKIP_SAMPLE_APP |
| verification: | |
| vendor will give instructions on how to simulate if applicable and if that is possible, then send the below command to read the lock state attribute. |
| |
| ./chip-tool doorlock read lock-state 1 1 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 2a: TH reads LockType attribute from DUT" |
| PICS: DRLK.S.A0001 |
| command: "readAttribute" |
| attribute: "LockType" |
| response: |
| saveAs: LockTypeValue |
| constraints: |
| type: enum8 |
| minValue: 0 |
| maxValue: 11 |
| |
| - label: "Step 2b: TH writes LockType attribute as 10" |
| PICS: DRLK.S.A0001 |
| command: "writeAttribute" |
| attribute: "LockType" |
| arguments: |
| value: 10 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 2c: TH reads LockType attribute from DUT" |
| PICS: DRLK.S.A0001 |
| command: "readAttribute" |
| attribute: "LockType" |
| response: |
| value: LockTypeValue |
| |
| - label: "Step 3a: TH reads ActuatorEnabled attribute from DUT" |
| PICS: DRLK.S.A0002 |
| command: "readAttribute" |
| attribute: "ActuatorEnabled" |
| response: |
| saveAs: ActuatorEnabledValue |
| constraints: |
| type: boolean |
| minValue: 0 |
| maxValue: 1 |
| |
| - label: "Step 3b: TH writes ActuatorEnabled attribute as 0" |
| PICS: DRLK.S.A0002 |
| command: "writeAttribute" |
| attribute: "ActuatorEnabled" |
| arguments: |
| value: 0 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 3c: TH reads ActuatorEnabled attribute from DUT" |
| PICS: DRLK.S.A0002 |
| command: "readAttribute" |
| attribute: "ActuatorEnabled" |
| response: |
| value: ActuatorEnabledValue |
| |
| - label: "Step 4a: TH reads DoorState attribute from DUT" |
| PICS: DRLK.S.F05 && DRLK.S.A0003 |
| command: "readAttribute" |
| attribute: "DoorState" |
| response: |
| saveAs: DoorStateValue |
| constraints: |
| type: enum8 |
| minValue: 0 |
| maxValue: 5 |
| |
| - label: "Step 4b: TH writes DoorState attribute as 1" |
| PICS: DRLK.S.F05 && DRLK.S.A0003 |
| command: "writeAttribute" |
| attribute: "DoorState" |
| arguments: |
| value: 1 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 4c: TH reads DoorState attribute from DUT" |
| PICS: DRLK.S.F05 && DRLK.S.A0003 |
| command: "readAttribute" |
| attribute: "DoorState" |
| response: |
| value: DoorStateValue |
| |
| - label: "Step 5a: TH reads DoorOpenEvents attribute from DUT" |
| PICS: DRLK.S.F05 && DRLK.S.A0004 |
| command: "readAttribute" |
| attribute: "DoorOpenEvents" |
| response: |
| constraints: |
| type: int32u |
| minValue: 0 |
| maxValue: 4294967294 |
| |
| - label: "Step 5b: TH writes DoorOpenEvents attribute as 0" |
| PICS: DRLK.S.A0004 |
| command: "writeAttribute" |
| attribute: "DoorOpenEvents" |
| arguments: |
| value: 0 |
| |
| #- label: "Step 5c: TH reads DoorOpenEvents attribute from DUT" |
| # PICS: DRLK.S.A0004.Write |
| # command: "readAttribute" |
| # attribute: "DoorOpenEvents" |
| # response: |
| # value: 10 |
| |
| #Test plan issue: https://github.com/CHIP-Specifications/chip-test-plans/issues/2863 |
| - label: "Step 5c: TH reads DoorOpenEvents attribute from DUT" |
| PICS: DRLK.S.A0004 && PICS_SKIP_SAMPLE_APP |
| verification: | |
| This is an Optional attribute, so its not compulsory to get the expected outcome |
| |
| ./chip-tool doorlock read door-open-events 1 1 |
| |
| Via the TH (chip-tool), verify that the DoorOpenEvents attribute value as 10. |
| |
| [1654675019.286903][3337:3342] CHIP:DMG: status = 0x86 (UNSUPPORTED_ATTRIBUTE), |
| [1654675019.286939][3337:3342] CHIP:DMG: }, |
| [1654675019.286974][3337:3342] CHIP:DMG: |
| [1654675019.287003][3337:3342] CHIP:DMG: }, |
| [1654675019.287039][3337:3342] CHIP:DMG: |
| [1654675019.287067][3337:3342] CHIP:DMG: }, |
| [1654675019.287100][3337:3342] CHIP:DMG: |
| [1654675019.287125][3337:3342] CHIP:DMG: ], |
| [1654675019.287156][3337:3342] CHIP:DMG: |
| [1654675019.287182][3337:3342] CHIP:DMG: SuppressResponse = true, |
| [1654675019.287209][3337:3342] CHIP:DMG: InteractionModelRevision = 1 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 6a: TH reads DoorClosedEvents attribute from DUT" |
| PICS: DRLK.S.F05 && DRLK.S.A0005 |
| command: "readAttribute" |
| attribute: "DoorClosedEvents" |
| response: |
| constraints: |
| type: int32u |
| minValue: 0 |
| maxValue: 4294967294 |
| |
| - label: "Step 6b: TH writes DoorClosedEvents attribute as 0" |
| PICS: DRLK.S.A0005 |
| command: "writeAttribute" |
| attribute: "DoorClosedEvents" |
| arguments: |
| value: 0 |
| |
| #- label: "Step 6c: TH reads DoorClosedEvents attribute from DUT" |
| # PICS: DRLK.S.A0005.Write |
| # command: "readAttribute" |
| # attribute: "DoorClosedEvents" |
| # response: |
| # value: 11 |
| |
| #Test plan issue: https://github.com/CHIP-Specifications/chip-test-plans/issues/2863 |
| - label: "Step 6c: TH reads DoorOpenEvents attribute from DUT" |
| PICS: DRLK.S.A0005 && PICS_SKIP_SAMPLE_APP |
| verification: | |
| This is an Optional attribute, so its not compulsory to get the expected outcome |
| |
| ./chip-tool doorlock read door-closed-events 1 1 |
| |
| Via the TH (chip-tool), verify that the DoorClosedEvents attribute value as 11. |
| |
| [1654675103.637778][3346:3351] CHIP:DMG: StatusIB = |
| [1654675103.637816][3346:3351] CHIP:DMG: { |
| [1654675103.637853][3346:3351] CHIP:DMG: status = 0x86 (UNSUPPORTED_ATTRIBUTE), |
| [1654675103.637886][3346:3351] CHIP:DMG: }, |
| [1654675103.637923][3346:3351] CHIP:DMG: |
| [1654675103.637956][3346:3351] CHIP:DMG: }, |
| [1654675103.637994][3346:3351] CHIP:DMG: |
| [1654675103.638021][3346:3351] CHIP:DMG: }, |
| [1654675103.638054][3346:3351] CHIP:DMG: |
| [1654675103.638078][3346:3351] CHIP:DMG: ], |
| [1654675103.638109][3346:3351] CHIP:DMG: |
| [1654675103.638133][3346:3351] CHIP:DMG: SuppressResponse = true, |
| [1654675103.638159][3346:3351] CHIP:DMG: InteractionModelRevision = 1 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 7a: TH reads OpenPeriod attribute from DUT" |
| PICS: DRLK.S.F05 && DRLK.S.A0006 |
| command: "readAttribute" |
| attribute: "OpenPeriod" |
| response: |
| constraints: |
| type: int16u |
| minValue: 0 |
| maxValue: 65534 |
| |
| - label: "Step 7b: TH writes OpenPeriod attribute as 2 minutes" |
| PICS: DRLK.S.A0006 |
| command: "writeAttribute" |
| attribute: "OpenPeriod" |
| arguments: |
| value: 2 |
| |
| - label: "Step 7c: TH reads OpenPeriod attribute from DUT" |
| PICS: DRLK.S.A0006 |
| command: "readAttribute" |
| attribute: "OpenPeriod" |
| response: |
| value: 2 |
| |
| - label: "Step 8a: TH reads NumberOfTotal UsersSupported attribute from DUT" |
| PICS: DRLK.S.F08 && DRLK.S.A0011 |
| command: "readAttribute" |
| attribute: "NumberOfTotalUsersSupported" |
| response: |
| saveAs: NumberOfTotalUsersSupportedValue |
| constraints: |
| type: int16u |
| minValue: 0 |
| maxValue: 65534 |
| |
| - label: "Step 8b: TH writes NumberOfTotal UsersSupported attribute as 20" |
| PICS: DRLK.S.F08 && DRLK.S.A0011 |
| command: "writeAttribute" |
| attribute: "NumberOfTotalUsersSupported" |
| arguments: |
| value: 20 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 8c: TH reads NumberOfTotal UsersSupported attribute from DUT" |
| PICS: DRLK.S.F08 && DRLK.S.A0011 |
| command: "readAttribute" |
| attribute: "NumberOfTotalUsersSupported" |
| response: |
| value: NumberOfTotalUsersSupportedValue |
| |
| - label: "Step 9a: TH reads NumberOfPINUsersSupported attribute from DUT" |
| PICS: DRLK.S.F00 && DRLK.S.A0012 |
| command: "readAttribute" |
| attribute: "NumberOfPINUsersSupported" |
| response: |
| saveAs: NumberOfPINUsersSupportedValue |
| constraints: |
| type: int16u |
| minValue: 0 |
| maxValue: 65534 |
| |
| - label: "Step 9b: TH writes NumberOfPINUsersSupported attribute as 25" |
| PICS: DRLK.S.F00 && DRLK.S.A0012 |
| command: "writeAttribute" |
| attribute: "NumberOfPINUsersSupported" |
| arguments: |
| value: 25 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 9c: TH reads NumberOfPINUsersSupported attribute from DUT" |
| PICS: DRLK.S.F00 && DRLK.S.A0012 |
| command: "readAttribute" |
| attribute: "NumberOfPINUsersSupported" |
| response: |
| value: NumberOfPINUsersSupportedValue |
| |
| - label: "Step 10a: TH reads NumberOfRFID UsersSupported attribute from DUT" |
| PICS: DRLK.S.F01 && DRLK.S.A0013 |
| command: "readAttribute" |
| attribute: "NumberOfRFIDUsersSupported" |
| response: |
| saveAs: NumberOfRFIDUsersSupportedValue |
| constraints: |
| type: int16u |
| minValue: 0 |
| maxValue: 65534 |
| |
| - label: "Step 10b: TH writes NumberOfRFID UsersSupported attribute as 30" |
| PICS: DRLK.S.F01 && DRLK.S.A0013 |
| command: "writeAttribute" |
| attribute: "NumberOfRFIDUsersSupported" |
| arguments: |
| value: 30 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 10c: TH reads NumberOfRFID UsersSupported attribute from DUT" |
| PICS: DRLK.S.F01 && DRLK.S.A0013 |
| command: "readAttribute" |
| attribute: "NumberOfRFIDUsersSupported" |
| response: |
| value: NumberOfRFIDUsersSupportedValue |
| |
| - label: |
| "Step 11a: TH reads NumberOfWeekDays SchedulesSupporterUser attribute |
| from DUT" |
| PICS: DRLK.S.F04 && DRLK.S.A0014 |
| command: "readAttribute" |
| attribute: "NumberOfWeekDaySchedulesSupportedPerUser" |
| response: |
| saveAs: NumberOfWeekDaysSchedulesSupporterUserValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: |
| "Step 11b: TH writes NumberOfWeekDaySchedules SupportedPerUser |
| attribute as 31" |
| PICS: DRLK.S.F04 && DRLK.S.A0014 |
| command: "writeAttribute" |
| attribute: "NumberOfWeekDaySchedulesSupportedPerUser" |
| arguments: |
| value: 31 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 11c: TH reads NumberOfWeekDaySchedules SupportedPerUser |
| attribute from DUT" |
| PICS: DRLK.S.F04 && DRLK.S.A0014 |
| command: "readAttribute" |
| attribute: "NumberOfWeekDaySchedulesSupportedPerUser" |
| response: |
| value: NumberOfWeekDaysSchedulesSupporterUserValue |
| |
| - label: |
| "Step 12a: TH reads NumberOfYearDay SchedulesSupportedPeruser |
| attribute from DUT" |
| PICS: DRLK.S.F0a && DRLK.S.A0015 |
| command: "readAttribute" |
| attribute: "NumberOfYearDaySchedulesSupportedPerUser" |
| response: |
| saveAs: NumberOfYearDaySchedulesSupportedPeruserValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: |
| "Step 12b: TH writes NumberOfYearDay SchedulesSupportedPerUser |
| attribute as 35" |
| PICS: DRLK.S.F0a && DRLK.S.A0015 |
| command: "writeAttribute" |
| attribute: "NumberOfYearDaySchedulesSupportedPerUser" |
| arguments: |
| value: 35 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 12c: TH reads NumberOfYearDay SchedulesSupportedPerUser |
| attribute from DUT" |
| PICS: DRLK.S.F0a && DRLK.S.A0015 |
| command: "readAttribute" |
| attribute: "NumberOfYearDaySchedulesSupportedPerUser" |
| response: |
| value: NumberOfYearDaySchedulesSupportedPeruserValue |
| |
| - label: |
| "Step 13a: TH reads NumberOfHoliDay SchedulesSupported attribute from |
| DUT" |
| PICS: DRLK.S.F0b && DRLK.S.A0016 |
| command: "readAttribute" |
| attribute: "NumberOfHolidaySchedulesSupported" |
| response: |
| saveAs: NumberOfHoliDaySchedulesSupportedValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: |
| "Step 13b: TH writes NumberOfHoliday SchedulesSupported attribute as |
| 36" |
| PICS: DRLK.S.F0b && DRLK.S.A0016 |
| command: "writeAttribute" |
| attribute: "NumberOfHolidaySchedulesSupported" |
| arguments: |
| value: 36 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 13c: TH reads NumberOfHoliday SchedulesSupported attribute from |
| DUT" |
| PICS: DRLK.S.F0b && DRLK.S.A0016 |
| command: "readAttribute" |
| attribute: "NumberOfHolidaySchedulesSupported" |
| response: |
| value: NumberOfHoliDaySchedulesSupportedValue |
| |
| - label: "Step 14a: TH reads MaxPINCodeLength attribute from DUT" |
| PICS: DRLK.S.F00 && DRLK.S.A0017 |
| command: "readAttribute" |
| attribute: "MaxPINCodeLength" |
| response: |
| saveAs: MaxPINCodeLengthValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: "Step 14b: TH writes MaxPINCodeLength attribute as 85" |
| PICS: DRLK.S.F00 && DRLK.S.A0017 |
| command: "writeAttribute" |
| attribute: "MaxPINCodeLength" |
| arguments: |
| value: 85 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 14c: TH reads MaxPINCodeLength attribute from DUT" |
| PICS: DRLK.S.F00 && DRLK.S.A0017 |
| command: "readAttribute" |
| attribute: "MaxPINCodeLength" |
| response: |
| value: MaxPINCodeLengthValue |
| |
| - label: "Step 15a: TH reads MinPINCodeLength attribute from DUT" |
| PICS: DRLK.S.F00 && DRLK.S.A0018 |
| command: "readAttribute" |
| attribute: "MinPINCodeLength" |
| response: |
| saveAs: MinPINCodeLengthValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: "Step 15b: TH writes MinPINCodeLength attribute as 63" |
| PICS: DRLK.S.F00 && DRLK.S.A0018 |
| command: "writeAttribute" |
| attribute: "MinPINCodeLength" |
| arguments: |
| value: 63 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 15c: TH reads MinPINCodeLength attribute from DUT" |
| PICS: DRLK.S.F00 && DRLK.S.A0018 |
| command: "readAttribute" |
| attribute: "MinPINCodeLength" |
| response: |
| value: MinPINCodeLengthValue |
| |
| - label: "Step 16a: TH reads MaxRFIDCodeLength attribute from DUT" |
| PICS: DRLK.S.F01 && DRLK.S.A0019 |
| command: "readAttribute" |
| attribute: "MaxRFIDCodeLength" |
| response: |
| saveAs: MaxRFIDCodeLengthValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: "Step 16b: TH writes MaxRFIDCodeLength attribute as 46" |
| PICS: DRLK.S.F01 && DRLK.S.A0019 |
| command: "writeAttribute" |
| attribute: "MaxRFIDCodeLength" |
| arguments: |
| value: 46 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 16c: TH reads MaxRFIDCodeLength attribute from DUT" |
| PICS: DRLK.S.F01 && DRLK.S.A0019 |
| command: "readAttribute" |
| attribute: "MaxRFIDCodeLength" |
| response: |
| value: MaxRFIDCodeLengthValue |
| |
| - label: "Step 17a: TH reads MinRFIDCodeLength attribute from DUT" |
| PICS: DRLK.S.F01 && DRLK.S.A001a |
| command: "readAttribute" |
| attribute: "MinRFIDCodeLength" |
| response: |
| saveAs: MinRFIDCodeLengthValue |
| constraints: |
| type: int16u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: "Step 17b: TH writes MinRFIDCodeLength attribute as 17" |
| PICS: DRLK.S.F01 && DRLK.S.A001a |
| command: "writeAttribute" |
| attribute: "MinRFIDCodeLength" |
| arguments: |
| value: 17 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 17c: TH reads MinRFIDCodeLength attribute from DUT" |
| PICS: DRLK.S.F01 && DRLK.S.A001a |
| command: "readAttribute" |
| attribute: "MinRFIDCodeLength" |
| response: |
| value: MinRFIDCodeLengthValue |
| |
| - label: "Step 18a: TH reads Credential RulesSupport attribute from DUT" |
| PICS: DRLK.S.F08 && DRLK.S.A001b |
| command: "readAttribute" |
| attribute: "CredentialRulesSupport" |
| response: |
| saveAs: CredentialRulesSupportValue |
| constraints: |
| type: bitmap8 |
| minValue: 0 |
| maxValue: 2 |
| |
| - label: |
| "Step 18b: TH writes Credential RulesSupport attribute as bit 0 is set |
| to 1" |
| PICS: DRLK.S.F08 && DRLK.S.A001b |
| command: "writeAttribute" |
| attribute: "CredentialRulesSupport" |
| arguments: |
| value: 1 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 18c: TH reads Credential RulesSupport attribute from DUT" |
| PICS: DRLK.S.F08 && DRLK.S.A001b |
| command: "readAttribute" |
| attribute: "CredentialRulesSupport" |
| response: |
| value: CredentialRulesSupportValue |
| |
| - label: |
| "Step 19a: TH reads Language attribute from DUT TH saves the values as |
| Current_Language Code" |
| PICS: DRLK.S.A0021 |
| command: "readAttribute" |
| attribute: "Language" |
| response: |
| saveAs: Current_Language_Code |
| constraints: |
| type: char_string |
| maxLength: 3 |
| |
| - label: "Step 19b: TH writes Language attribute as fr" |
| PICS: DRLK.S.A0021 && DRLK.S.M.LanguageAttributeWritable |
| command: "writeAttribute" |
| attribute: "Language" |
| arguments: |
| value: "fr" |
| |
| - label: "Step 19b: TH writes Language attribute as fr" |
| PICS: DRLK.S.A0021 && !DRLK.S.M.LanguageAttributeWritable |
| command: "writeAttribute" |
| attribute: "Language" |
| arguments: |
| value: "fr" |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 19c: TH reads Language attribute from DUT" |
| PICS: DRLK.S.A0021 && DRLK.S.M.LanguageAttributeWritable |
| command: "readAttribute" |
| attribute: "Language" |
| response: |
| value: "fr" |
| |
| - label: "Step 19c: TH reads Language attribute from DUT" |
| PICS: DRLK.S.A0021 && !DRLK.S.M.LanguageAttributeWritable |
| command: "readAttribute" |
| attribute: "Language" |
| response: |
| value: Current_Language_Code |
| |
| - label: |
| "Step 20a: TH reads LEDSettings attribute from DUT TH saves the values |
| as Current_LEDSettings value" |
| PICS: DRLK.S.A0022 |
| command: "readAttribute" |
| attribute: "LEDSettings" |
| response: |
| saveAs: Current_LEDSettings |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 2 |
| |
| - label: "Step 20b: TH writes LEDSettings attribute as 2" |
| PICS: DRLK.S.M.LEDSettingsAttributeWritable && DRLK.S.A0022 |
| command: "writeAttribute" |
| attribute: "LEDSettings" |
| arguments: |
| value: 2 |
| |
| - label: "Step 20b: TH writes LEDSettings attribute as 2" |
| PICS: " !DRLK.S.M.LEDSettingsAttributeWritable && DRLK.S.A0022 " |
| command: "writeAttribute" |
| attribute: "LEDSettings" |
| arguments: |
| value: 2 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 20c: TH reads LEDSettings attribute from DUT" |
| PICS: DRLK.S.M.LEDSettingsAttributeWritable && DRLK.S.A0022 |
| command: "readAttribute" |
| attribute: "LEDSettings" |
| response: |
| value: 2 |
| |
| - label: "Step 20c: TH reads LEDSettings attribute from DUT" |
| PICS: " !DRLK.S.M.LEDSettingsAttributeWritable && DRLK.S.A0022 " |
| command: "readAttribute" |
| attribute: "LEDSettings" |
| response: |
| value: Current_LEDSettings |
| |
| - label: |
| "Step 21a: TH reads AutoRelockTime attribute from DUT TH saves the |
| values as Current_AutoRelockTime" |
| PICS: DRLK.S.A0023 |
| command: "readAttribute" |
| attribute: "AutoRelockTime" |
| response: |
| saveAs: Current_AutoRelockTime |
| constraints: |
| type: int32u |
| minValue: 0 |
| maxValue: 4294967294 |
| |
| - label: "Step 21b: TH writes AutoRelockTime attribute as 180 seconds" |
| PICS: DRLK.S.M.AutoRelockTimeAttributeWritable && DRLK.S.A0023 |
| command: "writeAttribute" |
| attribute: "AutoRelockTime" |
| arguments: |
| value: 180 |
| |
| - label: "Step 21b: TH writes AutoRelockTime attribute as 180 seconds" |
| PICS: " !DRLK.S.M.AutoRelockTimeAttributeWritable && DRLK.S.A0023 " |
| command: "writeAttribute" |
| attribute: "AutoRelockTime" |
| arguments: |
| value: 180 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 21c: TH reads AutoRelockTime attribute from DUT" |
| PICS: DRLK.S.M.AutoRelockTimeAttributeWritable && DRLK.S.A0023 |
| command: "readAttribute" |
| attribute: "AutoRelockTime" |
| response: |
| value: 180 |
| |
| - label: "Step 21c: TH reads AutoRelockTime attribute from DUT" |
| PICS: " !DRLK.S.M.AutoRelockTimeAttributeWritable && DRLK.S.A0023 " |
| command: "readAttribute" |
| attribute: "AutoRelockTime" |
| response: |
| value: Current_AutoRelockTime |
| |
| - label: |
| "Step 22a: TH reads SoundVolume attribute from DUT TH saves the values |
| as Current_SoundVolume value" |
| PICS: DRLK.S.A0024 |
| command: "readAttribute" |
| attribute: "SoundVolume" |
| response: |
| saveAs: Current_SoundVolume |
| constraints: |
| type: int16u |
| minValue: 0 |
| maxValue: 3 |
| |
| - label: "Step 22b: TH writes SoundVolume attribute as 3" |
| PICS: DRLK.S.M.SoundVolumeAttributeWritable && DRLK.S.A0024 |
| command: "writeAttribute" |
| attribute: "SoundVolume" |
| arguments: |
| value: 3 |
| |
| - label: "Step 22b: TH writes SoundVolume attribute as 3" |
| PICS: " !DRLK.S.M.SoundVolumeAttributeWritable && DRLK.S.A0024 " |
| command: "writeAttribute" |
| attribute: "SoundVolume" |
| arguments: |
| value: 3 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 22c: TH reads SoundVolume attribute from DUT" |
| PICS: DRLK.S.M.SoundVolumeAttributeWritable && DRLK.S.A0024 |
| command: "readAttribute" |
| attribute: "SoundVolume" |
| response: |
| value: 3 |
| |
| - label: "Step 22c: TH reads SoundVolume attribute from DUT" |
| PICS: " !DRLK.S.M.SoundVolumeAttributeWritable && DRLK.S.A0024 " |
| command: "readAttribute" |
| attribute: "SoundVolume" |
| response: |
| value: Current_SoundVolume |
| |
| - label: "Step 23a: TH reads Supported OperatingModes attribute from DUT" |
| PICS: DRLK.S.A0026 |
| command: "readAttribute" |
| attribute: "SupportedOperatingModes" |
| response: |
| saveAs: Current_Supported |
| constraints: |
| type: enum16 |
| anyOf: |
| [ |
| 0xFFF6, |
| 0xFFF4, |
| 0xFFF2, |
| 0xFFF0, |
| 0xFFE6, |
| 0xFFE4, |
| 0xFFE2, |
| 0xFFE0, |
| ] |
| |
| - label: |
| "Step 23b: TH writes Supported OperatingModes attribute as bit 0 is |
| set to 0" |
| PICS: DRLK.S.A0026 |
| command: "writeAttribute" |
| attribute: "SupportedOperatingModes" |
| arguments: |
| value: 0 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 23c: TH reads Supported OperatingModes attribute from DUT" |
| PICS: DRLK.S.A0026 |
| command: "readAttribute" |
| attribute: "SupportedOperatingModes" |
| response: |
| value: Current_Supported |
| |
| - label: |
| "Step 24a: TH reads OperatingMode attribute from DUT TH saves the |
| values as Current_OperatingMode value" |
| PICS: DRLK.S.A0025 |
| command: "readAttribute" |
| attribute: "OperatingMode" |
| response: |
| saveAs: Current_OperatingMode |
| constraints: |
| type: enum8 |
| minValue: 0 |
| maxValue: 4 |
| |
| - label: |
| "Step 24b: TH writes OperatingMode attribute to a value as Normal and |
| the new value is present in SupportedOperatingModes" |
| PICS: DRLK.S.M.OperatingModeAttributeWritable && DRLK.S.A0025 |
| command: "writeAttribute" |
| attribute: "OperatingMode" |
| arguments: |
| value: 0 |
| |
| - label: |
| "Step 24b: TH writes OperatingMode attribute to a value as Normal and |
| the new value is present in SupportedOperatingModes" |
| PICS: " !DRLK.S.M.OperatingModeAttributeWritable && DRLK.S.A0025 " |
| command: "writeAttribute" |
| attribute: "OperatingMode" |
| arguments: |
| value: 0 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 24c: TH writes OperatingMode attribute to a value as |
| NoRemoteLockUnlock and the new value is present in Supported |
| OperatingModes" |
| PICS: DRLK.S.M.OperatingModeAttributeWritable && DRLK.S.A0025 |
| command: "writeAttribute" |
| attribute: "OperatingMode" |
| arguments: |
| value: 3 |
| |
| - label: |
| "Step 24c: TH writes OperatingMode attribute to a value as |
| NoRemoteLockUnlock and the new value is present in Supported |
| OperatingModes" |
| PICS: " !DRLK.S.M.OperatingModeAttributeWritable && DRLK.S.A0025 " |
| command: "writeAttribute" |
| attribute: "OperatingMode" |
| arguments: |
| value: 3 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 24d: TH reads OperatingMode attribute from DUT" |
| PICS: DRLK.S.M.OperatingModeAttributeWritable && DRLK.S.A0025 |
| command: "readAttribute" |
| attribute: "OperatingMode" |
| response: |
| constraints: |
| anyOf: [0, 3] |
| |
| - label: "Step 24d: TH reads OperatingMode attribute from DUT" |
| PICS: " !DRLK.S.M.OperatingModeAttributeWritable && DRLK.S.A0025 " |
| command: "readAttribute" |
| attribute: "OperatingMode" |
| response: |
| value: Current_OperatingMode |
| |
| - label: |
| "Step 25a: TH reads Default ConfigurationRegister attribute from DUT" |
| PICS: DRLK.S.A0027 |
| command: "readAttribute" |
| attribute: "DefaultConfigurationRegister" |
| response: |
| saveAs: ConfigurationRegisterValue |
| constraints: |
| type: bitmap16 |
| minValue: 0 |
| maxValue: 7 |
| |
| - label: |
| "Step 25b: TH writes Default ConfigurationRegister attribute as bit 0 |
| is set to 1" |
| PICS: DRLK.S.A0027 |
| command: "writeAttribute" |
| attribute: "DefaultConfigurationRegister" |
| arguments: |
| value: 1 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 25c: TH reads Default ConfigurationRegister attribute from DUT" |
| PICS: DRLK.S.A0027 |
| command: "readAttribute" |
| attribute: "DefaultConfigurationRegister" |
| response: |
| value: ConfigurationRegisterValue |
| |
| - label: |
| "Step 26a: TH reads EnableLocalProgramming attribute from DUT TH saves |
| the values as Current_EnableLocal Programming value" |
| PICS: DRLK.S.A0028 |
| command: "readAttribute" |
| attribute: "EnableLocalProgramming" |
| response: |
| saveAs: Current_EnableLocal_Programming |
| constraints: |
| type: boolean |
| |
| - label: "Step 26b: TH writes EnableLocalProgramming attribute as false" |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A0028 |
| command: "writeAttribute" |
| attribute: "EnableLocalProgramming" |
| arguments: |
| value: 0 |
| |
| - label: "Step 26b: TH writes EnableLocalProgramming attribute as false" |
| PICS: |
| " !DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A0028 " |
| command: "writeAttribute" |
| attribute: "EnableLocalProgramming" |
| arguments: |
| value: 0 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 26c: TH reads EnableLocalProgramming attribute from DUT" |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A0028 |
| command: "readAttribute" |
| attribute: "EnableLocalProgramming" |
| response: |
| value: 0 |
| |
| - label: "Step 26c: TH reads EnableLocalProgramming attribute from DUT" |
| PICS: |
| " !DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A0028 " |
| command: "readAttribute" |
| attribute: "EnableLocalProgramming" |
| response: |
| value: Current_EnableLocal_Programming |
| |
| - label: "Step 27a: TH reads EnableOneTouchLocking attribute from DUT" |
| PICS: DRLK.S.A0029 |
| command: "readAttribute" |
| attribute: "EnableOneTouchLocking" |
| response: |
| constraints: |
| type: boolean |
| |
| - label: "Step 27b: TH writes EnableOneTouchLocking attribute as true" |
| PICS: DRLK.S.A0029 |
| command: "writeAttribute" |
| attribute: "EnableOneTouchLocking" |
| arguments: |
| value: 1 |
| |
| - label: "Step 27c: TH reads EnableOneTouchLocking attribute from DUT" |
| PICS: DRLK.S.A0029 |
| command: "readAttribute" |
| attribute: "EnableOneTouchLocking" |
| response: |
| value: 1 |
| |
| - label: "Step 28a: TH reads EnableInside StatusLED attribute from DUT" |
| PICS: DRLK.S.A002a |
| command: "readAttribute" |
| attribute: "EnableInsideStatusLED" |
| response: |
| constraints: |
| type: boolean |
| |
| - label: "Step 28b: TH writes EnableInsideStatusLED attribute as true" |
| PICS: DRLK.S.A002a |
| command: "writeAttribute" |
| attribute: "EnableInsideStatusLED" |
| arguments: |
| value: 1 |
| |
| - label: "Step 28c: TH reads EnableInsideStatusLED attribute from DUT" |
| PICS: DRLK.S.A002a |
| command: "readAttribute" |
| attribute: "EnableInsideStatusLED" |
| response: |
| value: 1 |
| |
| - label: "Step 29a: TH reads EnablePrivacyModeButton attribute from DUT" |
| PICS: DRLK.S.A002b |
| command: "readAttribute" |
| attribute: "EnablePrivacyModeButton" |
| response: |
| constraints: |
| type: boolean |
| |
| - label: "Step 29b: TH writes EnablePrivacy ModeButton attribute as true" |
| PICS: DRLK.S.A002b |
| command: "writeAttribute" |
| attribute: "EnablePrivacyModeButton" |
| arguments: |
| value: 1 |
| |
| - label: "Step 29c: TH reads EnablePrivacyModeButton attribute from DUT" |
| PICS: DRLK.S.A002b |
| command: "readAttribute" |
| attribute: "EnablePrivacyModeButton" |
| response: |
| value: 1 |
| |
| - label: |
| "Step 30a: TH reads LocalProgrammingFeatures attribute from DUT TH |
| saves the values as Current_LocalProgramming Features value" |
| PICS: DRLK.S.A002c |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| saveAs: Current_LocalProgramming_Features |
| constraints: |
| type: bitmap8 |
| minValue: 0 |
| maxValue: 3 |
| |
| - label: |
| "Step 30b: TH reads LocalProgrammingFeatures attribute from DUT. |
| DRLK.S.A0028(EnableLocalProgramming) is True." |
| PICS: DRLK.S.A002c && DRLK.S.A0028 |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| constraints: |
| type: bitmap8 |
| hasMasksSet: [0x1, 0x2, 0x4, 0x8] |
| |
| - label: |
| "Step 30b: TH reads LocalProgrammingFeatures attribute from DUT. |
| DRLK.S.A0028(EnableLocalProgramming) is False." |
| PICS: DRLK.S.A002c && !DRLK.S.A0028 |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| constraints: |
| type: bitmap8 |
| hasMasksClear: [0x1, 0x2, 0x4, 0x8] |
| |
| - label: |
| "Step 30c: TH writes to LocalProgrammingFeatures to disable all the |
| features (Change all bits to 0)" |
| PICS: DRLK.S.M.LocalProgrammingFeaturesAttributeWritable && DRLK.S.A0028 |
| command: "writeAttribute" |
| attribute: "LocalProgrammingFeatures" |
| arguments: |
| value: 0 |
| |
| - label: |
| "Step 30c: TH reads LocalProgrammingFeatures attribute from DUT. |
| DRLK.S.A0028(EnableLocalProgramming) is False." |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A0028 |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| constraints: |
| type: bitmap8 |
| hasMasksClear: [0x1, 0x2, 0x4, 0x8] |
| |
| - label: "Step 30d: TH sets the EnableLocalProgramming attribute to False" |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A002c |
| command: "writeAttribute" |
| attribute: "EnableLocalProgramming" |
| arguments: |
| value: false |
| |
| - label: |
| "Step 30d: Verify that all the 4 bits in the LocalProgrammingFeatures |
| is set to 0." |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A002c |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| constraints: |
| type: bitmap8 |
| hasMasksClear: [0x1, 0x2, 0x4, 0x8] |
| |
| - label: "Step 30e: TH sets the EnableLocalProgramming attribute to True" |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A002c |
| command: "writeAttribute" |
| attribute: "EnableLocalProgramming" |
| arguments: |
| value: true |
| |
| - label: |
| "Step 30e: Verify that all the 4 bits in the LocalProgrammingFeatures |
| is set to 1." |
| PICS: DRLK.S.M.EnableLocalProgrammingAttributeWritable && DRLK.S.A002c |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| constraints: |
| type: bitmap8 |
| hasMasksSet: [0x1, 0x2, 0x4, 0x8] |
| |
| - label: |
| "Step 30f: TH sends a write message to change any one of the bits of |
| the LocalProgrammingFeatures." |
| PICS: DRLK.S.A002c && DRLK.S.M.LocalProgrammingFeaturesAttributeWritable |
| command: "writeAttribute" |
| attribute: "LocalProgrammingFeatures" |
| arguments: |
| value: 2 |
| |
| - label: |
| "Step 30f: Verify that the correct bit has been changed by doing a |
| Read on LocalProgrammingFeatures attribute.." |
| PICS: DRLK.S.M.LocalProgrammingFeaturesAttributeWritable |
| command: "readAttribute" |
| attribute: "LocalProgrammingFeatures" |
| response: |
| constraints: |
| type: bitmap8 |
| hasMasksSet: [0x2] |
| |
| - label: |
| "Step 30g: TH sends a write message to change any one of the bits of |
| the LocalProgrammingFeatures." |
| PICS: DRLK.S.A002c |
| command: "writeAttribute" |
| attribute: "LocalProgrammingFeatures" |
| arguments: |
| value: 2 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 31a: TH reads WrongCodeEntry Limit attribute from DUT TH saves |
| the values as Current_WrongCode EntryLimit value" |
| PICS: ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0030 |
| command: "readAttribute" |
| attribute: "WrongCodeEntryLimit" |
| response: |
| saveAs: Current_WrongCode_EntryLimit |
| constraints: |
| type: int8u |
| minValue: 1 |
| maxValue: 255 |
| |
| - label: "Step 31b: TH writes WrongCodeEntryLimit attribute as 8" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0030 && |
| DRLK.S.M.WrongCodeEntryLimitAttributeWritable " |
| command: "writeAttribute" |
| attribute: "WrongCodeEntryLimit" |
| arguments: |
| value: 8 |
| |
| - label: "Step 31b: TH writes WrongCodeEntryLimit attribute as 8" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0030 && |
| !DRLK.S.M.WrongCodeEntryLimitAttributeWritable " |
| command: "writeAttribute" |
| attribute: "WrongCodeEntryLimit" |
| arguments: |
| value: 8 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 31c: TH reads WrongCode EntryLimit attribute" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0030 && |
| DRLK.S.M.WrongCodeEntryLimitAttributeWritable " |
| command: "readAttribute" |
| attribute: "WrongCodeEntryLimit" |
| response: |
| value: 8 |
| |
| - label: "Step 31c: TH reads WrongCode EntryLimit attribute" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0030 && |
| !DRLK.S.M.WrongCodeEntryLimitAttributeWritable " |
| command: "readAttribute" |
| attribute: "WrongCodeEntryLimit" |
| response: |
| value: Current_WrongCode_EntryLimit |
| |
| - label: |
| "Step 32a: TH reads UserCodeTemporary DisableTime attribute from DUT |
| TH saves the values as Current_UserCode TemporaryDisableTime" |
| PICS: ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0031 |
| command: "readAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| response: |
| saveAs: Current_UserCode_TemporaryDisableTime |
| constraints: |
| type: int8u |
| minValue: 1 |
| maxValue: 255 |
| |
| - label: "Step 32b: TH writes UserCodeTemporaryDisableTime attribute as 120" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0031 && |
| DRLK.S.M.UserCodedTemporaryDisableTimeAttributeWritable " |
| command: "writeAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| arguments: |
| value: 120 |
| |
| - label: "Step 32b: TH writes UserCodeTemporaryDisableTime attribute as 120" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0031 && |
| !DRLK.S.M.UserCodedTemporaryDisableTimeAttributeWritable " |
| command: "writeAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| arguments: |
| value: 120 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 32c: TH reads UserCodeTemporary DisableTime attribute" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0031 && |
| DRLK.S.M.UserCodedTemporaryDisableTimeAttributeWritable " |
| command: "readAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| response: |
| value: 120 |
| |
| - label: "Step 32c: TH reads UserCodeTemporary DisableTime attribute" |
| PICS: |
| " ( DRLK.S.F00 || DRLK.S.F01 ) && DRLK.S.A0031 && |
| !DRLK.S.M.UserCodedTemporaryDisableTimeAttributeWritable " |
| command: "readAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| response: |
| value: Current_UserCode_TemporaryDisableTime |
| |
| - label: |
| "Step 33a: TH reads RequirePINfor RemoteOperation attribute from DUT" |
| PICS: DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 |
| command: "readAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| response: |
| saveAs: Current_RequirePINFor_RemoteOperation |
| constraints: |
| type: boolean |
| |
| - label: |
| "Step 33b: TH writes RequirePINfor RemoteOperation attribute as true" |
| PICS: |
| DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 && |
| DRLK.S.M.RequirePINForRemoteOperationAttributeWritable |
| command: "writeAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| arguments: |
| value: 1 |
| |
| - label: |
| "Step 33b: TH writes RequirePINfor RemoteOperation attribute as true" |
| PICS: |
| " DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 && |
| !DRLK.S.M.RequirePINForRemoteOperationAttributeWritable " |
| command: "writeAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| arguments: |
| value: 1 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 33c: TH reads RequirePINfor RemoteOperation attribute" |
| PICS: |
| DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 && |
| DRLK.S.M.RequirePINForRemoteOperationAttributeWritable |
| command: "readAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| response: |
| value: 1 |
| |
| - label: "Step 33c: TH reads RequirePINfor RemoteOperation attribute" |
| PICS: |
| " DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 && |
| !DRLK.S.M.RequirePINForRemoteOperationAttributeWritable " |
| command: "readAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| response: |
| value: Current_RequirePINFor_RemoteOperation |
| |
| - label: |
| "Step 34a: TH reads ExpiringUserTimeOut attribute from DUT TH saves |
| the values as Current_ExpiringUserTimeOut" |
| PICS: DRLK.S.F08 && DRLK.S.A0035 |
| command: "readAttribute" |
| attribute: "ExpiringUserTimeout" |
| response: |
| saveAs: Current_ExpiringUserTimeOut |
| constraints: |
| type: int16u |
| minValue: 1 |
| maxValue: 2880 |
| |
| - label: "Step 34b: TH writes ExpiringUserTimeout attribute as 10 minutes" |
| PICS: |
| DRLK.S.F08 && DRLK.S.A0035 && |
| DRLK.S.M.ExpiringUserTimeOutAttributeWritable |
| command: "writeAttribute" |
| attribute: "ExpiringUserTimeout" |
| arguments: |
| value: 10 |
| |
| - label: "Step 34b: TH writes ExpiringUserTimeout attribute as 10 minutes" |
| PICS: |
| DRLK.S.F08 && !DRLK.S.M.ExpiringUserTimeOutAttributeWritable && |
| DRLK.S.A0035 |
| command: "writeAttribute" |
| attribute: "ExpiringUserTimeout" |
| arguments: |
| value: 10 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Step 34c: TH reads ExpiringUserTimeout attribute" |
| PICS: |
| DRLK.S.F08 && DRLK.S.A0035 && |
| DRLK.S.M.ExpiringUserTimeOutAttributeWritable |
| command: "readAttribute" |
| attribute: "ExpiringUserTimeout" |
| response: |
| value: 10 |
| |
| - label: "Step 34c: TH reads ExpiringUserTimeout attribute" |
| PICS: |
| " DRLK.S.F08 && DRLK.S.A0035 && |
| !DRLK.S.M.ExpiringUserTimeOutAttributeWritable " |
| command: "readAttribute" |
| attribute: "ExpiringUserTimeout" |
| response: |
| value: Current_ExpiringUserTimeOut |
| |
| - label: |
| "Step 35a: TH reads NumberOfCredentials SupportedPerUser attribute |
| from DUT" |
| PICS: DRLK.S.F08 && DRLK.S.A001c |
| command: "readAttribute" |
| attribute: "NumberOfCredentialsSupportedPerUser" |
| response: |
| saveAs: NumberOfCredentialsSupportedPerUserValue |
| constraints: |
| type: int8u |
| minValue: 0 |
| maxValue: 255 |
| |
| - label: |
| "Step 35b: TH writes NumberOfCredentials SupportedPerUser attribute as |
| 85" |
| PICS: DRLK.S.F08 && DRLK.S.A001c |
| command: "writeAttribute" |
| attribute: "NumberOfCredentialsSupportedPerUser" |
| arguments: |
| value: 85 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: |
| "Step 35c: TH reads NumberOfCredentials SupportedPerUser attribute |
| from DUT" |
| PICS: DRLK.S.F08 && DRLK.S.A001c |
| command: "readAttribute" |
| attribute: "NumberOfCredentialsSupportedPerUser" |
| response: |
| value: NumberOfCredentialsSupportedPerUserValue |
| |
| - label: "Cleanup the created user" |
| PICS: DRLK.S.F00 && DRLK.S.F07 |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "UserIndex" |
| value: 1 |
| |
| - label: "Clean the created credential" |
| PICS: DRLK.S.F00 && DRLK.S.F07 && DRLK.S.C26.Rsp |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "Credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
