| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 3.5.1. [TC-IDM-5.1] Timed Request Action from DUT to TH. [DUT_Client] |
| |
| PICS: |
| - MCORE.IDM.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as client test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| The DUT should have a way of triggering the Timed Request Message for Testing. Test Step #3 might not be testable. |
| disabled: true |
| |
| - label: |
| "Step 1: DUT sends the Timed Request to the TH and then sends an |
| Invoke Request Message to the TH after receiving the status response |
| message from the TH. The Timed Request Message should contain a |
| timeout value in milliseconds. (Example - 200 milliseconds)" |
| PICS: MCORE.IDM.C.InvokeRequest |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool onoff on 1 1 --timedInteractionTimeoutMs 200 |
| |
| On the TH(all-clusters-app) verify the received timed request message has the timeout value as sent by the DUT(chip-tool) and verify that the message is unicast. |
| [1655797318.624018][7331:7331] CHIP:EM: Handling via exchange: 28067r, Delegate: 0xaaaad9aed418 |
| [1655797318.624129][7331:7331] CHIP:DMG: TimedRequestMessage = |
| [1655797318.624185][7331:7331] CHIP:DMG: { |
| [1655797318.624235][7331:7331] CHIP:DMG: TimeoutMs = 0xc8, |
| [1655797318.624289][7331:7331] CHIP:DMG: InteractionModelRevision = 1 |
| [1655797318.624339][7331:7331] CHIP:DMG: } |
| [1655797318.624394][7331:7331] CHIP:DMG: Got Timed Request with timeout 200: handler 0xaaaaf9f93440 exchange 28067r |
| |
| On the TH(all-clusters-app) Verify that the DUT(chip-tool) sends the Invoke Request Message to the TH(all-clusters-app) before the specified timeout value and Invoke Request has TimedRequest set to True. |
| [1655797318.626273][7331:7331] CHIP:DMG: Handing timed invoke to IM engine: handler 0xaaaaf9f93440 exchange 28067r |
| [1655797318.626358][7331:7331] CHIP:DMG: InvokeRequestMessage = |
| [1655797318.626411][7331:7331] CHIP:DMG: { |
| [1655797318.626460][7331:7331] CHIP:DMG: suppressResponse = false, |
| [1655797318.626517][7331:7331] CHIP:DMG: timedRequest = true, |
| [1655797318.626569][7331:7331] CHIP:DMG: InvokeRequests = |
| [1655797318.626633][7331:7331] CHIP:DMG: [ |
| [1655797318.626684][7331:7331] CHIP:DMG: CommandDataIB = |
| [1655797318.626742][7331:7331] CHIP:DMG: { |
| [1655797318.626796][7331:7331] CHIP:DMG: CommandPathIB = |
| [1655797318.626866][7331:7331] CHIP:DMG: { |
| [1655797318.626934][7331:7331] CHIP:DMG: EndpointId = 0x1, |
| [1655797318.627002][7331:7331] CHIP:DMG: ClusterId = 0x6, |
| [1655797318.627037][7331:7331] CHIP:DMG: CommandId = 0x1, |
| [1655797318.627070][7331:7331] CHIP:DMG: }, |
| [1655797318.627148][7331:7331] CHIP:DMG: |
| [1655797318.627179][7331:7331] CHIP:DMG: CommandFields = |
| [1655797318.627209][7331:7331] CHIP:DMG: { |
| [1655797318.627243][7331:7331] CHIP:DMG: }, |
| [1655797318.627274][7331:7331] CHIP:DMG: }, |
| [1655797318.627306][7331:7331] CHIP:DMG: |
| [1655797318.627330][7331:7331] CHIP:DMG: ], |
| [1655797318.627359][7331:7331] CHIP:DMG: |
| [1655797318.627383][7331:7331] CHIP:DMG: InteractionModelRevision = 1 |
| [1655797318.627406][7331:7331] CHIP:DMG: }, |
| [1655797318.627467][7331:7331] CHIP:DMG: AccessControl: checking f=1 a=c s=0x000000000001B669 t= c=0x0000_0006 e=1 p=o |
| disabled: true |
| |
| - label: |
| "Step 2: DUT sends the Timed Request to the TH and then sends a |
| WriteRequestMessage to the TH after receiving the status response |
| message from the TH. The Timed Request Message should contain a |
| timeout value in milliseconds. (Example - 200 milliseconds)" |
| PICS: MCORE.IDM.C.WriteRequest |
| verification: | |
| Product maker needs to provide instructions for how to trigger the command on the DUT. For comparison, the DUT behavior for this test step can be simulated using chip-tool (when DUT is a commissioner/Client) |
| |
| ./chip-tool onoff write on-time 2 1 1 --timedInteractionTimeoutMs 200 |
| |
| |
| On the TH(all-clusters-app) verify the received timed request message has the timeout value as sent by the DUT(chip-tool) and verify that the message is unicast. |
| |
| [1657459639.597900][11525:11525] CHIP:EM: Handling via exchange: 17116r, Delegate: 0xaaaae00c1430 |
| [1657459639.598014][11525:11525] CHIP:DMG: TimedRequestMessage = |
| [1657459639.598055][11525:11525] CHIP:DMG: { |
| [1657459639.598091][11525:11525] CHIP:DMG: TimeoutMs = 0xc8, |
| [1657459639.598147][11525:11525] CHIP:DMG: InteractionModelRevision = 1 |
| [1657459639.598174][11525:11525] CHIP:DMG: } |
| [1657459639.598204][11525:11525] CHIP:DMG: Got Timed Request with timeout 200: handler 0xaaab1651bac0 exchange 17116r |
| [1657459639.598282][11525:11525] CHIP:EM: Piggybacking Ack for MessageCounter:161619532 on exchange: 17116r |
| |
| On the TH(all-clusters-app) Verify that the DUT(chip-tool) sends the WriteRequestMessage to the TH(all-clusters-app) before the specified timeout value and WriteRequestMessage has the TimedRequest field set to TRUE. |
| [1657459639.599816][11525:11525] CHIP:IM: Received Write request |
| [1657459639.599844][11525:11525] CHIP:DMG: IM WH moving to [Initialized] |
| [1657459639.599908][11525:11525] CHIP:DMG: WriteRequestMessage = |
| [1657459639.599942][11525:11525] CHIP:DMG: { |
| [1657459639.599973][11525:11525] CHIP:DMG: suppressResponse = false, |
| [1657459639.600009][11525:11525] CHIP:DMG: timedRequest = true, |
| [1657459639.600041][11525:11525] CHIP:DMG: AttributeDataIBs = |
| [1657459639.600081][11525:11525] CHIP:DMG: [ |
| [1657459639.600114][11525:11525] CHIP:DMG: AttributeDataIB = |
| [1657459639.600151][11525:11525] CHIP:DMG: { |
| [1657459639.600185][11525:11525] CHIP:DMG: AttributePathIB = |
| [1657459639.600231][11525:11525] CHIP:DMG: { |
| [1657459639.600273][11525:11525] CHIP:DMG: Endpoint = 0x1, |
| [1657459639.600323][11525:11525] CHIP:DMG: Cluster = 0x6, |
| [1657459639.600368][11525:11525] CHIP:DMG: Attribute = 0x0000_4001, |
| [1657459639.600409][11525:11525] CHIP:DMG: } |
| [1657459639.600452][11525:11525] CHIP:DMG: |
| [1657459639.600497][11525:11525] CHIP:DMG: Data = 2, |
| [1657459639.600535][11525:11525] CHIP:DMG: }, |
| [1657459639.600578][11525:11525] CHIP:DMG: |
| [1657459639.600610][11525:11525] CHIP:DMG: ], |
| [1657459639.600648][11525:11525] CHIP:DMG: |
| [1657459639.600681][11525:11525] CHIP:DMG: moreChunkedMessages = false, |
| [1657459639.600715][11525:11525] CHIP:DMG: InteractionModelRevision = 1 |
| [1657459639.600746][11525:11525] CHIP:DMG: }, |
| [1657459639.600842][11525:11525] CHIP:DMG: AccessControl: checking f=1 a=c s=0x000000000001B669 t= c=0x0000_0006 e=1 p=o |
| [1657459639.600888][11525:11525] CHIP:DMG: AccessControl: allowed |
| [1657459639.600936][11525:11525] CHIP:DMG: Endpoint 1, Cluster 0x0000_0006 update version to 1979c48 |
| disabled: true |
| |
| - label: |
| "Step 3: DUT sends the Timed Request to the TH The Timed Request |
| Message should contain a timeout value in milliseconds. (Example - 200 |
| milliseconds) Force the TH to not send a response back to the DUT for |
| the received timed request." |
| PICS: MCORE.IDM.C.WriteRequest || MCORE.IDM.C.InvokeRequest |
| verification: | |
| Mark this as not testable /NA. Out of Scope |
| disabled: true |
