| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 4.2.5. [TC-SMOKECO-2.5] Secondary Functionality - Optional with DUT as |
| Server |
| |
| PICS: |
| - SMOKECO.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Smoke CO Alarm" |
| endpoint: 1 |
| timeout: 6090 |
| TEST_EVENT_TRIGGER_KEY: |
| type: octet_string |
| defaultValue: "hex:00112233445566778899aabbccddeeff" |
| TEST_EVENT_TRIGGER_WARNING_SMOKE_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000090" |
| TEST_EVENT_TRIGGER_CRITICAL_SMOKE_ALARM: |
| type: int64u |
| defaultValue: "0x005c00000000009c" |
| TEST_EVENT_TRIGGER_SMOKE_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a0" |
| TEST_EVENT_TRIGGER_WARNING_CO_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000091" |
| TEST_EVENT_TRIGGER_CRITICAL_CO_ALARM: |
| type: int64u |
| defaultValue: "0x005c00000000009d" |
| TEST_EVENT_TRIGGER_CO_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a1" |
| TEST_EVENT_TRIGGER_DEVICE_MUTED: |
| type: int64u |
| defaultValue: "0x005c00000000009b" |
| TEST_EVENT_TRIGGER_DEVICE_MUTED_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000ab" |
| TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000092" |
| TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a2" |
| TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM: |
| type: int64u |
| defaultValue: "0x005c000000000094" |
| TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a4" |
| TEST_EVENT_TRIGGER_CONTAMINATION_STATE_HIGH: |
| type: int64u |
| defaultValue: "0x005c000000000096" |
| TEST_EVENT_TRIGGER_CONTAMINATION_STATE_LOW: |
| type: int64u |
| defaultValue: "0x005c000000000097" |
| TTEST_EVENT_TRIGGER_CONTAMINATION_STATE_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a6" |
| TEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_HIGH: |
| type: int64u |
| defaultValue: "0x005c000000000098" |
| TEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_LOW: |
| type: int64u |
| defaultValue: "0x005c000000000099" |
| TTEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_CLEAR: |
| type: int64u |
| defaultValue: "0x005c0000000000a8" |
| |
| tests: |
| - label: "Step 1: Commission DUT to TH" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: |
| "Step 2: TH subscribes to InterconnectSmokeAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0008 |
| command: "subscribeAttribute" |
| attribute: "InterconnectSmokeAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 3: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0008 && SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "TH gets last event number from DUT" |
| PICS: SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| |
| - label: |
| "Step 4: TH reads TestEventTriggersEnabled attribute from General |
| Diagnostics Cluster" |
| PICS: SMOKECO.S.A0008 && DGGEN.S.A0008 |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "readAttribute" |
| attribute: "TestEventTriggersEnabled" |
| response: |
| value: 1 |
| |
| - label: |
| "Step 5: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect Smoke Alarm Test |
| Event" |
| PICS: SMOKECO.S.A0008 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM |
| |
| - label: |
| "Step 6: TH waits for a report of InterconnectSmokeAlarm attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0008 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-smoke-alarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0008 DataVersion: 1795725838 |
| [TOO] InterconnectSmokeAlarm: 1 |
| [1692347356.664341][2311:2313] CHIP:EM: <<< [E:44547i S:37350 M:57275061 (Ack:90753262)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 7: TH reads InterconnectSmokeAlarm event from DUT" |
| PICS: SMOKECO.S.A0008 && SMOKECO.S.E08 |
| command: "readEvent" |
| event: "InterconnectSmokeAlarm" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: { AlarmSeverityLevel: 1 } |
| |
| - label: "Step 8: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0008 && SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 7 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 9: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect Smoke Alarm Test |
| Event Clear" |
| PICS: SMOKECO.S.A0008 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_SMOKE_ALARM_CLEAR |
| |
| - label: |
| "Step 10: TH waits for a report of InterconnectSmokeAlarm attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0008 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-smoke-alarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0008 DataVersion: 1795725838 |
| [TOO] InterconnectSmokeAlarm: 0 |
| [1692347356.664341][2311:2313] CHIP:EM: <<< [E:44547i S:37350 M:57275061 (Ack:90753262)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 11: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0008 && SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 12: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.A0008 && SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 13: TH subscribes to InterconnectCOAlarm attribute from DUT" |
| PICS: SMOKECO.S.A0009 |
| command: "subscribeAttribute" |
| attribute: "InterconnectCOAlarm" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 14: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0009 && SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 15: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect CO Alarm Test Event" |
| PICS: SMOKECO.S.A0009 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM |
| |
| - label: |
| "Step 16: TH waits for a report of InterconnectCOAlarm attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0009 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-coalarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0009 DataVersion: 1795725838 |
| [TOO] InterconnectCOAlarm: 1 |
| [1692347783.137318][2349:2351] CHIP:EM: <<< [E:27521i S:62929 M:152911121 (Ack:73193021)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 17: TH reads InterconnectCOAlarm event from DUT" |
| PICS: SMOKECO.S.A0009 && SMOKECO.S.E09 |
| command: "readEvent" |
| event: "InterconnectCOAlarm" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: { AlarmSeverityLevel: 1 } |
| |
| - label: "Step 18: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0009 && SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 8 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 19: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Interconnect CO Alarm Test Event |
| Clear" |
| PICS: SMOKECO.S.A0009 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_INTERCONNECT_CO_ALARM_CLEAR |
| |
| - label: |
| "Step 20: TH waits for a report of InterconnectCOAlarm attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0009 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read interconnect-coalarm 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0009 DataVersion: 1795725838 |
| [TOO] InterconnectCOAlarm: 0 |
| [1692347783.137318][2349:2351] CHIP:EM: <<< [E:27521i S:62929 M:152911121 (Ack:73193021)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 21: TH reads ExpressedState attribute from DUT" |
| PICS: SMOKECO.S.A0009 && SMOKECO.S.A0000 |
| command: "readAttribute" |
| attribute: "ExpressedState" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 22: TH reads AllClear event from DUT" |
| PICS: SMOKECO.S.A0009 && SMOKECO.S.E0a |
| command: "readEvent" |
| event: "AllClear" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 23: TH subscribes to ContaminationState attribute from DUT" |
| PICS: SMOKECO.S.A000a |
| command: "subscribeAttribute" |
| attribute: "ContaminationState" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 24: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Contamination State (High) Test |
| Event" |
| PICS: SMOKECO.S.A000a && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CONTAMINATION_STATE_HIGH |
| |
| - label: |
| "Step 25: TH waits for a report of ContaminationState attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000a |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read contamination-state 1 1 |
| |
| Verify that the value of ContaminationState is 2 or 3 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000A DataVersion: 1795725838 |
| [TOO] ContaminationState: 2 |
| [1692348096.518517][2379:2381] CHIP:EM: <<< [E:58566i S:46219 M:91979742 (Ack:78967986)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 26: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Contamination State Test Event |
| Clear" |
| PICS: SMOKECO.S.A000a && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TTEST_EVENT_TRIGGER_CONTAMINATION_STATE_CLEAR |
| |
| - label: |
| "Step 27: TH waits for a report of ContaminationState attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000a |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read contamination-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000A DataVersion: 1795725838 |
| [TOO] ContaminationState: 0 |
| [1692348096.518517][2379:2381] CHIP:EM: <<< [E:58566i S:46219 M:91979742 (Ack:78967986)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 28: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Contamination State (Low) Test |
| Event" |
| PICS: SMOKECO.S.A000a && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CONTAMINATION_STATE_LOW |
| |
| - label: |
| "Step 29: TH waits for a report of ContaminationState attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000a |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read contamination-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000A DataVersion: 1795725838 |
| [TOO] ContaminationState: 1 |
| [1692348096.518517][2379:2381] CHIP:EM: <<< [E:58566i S:46219 M:91979742 (Ack:78967986)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 30: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Contamination State Test Event |
| Clear" |
| PICS: SMOKECO.S.A000a && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TTEST_EVENT_TRIGGER_CONTAMINATION_STATE_CLEAR |
| |
| - label: |
| "Step 31: TH waits for a report of ContaminationState attribute from |
| DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000a |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read contamination-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000A DataVersion: 1795725838 |
| [TOO] ContaminationState: 0 |
| [1692348096.518517][2379:2381] CHIP:EM: <<< [E:58566i S:46219 M:91979742 (Ack:78967986)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 32: TH subscribes to SmokeSensitivityLevel attribute from DUT" |
| PICS: SMOKECO.S.A000b |
| command: "subscribeAttribute" |
| attribute: "SmokeSensitivityLevel" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 1 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 33: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Sensitivity Level (High) |
| Test Event" |
| PICS: SMOKECO.S.A000b && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_HIGH |
| |
| - label: |
| "Step 34: TH waits for a report of SmokeSensitivityLevel attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000b |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-sensitivity-level 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000B DataVersion: 1795725838 |
| [TOO] SmokeSensitivityLevel: 0 |
| [1692348402.151948][2411:2413] CHIP:EM: <<< [E:29308i S:32670 M:242614750 (Ack:166603333)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 35: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Sensitivity Level Test |
| Event Clear" |
| PICS: SMOKECO.S.A000b && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TTEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_CLEAR |
| |
| - label: |
| "Step 36: TH waits for a report of SmokeSensitivityLevel attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000b |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-sensitivity-level 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000B DataVersion: 1795725838 |
| [TOO] SmokeSensitivityLevel: 1 |
| [1692348402.151948][2411:2413] CHIP:EM: <<< [E:29308i S:32670 M:242614750 (Ack:166603333)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 37: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Sensitivity Level (Low) |
| Test Event" |
| PICS: SMOKECO.S.A000b && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_LOW |
| |
| - label: |
| "Step 38: TH waits for a report of SmokeSensitivityLevel attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000b |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-sensitivity-level 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000B DataVersion: 1795725838 |
| [TOO] SmokeSensitivityLevel: 2 |
| [1692348402.151948][2411:2413] CHIP:EM: <<< [E:29308i S:32670 M:242614750 (Ack:166603333)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 39: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Sensitivity Level Test |
| Event Clear" |
| PICS: SMOKECO.S.A000b && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TTEST_EVENT_TRIGGER_SENSITIVITY_LEVEL_CLEAR |
| |
| - label: |
| "Step 40: TH waits for a report of SmokeSensitivityLevel attribute |
| from DUT with a timeout of 300 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A000b |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-sensitivity-level 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_000B DataVersion: 1795725838 |
| [TOO] SmokeSensitivityLevel: 1 |
| [1692348402.151948][2411:2413] CHIP:EM: <<< [E:29308i S:32670 M:242614750 (Ack:166603333)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 41: TH subscribes to DeviceMuted attribute from DUT" |
| PICS: SMOKECO.S.A0004 |
| command: "subscribeAttribute" |
| attribute: "DeviceMuted" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 42: TH reads FeatureMap attribute(Smoke Alarm) from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x1] |
| |
| - label: "Step 43: TH subscribes to SmokeState attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && SMOKECO.S.A0001 |
| command: "subscribeAttribute" |
| attribute: "SmokeState" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 44: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning Smoke Alarm Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_WARNING_SMOKE_ALARM |
| |
| - label: |
| "Step 45: TH waits for a report of SmokeState attribute from DUT with |
| a timeout of 300 seconds" |
| PICS: |
| PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F00 && |
| SMOKECO.S.A0001 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838 |
| [TOO] SmokeState: 1 |
| [1692349339.825752][2459:2461] CHIP:EM: <<< [E:61294i S:49169 M:238949431 (Ack:140762876)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 46a: TH subscribes to DeviceMuted attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 |
| command: "subscribeAttribute" |
| attribute: "DeviceMuted" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 46n: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Manual Device Mute Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_DEVICE_MUTED |
| |
| - label: |
| "Step 47: TH waits for a report of DeviceMuted attribute from DUT with |
| a timeout of 120 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F00 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read device-muted 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0004 DataVersion: 1795725838 |
| [TOO] DeviceMuted: 1 |
| [1692349531.738337][2468:2470] CHIP:EM: <<< [E:36895i S:26369 M:202373918 (Ack:162425969)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 48: TH reads AlarmMuted event from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && SMOKECO.S.E06 |
| command: "readEvent" |
| event: "AlarmMuted" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: |
| "Step 49: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Manual Device Mute Test Event |
| Clear" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_DEVICE_MUTED_CLEAR |
| |
| - label: |
| "Step 50: TH waits for a report of DeviceMuted attribute from DUT with |
| a timeout of 120 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F00 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read device-muted 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0004 DataVersion: 1795725838 |
| [TOO] DeviceMuted: 0 |
| [1692349531.738337][2468:2470] CHIP:EM: <<< [E:36895i S:26369 M:202373918 (Ack:162425969)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 51: TH reads MuteEnded event from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && SMOKECO.S.E07 |
| command: "readEvent" |
| event: "MuteEnded" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 52a: TH subscribes to SmokeState attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && SMOKECO.S.A0001 |
| command: "subscribeAttribute" |
| attribute: "SmokeState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 52b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Critical Smoke Alarm Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CRITICAL_SMOKE_ALARM |
| |
| - label: |
| "Step 53: TH waits for a report of SmokeState attribute from DUT with |
| a timeout of 300 seconds" |
| PICS: |
| PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F00 && |
| SMOKECO.S.A0001 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838 |
| [TOO] SmokeState: 2 |
| [1692349914.493176][2494:2497] CHIP:EM: <<< [E:61720i S:1516 M:195353256 (Ack:30443186)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 54: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Manual Device Mute Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_DEVICE_MUTED |
| |
| - label: "Step 55a: TH waits 5 Seconds" |
| PICS: "!PICS_SDK_CI_ONLY" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 5000 |
| |
| - label: "Step 55b: TH reads DeviceMuted attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 |
| command: "readAttribute" |
| attribute: "DeviceMuted" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 56a: TH subscribes to SmokeState attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && SMOKECO.S.A0001 |
| command: "subscribeAttribute" |
| attribute: "SmokeState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 56b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Smoke Alarm Test Event Clear" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F00 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_SMOKE_ALARM_CLEAR |
| |
| - label: |
| "Step 57: TH waits for a report of SmokeState attribute from DUT with |
| a timeout of 300 seconds" |
| PICS: |
| PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F00 && |
| SMOKECO.S.A0001 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read smoke-state 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0001 DataVersion: 1795725838 |
| [TOO] SmokeState: 0 |
| [1692349914.493176][2494:2497] CHIP:EM: <<< [E:61720i S:1516 M:195353256 (Ack:30443186)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 58: TH reads FeatureMap attribute(CO Alarm) from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x2] |
| |
| - label: "Step 59: TH subscribes to COState attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && SMOKECO.S.A0002 |
| command: "subscribeAttribute" |
| attribute: "COState" |
| minInterval: 1 |
| maxInterval: 900 |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: |
| "Step 60: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Warning CO Alarm Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_WARNING_CO_ALARM |
| |
| - label: |
| "Step 61: TH waits for a report of COState attribute from DUT with a |
| timeout of 300 seconds" |
| PICS: |
| PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F01 && |
| SMOKECO.S.A0002 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read costate 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838 |
| [TOO] COState: 1 |
| [1692350209.108525][2516:2518] CHIP:DMG: MoveToState ReadClient[0xffffa0011050]: Moving to [AwaitingSu] |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 62a: TH subscribes to DeviceMuted attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 |
| command: "subscribeAttribute" |
| attribute: "DeviceMuted" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 62b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Manual Device Mute Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_DEVICE_MUTED |
| |
| - label: |
| "Step 63: TH waits for a report of DeviceMuted attribute from DUT with |
| a timeout of 120 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F01 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read device-muted 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0004 DataVersion: 1795725838 |
| [TOO] DeviceMuted: 1 |
| [1692349531.738337][2468:2470] CHIP:EM: <<< [E:36895i S:26369 M:202373918 (Ack:162425969)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 64: TH reads AlarmMuted event from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && SMOKECO.S.E06 |
| command: "readEvent" |
| event: "AlarmMuted" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: |
| "Step 65: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Manual Device Mute Test Event |
| Clear" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_DEVICE_MUTED_CLEAR |
| |
| - label: |
| "Step 66: TH waits for a report of DeviceMuted attribute from DUT with |
| a timeout of 120 seconds" |
| PICS: PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F01 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read device-muted 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0004 DataVersion: 1795725838 |
| [TOO] DeviceMuted: 0 |
| [1692349531.738337][2468:2470] CHIP:EM: <<< [E:36895i S:26369 M:202373918 (Ack:162425969)] (S) Msg TX to 1:0000000000000001 [D134] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 67: TH reads MuteEnded event from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && SMOKECO.S.E07 |
| command: "readEvent" |
| event: "MuteEnded" |
| eventNumber: "LastReceivedEventNumber + 1" |
| response: |
| value: {} |
| |
| - label: "Step 68a: TH subscribes to COState attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && SMOKECO.S.A0002 |
| command: "subscribeAttribute" |
| attribute: "COState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 68b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Critical CO Alarm Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CRITICAL_CO_ALARM |
| |
| - label: |
| "Step 69: TH waits for a report of COState attribute from DUT with a |
| timeout of 300 seconds" |
| PICS: |
| PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F01 && |
| SMOKECO.S.A0002 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read costate 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838 |
| [TOO] COState: 2 |
| [1692350209.108525][2516:2518] CHIP:DMG: MoveToState ReadClient[0xffffa0011050]: Moving to [AwaitingSu] |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Step 70: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for Manual Device Mute Test Event" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_DEVICE_MUTED |
| |
| - label: "Step 71a: TH waits 5 Seconds" |
| PICS: "!PICS_SDK_CI_ONLY" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 5000 |
| |
| - label: "Step 71b: TH reads DeviceMuted attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 |
| command: "readAttribute" |
| attribute: "DeviceMuted" |
| response: |
| value: 0 |
| constraints: |
| type: enum8 |
| |
| - label: "Step 72a: TH subscribes to COState attribute from DUT" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && SMOKECO.S.A0002 |
| command: "subscribeAttribute" |
| attribute: "COState" |
| minInterval: 1 |
| maxInterval: 900 |
| |
| - label: |
| "Step 72b: TH sends TestEventTrigger command to General Diagnostics |
| Cluster on Endpoint 0 with EnableKey field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER_KEY and EventTrigger field set to |
| PIXIT.SMOKECO.TEST_EVENT_TRIGGER for CO Alarm Test Event Clear" |
| PICS: SMOKECO.S.A0004 && SMOKECO.S.F01 && DGGEN.S.C00.Rsp |
| cluster: "General Diagnostics" |
| endpoint: 0 |
| command: "TestEventTrigger" |
| arguments: |
| values: |
| - name: "EnableKey" |
| value: TEST_EVENT_TRIGGER_KEY |
| - name: "EventTrigger" |
| value: TEST_EVENT_TRIGGER_CO_ALARM_CLEAR |
| |
| - label: |
| "Step 73: TH waits for a report of COState attribute from DUT with a |
| timeout of 300 seconds" |
| PICS: |
| PICS_SKIP_SAMPLE_APP && SMOKECO.S.A0004 && SMOKECO.S.F01 && |
| SMOKECO.S.A0002 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| verification: | |
| ./chip-tool smokecoalarm read costate 1 1 |
| |
| [TOO] Endpoint: 1 Cluster: 0x0000_005C Attribute 0x0000_0002 DataVersion: 1795725838 |
| [TOO] COState: 0 |
| [1692350209.108525][2516:2518] CHIP:DMG: MoveToState ReadClient[0xffffa0011050]: Moving to [AwaitingSu] |
| arguments: |
| values: |
| - name: "message" |
| value: "Enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
