php/src/Google/Protobuf/FieldMask.php

<?php
# Generated by the protocol buffer compiler.  DO NOT EDIT!
# source: google/protobuf/field_mask.proto

namespace Google\Protobuf;

use Google\Protobuf\Internal\GPBType;
use Google\Protobuf\Internal\RepeatedField;
use Google\Protobuf\Internal\GPBUtil;

/**
 * `FieldMask` represents a set of symbolic field paths, for example:
 *     paths: "f.a"
 *     paths: "f.b.d"
 * Here `f` represents a field in some root message, `a` and `b`
 * fields in the message found in `f`, and `d` a field found in the
 * message in `f.b`.
 * Field masks are used to specify a subset of fields that should be
 * returned by a get operation or modified by an update operation.
 * Field masks also have a custom JSON encoding (see below).
 * # Field Masks in Projections
 * When used in the context of a projection, a response message or
 * sub-message is filtered by the API to only contain those fields as
 * specified in the mask. For example, if the mask in the previous
 * example is applied to a response message as follows:
 *     f {
 *       a : 22
 *       b {
 *         d : 1
 *         x : 2
 *       }
 *       y : 13
 *     }
 *     z: 8
 * The result will not contain specific values for fields x,y and z
 * (their value will be set to the default, and omitted in proto text
 * output):
 *     f {
 *       a : 22
 *       b {
 *         d : 1
 *       }
 *     }
 * A repeated field is not allowed except at the last position of a
 * paths string.
 * If a FieldMask object is not present in a get operation, the
 * operation applies to all fields (as if a FieldMask of all fields
 * had been specified).
 * Note that a field mask does not necessarily apply to the
 * top-level response message. In case of a REST get operation, the
 * field mask applies directly to the response, but in case of a REST
 * list operation, the mask instead applies to each individual message
 * in the returned resource list. In case of a REST custom method,
 * other definitions may be used. Where the mask applies will be
 * clearly documented together with its declaration in the API.  In
 * any case, the effect on the returned resource/resources is required
 * behavior for APIs.
 * # Field Masks in Update Operations
 * A field mask in update operations specifies which fields of the
 * targeted resource are going to be updated. The API is required
 * to only change the values of the fields as specified in the mask
 * and leave the others untouched. If a resource is passed in to
 * describe the updated values, the API ignores the values of all
 * fields not covered by the mask.
 * If a repeated field is specified for an update operation, new values will
 * be appended to the existing repeated field in the target resource. Note that
 * a repeated field is only allowed in the last position of a `paths` string.
 * If a sub-message is specified in the last position of the field mask for an
 * update operation, then new value will be merged into the existing sub-message
 * in the target resource.
 * For example, given the target message:
 *     f {
 *       b {
 *         d: 1
 *         x: 2
 *       }
 *       c: [1]
 *     }
 * And an update message:
 *     f {
 *       b {
 *         d: 10
 *       }
 *       c: [2]
 *     }
 * then if the field mask is:
 *  paths: ["f.b", "f.c"]
 * then the result will be:
 *     f {
 *       b {
 *         d: 10
 *         x: 2
 *       }
 *       c: [1, 2]
 *     }
 * An implementation may provide options to override this default behavior for
 * repeated and message fields.
 * In order to reset a field's value to the default, the field must
 * be in the mask and set to the default value in the provided resource.
 * Hence, in order to reset all fields of a resource, provide a default
 * instance of the resource and set all fields in the mask, or do
 * not provide a mask as described below.
 * If a field mask is not present on update, the operation applies to
 * all fields (as if a field mask of all fields has been specified).
 * Note that in the presence of schema evolution, this may mean that
 * fields the client does not know and has therefore not filled into
 * the request will be reset to their default. If this is unwanted
 * behavior, a specific service may require a client to always specify
 * a field mask, producing an error if not.
 * As with get operations, the location of the resource which
 * describes the updated values in the request message depends on the
 * operation kind. In any case, the effect of the field mask is
 * required to be honored by the API.
 * ## Considerations for HTTP REST
 * The HTTP kind of an update operation which uses a field mask must
 * be set to PATCH instead of PUT in order to satisfy HTTP semantics
 * (PUT must only be used for full updates).
 * # JSON Encoding of Field Masks
 * In JSON, a field mask is encoded as a single string where paths are
 * separated by a comma. Fields name in each path are converted
 * to/from lower-camel naming conventions.
 * As an example, consider the following message declarations:
 *     message Profile {
 *       User user = 1;
 *       Photo photo = 2;
 *     }
 *     message User {
 *       string display_name = 1;
 *       string address = 2;
 *     }
 * In proto a field mask for `Profile` may look as such:
 *     mask {
 *       paths: "user.display_name"
 *       paths: "photo"
 *     }
 * In JSON, the same mask is represented as below:
 *     {
 *       mask: "user.displayName,photo"
 *     }
 * # Field Masks and Oneof Fields
 * Field masks treat fields in oneofs just as regular fields. Consider the
 * following message:
 *     message SampleMessage {
 *       oneof test_oneof {
 *         string name = 4;
 *         SubMessage sub_message = 9;
 *       }
 *     }
 * The field mask can be:
 *     mask {
 *       paths: "name"
 *     }
 * Or:
 *     mask {
 *       paths: "sub_message"
 *     }
 * Note that oneof type names ("test_oneof" in this case) cannot be used in
 * paths.
 * ## Field Mask Verification
 * The implementation of any API method which has a FieldMask type field in the
 * request should verify the included field paths, and return an
 * `INVALID_ARGUMENT` error if any path is unmappable.
 *
 * Generated from protobuf message <code>google.protobuf.FieldMask</code>
 */
class FieldMask extends \Google\Protobuf\Internal\Message
{
    /**
     * The set of field mask paths.
     *
     * Generated from protobuf field <code>repeated string paths = 1;</code>
     */
    private $paths;

    /**
     * Constructor.
     *
     * @param array $data {
     *     Optional. Data for populating the Message object.
     *
     *     @type array<string>|\Google\Protobuf\Internal\RepeatedField $paths
     *           The set of field mask paths.
     * }
     */
    public function __construct($data = NULL) {
        \GPBMetadata\Google\Protobuf\FieldMask::initOnce();
        parent::__construct($data);
    }

    /**
     * The set of field mask paths.
     *
     * Generated from protobuf field <code>repeated string paths = 1;</code>
     * @return \Google\Protobuf\Internal\RepeatedField
     */
    public function getPaths()
    {
        return $this->paths;
    }

    /**
     * The set of field mask paths.
     *
     * Generated from protobuf field <code>repeated string paths = 1;</code>
     * @param array<string>|\Google\Protobuf\Internal\RepeatedField $var
     * @return $this
     */
    public function setPaths($var)
    {
        $arr = GPBUtil::checkRepeatedField($var, \Google\Protobuf\Internal\GPBType::STRING);
        $this->paths = $arr;

        return $this;
    }

}