| // THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT |
| |
| /* |
| * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef _HARDWARE_STRUCTS_PADSBANK0_H |
| #define _HARDWARE_STRUCTS_PADSBANK0_H |
| |
| #include "hardware/address_mapped.h" |
| #include "hardware/regs/pads_bank0.h" |
| |
| // Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pads_bank0 |
| // |
| // The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) |
| // _REG_(x) will link to the corresponding register in hardware/regs/pads_bank0.h. |
| // |
| // Bit-field descriptions are of the form: |
| // BITMASK [BITRANGE]: FIELDNAME (RESETVALUE): DESCRIPTION |
| |
| typedef struct { |
| _REG_(PADS_BANK0_VOLTAGE_SELECT_OFFSET) // PADS_BANK0_VOLTAGE_SELECT |
| // Voltage select |
| // 0x00000001 [0] : VOLTAGE_SELECT (0) |
| io_rw_32 voltage_select; |
| |
| _REG_(PADS_BANK0_GPIO0_OFFSET) // PADS_BANK0_GPIO0 |
| // (Description copied from array index 0 register PADS_BANK0_GPIO0 applies similarly to other array indexes) |
| // |
| // Pad control register |
| // 0x00000080 [7] : OD (0): Output disable |
| // 0x00000040 [6] : IE (1): Input enable |
| // 0x00000030 [5:4] : DRIVE (1): Drive strength |
| // 0x00000008 [3] : PUE (0): Pull up enable |
| // 0x00000004 [2] : PDE (1): Pull down enable |
| // 0x00000002 [1] : SCHMITT (1): Enable schmitt trigger |
| // 0x00000001 [0] : SLEWFAST (0): Slew rate control |
| io_rw_32 io[NUM_BANK0_GPIOS]; // 30 |
| } padsbank0_hw_t; |
| |
| #define padsbank0_hw ((padsbank0_hw_t *)PADS_BANK0_BASE) |
| |
| static_assert( NUM_BANK0_GPIOS == 30, ""); |
| |
| #endif |