blob: 554d9e4470a43cbf8a500b0bd939d3ae90582a63 [file] [log] [blame]
// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT
/*
* Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H
#define _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H
#include "hardware/address_mapped.h"
#include "hardware/regs/vreg_and_chip_reset.h"
// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_vreg_and_chip_reset
//
// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
// _REG_(x) will link to the corresponding register in hardware/regs/vreg_and_chip_reset.h.
//
// Bit-field descriptions are of the form:
// BITMASK [BITRANGE]: FIELDNAME (RESETVALUE): DESCRIPTION
typedef struct {
_REG_(VREG_AND_CHIP_RESET_VREG_OFFSET) // VREG_AND_CHIP_RESET_VREG
// Voltage regulator control and status
// 0x00001000 [12] : ROK (0): regulation status
// 0x000000f0 [7:4] : VSEL (0xb): output voltage select
// 0x00000002 [1] : HIZ (0): high impedance mode select
// 0x00000001 [0] : EN (1): enable
io_rw_32 vreg;
_REG_(VREG_AND_CHIP_RESET_BOD_OFFSET) // VREG_AND_CHIP_RESET_BOD
// brown-out detection control
// 0x000000f0 [7:4] : VSEL (0x9): threshold select
// 0x00000001 [0] : EN (1): enable
io_rw_32 bod;
_REG_(VREG_AND_CHIP_RESET_CHIP_RESET_OFFSET) // VREG_AND_CHIP_RESET_CHIP_RESET
// Chip reset control and status
// 0x01000000 [24] : PSM_RESTART_FLAG (0): This is set by psm_restart from the debugger
// 0x00100000 [20] : HAD_PSM_RESTART (0): Last reset was from the debug port
// 0x00010000 [16] : HAD_RUN (0): Last reset was from the RUN pin
// 0x00000100 [8] : HAD_POR (0): Last reset was from the power-on reset or brown-out detection blocks
io_rw_32 chip_reset;
} vreg_and_chip_reset_hw_t;
#define vreg_and_chip_reset_hw ((vreg_and_chip_reset_hw_t *const)VREG_AND_CHIP_RESET_BASE)
#endif