blob: 77e67c7b5ab263f038218afe9d19830d3074400a [file] [log] [blame]
/*
* Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <cstdio>
#include <map>
#include <set>
#include <vector>
#include <cstring>
#include <cstdarg>
#include <algorithm>
#include "boot/uf2.h"
#include "elf.h"
typedef unsigned int uint;
#define ERROR_ARGS -1
#define ERROR_FORMAT -2
#define ERROR_INCOMPATIBLE -3
#define ERROR_READ_FAILED -4
#define ERROR_WRITE_FAILED -5
#define FLASH_SECTOR_ERASE_SIZE 4096u
static char error_msg[512];
static bool verbose;
static int fail(int code, const char *format, ...) {
va_list args;
va_start(args, format);
vsnprintf(error_msg, sizeof(error_msg), format, args);
va_end(args);
return code;
}
static int fail_read_error() {
return fail(ERROR_READ_FAILED, "Failed to read input file");
}
static int fail_write_error() {
return fail(ERROR_WRITE_FAILED, "Failed to write output file");
}
// we require 256 (as this is the page size supported by the device)
#define LOG2_PAGE_SIZE 8u
#define PAGE_SIZE (1u << LOG2_PAGE_SIZE)
struct address_range {
enum type {
CONTENTS, // may have contents
NO_CONTENTS, // must be uninitialized
IGNORE // will be ignored
};
address_range(uint32_t from, uint32_t to, type type) : from(from), to(to), type(type) {}
address_range() : address_range(0, 0, IGNORE) {}
type type;
uint32_t to;
uint32_t from;
};
typedef std::vector<address_range> address_ranges;
#define MAIN_RAM_START 0x20000000u // same as SRAM_BASE in addressmap.h
#define MAIN_RAM_END 0x20042000u // same as SRAM_END in addressmap.h
#define FLASH_START 0x10000000u // same as XIP_MAIN_BASE in addressmap.h
#define FLASH_END 0x15000000u
#define XIP_SRAM_START 0x15000000u // same as XIP_SRAM_BASE in addressmap.h
#define XIP_SRAM_END 0x15004000u // same as XIP_SRAM_END in addressmap.h
#define MAIN_RAM_BANKED_START 0x21000000u // same as SRAM0_BASE in addressmap.h
#define MAIN_RAM_BANKED_END 0x21040000u
#define ROM_START 0x00000000u // same as ROM_BASE in addressmap.h
#define ROM_END 0x00004000u
const address_ranges rp2040_address_ranges_flash {
address_range(FLASH_START, FLASH_END, address_range::type::CONTENTS),
address_range(MAIN_RAM_START, MAIN_RAM_END, address_range::type::NO_CONTENTS),
address_range(MAIN_RAM_BANKED_START, MAIN_RAM_BANKED_END, address_range::type::NO_CONTENTS)
};
const address_ranges rp2040_address_ranges_ram {
address_range(MAIN_RAM_START, MAIN_RAM_END, address_range::type::CONTENTS),
address_range(XIP_SRAM_START, XIP_SRAM_END, address_range::type::CONTENTS),
address_range(ROM_START, ROM_END, address_range::type::IGNORE) // for now we ignore the bootrom if present
};
struct page_fragment {
page_fragment(uint32_t file_offset, uint32_t page_offset, uint32_t bytes) : file_offset(file_offset), page_offset(page_offset), bytes(bytes) {}
uint32_t file_offset;
uint32_t page_offset;
uint32_t bytes;
};
static int usage() {
fprintf(stderr, "Usage: elf2uf2 (-v) <input ELF file> <output UF2 file>\n");
return ERROR_ARGS;
}
static int read_and_check_elf32_header(FILE *in, elf32_header& eh_out) {
if (1 != fread(&eh_out, sizeof(eh_out), 1, in)) {
return fail(ERROR_READ_FAILED, "Unable to read ELF header");
}
if (eh_out.common.magic != ELF_MAGIC) {
return fail(ERROR_FORMAT, "Not an ELF file");
}
if (eh_out.common.version != 1 || eh_out.common.version2 != 1) {
return fail(ERROR_FORMAT, "Unrecognized ELF version");
}
if (eh_out.common.arch_class != 1 || eh_out.common.endianness != 1) {
return fail(ERROR_INCOMPATIBLE, "Require 32 bit little-endian ELF");
}
if (eh_out.eh_size != sizeof(struct elf32_header)) {
return fail(ERROR_FORMAT, "Invalid ELF32 format");
}
if (eh_out.common.machine != EM_ARM) {
return fail(ERROR_FORMAT, "Not an ARM executable");
}
if (eh_out.common.abi != 0) {
return fail(ERROR_INCOMPATIBLE, "Unrecognized ABI");
}
if (eh_out.flags & EF_ARM_ABI_FLOAT_HARD) {
return fail(ERROR_INCOMPATIBLE, "HARD-FLOAT not supported");
}
return 0;
}
int check_address_range(const address_ranges& valid_ranges, uint32_t addr, uint32_t vaddr, uint32_t size, bool uninitialized, address_range &ar) {
for(const auto& range : valid_ranges) {
if (range.from <= addr && range.to >= addr + size) {
if (range.type == address_range::type::NO_CONTENTS && !uninitialized) {
return fail(ERROR_INCOMPATIBLE, "ELF contains memory contents for uninitialized memory");
}
ar = range;
if (verbose) {
printf("%s segment %08x->%08x (%08x->%08x)\n", uninitialized ? "Uninitialized" : "Mapped", addr,
addr + size, vaddr, vaddr+size);
}
return 0;
}
}
return fail(ERROR_INCOMPATIBLE, "Memory segment %08x->%08x is outside of valid address range for device", addr, addr+size);
}
int read_and_check_elf32_ph_entries(FILE *in, const elf32_header &eh, const address_ranges& valid_ranges, std::map<uint32_t, std::vector<page_fragment>>& pages) {
if (eh.ph_entry_size != sizeof(elf32_ph_entry)) {
return fail(ERROR_FORMAT, "Invalid ELF32 program header");
}
if (eh.ph_num) {
std::vector<elf32_ph_entry> entries(eh.ph_num);
if (fseek(in, eh.ph_offset, SEEK_SET)) {
return fail_read_error();
}
if (eh.ph_num != fread(&entries[0], sizeof(struct elf32_ph_entry), eh.ph_num, in)) {
return fail_read_error();
}
for(uint i=0;i<eh.ph_num;i++) {
elf32_ph_entry& entry = entries[i];
if (entry.type == PT_LOAD && entry.memsz) {
address_range ar;
int rc;
uint mapped_size = std::min(entry.filez, entry.memsz);
if (mapped_size) {
rc = check_address_range(valid_ranges, entry.paddr, entry.vaddr, mapped_size, false, ar);
if (rc) return rc;
// we don't download uninitialized, generally it is BSS and should be zero-ed by crt0.S, or it may be COPY areas which are undefined
if (ar.type != address_range::type::CONTENTS) {
if (verbose) printf(" ignored\n");
continue;
}
uint addr = entry.paddr;
uint remaining = mapped_size;
uint file_offset = entry.offset;
while (remaining) {
uint off = addr & (PAGE_SIZE - 1);
uint len = std::min(remaining, PAGE_SIZE - off);
auto &fragments = pages[addr - off]; // list of fragments
// note if filesz is zero, we want zero init which is handled because the
// statement above creates an empty page fragment list
// check overlap with any existing fragments
for (const auto &fragment : fragments) {
if ((off < fragment.page_offset + fragment.bytes) !=
((off + len) <= fragment.page_offset)) {
fail(ERROR_FORMAT, "In memory segments overlap");
}
}
fragments.push_back(
page_fragment{file_offset,off,len});
addr += len;
file_offset += len;
remaining -= len;
}
}
if (entry.memsz > entry.filez) {
// we have some uninitialized data too
rc = check_address_range(valid_ranges, entry.paddr + entry.filez, entry.vaddr + entry.filez, entry.memsz - entry.filez, true,
ar);
if (rc) return rc;
}
}
}
}
return 0;
}
int realize_page(FILE *in, const std::vector<page_fragment> &fragments, uint8_t *buf, uint buf_len) {
assert(buf_len >= PAGE_SIZE);
for(auto& frag : fragments) {
assert(frag.page_offset >= 0 && frag.page_offset < PAGE_SIZE && frag.page_offset + frag.bytes <= PAGE_SIZE);
if (fseek(in, frag.file_offset, SEEK_SET)) {
return fail_read_error();
}
if (1 != fread(buf + frag.page_offset, frag.bytes, 1, in)) {
return fail_read_error();
}
}
return 0;
}
static bool is_address_valid(const address_ranges& valid_ranges, uint32_t addr) {
for(const auto& range : valid_ranges) {
if (range.from <= addr && range.to > addr) {
return true;
}
}
return false;
}
static bool is_address_initialized(const address_ranges& valid_ranges, uint32_t addr) {
for(const auto& range : valid_ranges) {
if (range.from <= addr && range.to > addr) {
return address_range::type::CONTENTS == range.type;
}
}
return false;
}
static bool is_address_mapped(const std::map<uint32_t, std::vector<page_fragment>>& pages, uint32_t addr) {
uint32_t page = addr & ~(PAGE_SIZE - 1);
if (!pages.count(page)) return false;
// todo check actual address within page
return true;
}
int elf2uf2(FILE *in, FILE *out) {
elf32_header eh;
std::map<uint32_t, std::vector<page_fragment>> pages;
int rc = read_and_check_elf32_header(in, eh);
bool ram_style = false;
address_ranges valid_ranges = {};
if (!rc) {
ram_style = is_address_initialized(rp2040_address_ranges_ram, eh.entry);
if (verbose) {
if (ram_style) {
printf("Detected RAM binary\n");
} else {
printf("Detected FLASH binary\n");
}
}
valid_ranges = ram_style ? rp2040_address_ranges_ram : rp2040_address_ranges_flash;
rc = read_and_check_elf32_ph_entries(in, eh, valid_ranges, pages);
}
if (rc) return rc;
if (pages.empty()) {
return fail(ERROR_INCOMPATIBLE, "The input file has no memory pages");
}
uint page_num = 0;
if (ram_style) {
uint32_t expected_ep_main_ram = UINT32_MAX;
uint32_t expected_ep_xip_sram = UINT32_MAX;
for(auto& page_entry : pages) {
if ( ((page_entry.first >= MAIN_RAM_START) && (page_entry.first < MAIN_RAM_END)) && (page_entry.first < expected_ep_main_ram) ) {
expected_ep_main_ram = page_entry.first | 0x1;
} else if ( ((page_entry.first >= XIP_SRAM_START) && (page_entry.first < XIP_SRAM_END)) && (page_entry.first < expected_ep_xip_sram) ) {
expected_ep_xip_sram = page_entry.first | 0x1;
}
}
uint32_t expected_ep = (UINT32_MAX != expected_ep_main_ram) ? expected_ep_main_ram : expected_ep_xip_sram;
if (eh.entry == expected_ep_xip_sram) {
return fail(ERROR_INCOMPATIBLE, "B0/B1 Boot ROM does not support direct entry into XIP_SRAM\n");
} else if (eh.entry != expected_ep) {
return fail(ERROR_INCOMPATIBLE, "A RAM binary should have an entry point at the beginning: %08x (not %08x)\n", expected_ep, eh.entry);
}
static_assert(0 == (MAIN_RAM_START & (PAGE_SIZE - 1)), "");
// currently don't require this as entry point is now at the start, we don't know where reset vector is
#if 0
uint8_t buf[PAGE_SIZE];
rc = realize_page(in, pages[MAIN_RAM_START], buf, sizeof(buf));
if (rc) return rc;
uint32_t sp = ((uint32_t *)buf)[0];
uint32_t ip = ((uint32_t *)buf)[1];
if (!is_address_mapped(pages, ip)) {
return fail(ERROR_INCOMPATIBLE, "Vector table at %08x is invalid: reset vector %08x is not in mapped memory",
MAIN_RAM_START, ip);
}
if (!is_address_valid(valid_ranges, sp - 4)) {
return fail(ERROR_INCOMPATIBLE, "Vector table at %08x is invalid: stack pointer %08x is not in RAM",
MAIN_RAM_START, sp);
}
#endif
} else {
// Fill in empty dummy uf2 pages to align the binary to flash sectors (except for the last sector which we don't
// need to pad, and choose not to to avoid making all SDK UF2s bigger)
// That workaround is required because the bootrom uses the block number for erase sector calculations:
// https://github.com/raspberrypi/pico-bootrom/blob/c09c7f08550e8a36fc38dc74f8873b9576de99eb/bootrom/virtual_disk.c#L205
std::set<uint32_t> touched_sectors;
for (auto& page_entry : pages) {
uint32_t sector = page_entry.first / FLASH_SECTOR_ERASE_SIZE;
touched_sectors.insert(sector);
}
uint32_t last_page = pages.rbegin()->first;
for (uint32_t sector : touched_sectors) {
for (uint32_t page = sector * FLASH_SECTOR_ERASE_SIZE; page < (sector + 1) * FLASH_SECTOR_ERASE_SIZE; page += PAGE_SIZE) {
if (page < last_page) {
// Create a dummy page, if it does not exist yet. note that all present pages are first
// zeroed before they are filled with any contents, so a dummy page will be all zeros.
auto &dummy = pages[page];
}
}
}
}
uf2_block block;
block.magic_start0 = UF2_MAGIC_START0;
block.magic_start1 = UF2_MAGIC_START1;
block.flags = UF2_FLAG_FAMILY_ID_PRESENT;
block.payload_size = PAGE_SIZE;
block.num_blocks = (uint32_t)pages.size();
block.file_size = RP2040_FAMILY_ID;
block.magic_end = UF2_MAGIC_END;
for(auto& page_entry : pages) {
block.target_addr = page_entry.first;
block.block_no = page_num++;
if (verbose) {
printf("Page %d / %d %08x%s\n", block.block_no, block.num_blocks, block.target_addr,
page_entry.second.empty() ? " (padding)": "");
}
memset(block.data, 0, sizeof(block.data));
rc = realize_page(in, page_entry.second, block.data, sizeof(block.data));
if (rc) return rc;
if (1 != fwrite(&block, sizeof(uf2_block), 1, out)) {
return fail_write_error();
}
}
return 0;
}
int main(int argc, char **argv) {
int arg = 1;
if (arg < argc && !strcmp(argv[arg], "-v")) {
verbose = true;
arg++;
}
if (argc < arg + 2) {
return usage();
}
const char *in_filename = argv[arg++];
FILE *in = fopen(in_filename, "rb");
if (!in) {
fprintf(stderr, "Can't open input file '%s'\n", in_filename);
return ERROR_ARGS;
}
const char *out_filename = argv[arg++];
FILE *out = fopen(out_filename, "wb");
if (!out) {
fprintf(stderr, "Can't open output file '%s'\n", out_filename);
return ERROR_ARGS;
}
int rc = elf2uf2(in, out);
fclose(in);
fclose(out);
if (rc) {
remove(out_filename);
if (error_msg[0]) {
fprintf(stderr, "ERROR: %s\n", error_msg);
}
}
return rc;
}