| /* |
| * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| // ----------------------------------------------------- |
| // NOTE: THIS HEADER IS ALSO INCLUDED BY ASSEMBLER SO |
| // SHOULD ONLY CONSIST OF PREPROCESSOR DIRECTIVES |
| // ----------------------------------------------------- |
| |
| #ifndef _BOARDS_PIMORONI_PICOSYSTEM_H |
| #define _BOARDS_PIMORONI_PICOSYSTEM_H |
| |
| // For board detection |
| #define PIMORONI_PICOSYSTEM |
| |
| // --- BOARD SPECIFIC --- |
| #define PICOSYSTEM_VBUS_DETECT_PIN 2 |
| |
| #define PICOSYSTEM_LCD_SPI 0 |
| #define PICOSYSTEM_LCD_RESET_PIN 4 |
| #define PICOSYSTEM_LCD_CSN_PIN 5 |
| #define PICOSYSTEM_LCD_SCLK_PIN 6 |
| #define PICOSYSTEM_LCD_MOSI_PIN 7 |
| #define PICOSYSTEM_LCD_VSYNC_PIN 8 |
| #define PICOSYSTEM_LCD_DC_PIN 9 |
| |
| #define PICOSYSTEM_AUDIO_PIN 11 |
| |
| #define PICOSYSTEM_BACKLIGHT_PIN 12 |
| |
| #define PICOSYSTEM_LED_G_PIN 13 |
| #define PICOSYSTEM_LED_R_PIN 14 |
| #define PICOSYSTEM_LED_B_PIN 15 |
| |
| #define PICOSYSTEM_SW_Y_PIN 16 |
| #define PICOSYSTEM_SW_X_PIN 17 |
| #define PICOSYSTEM_SW_A_PIN 18 |
| #define PICOSYSTEM_SW_B_PIN 19 |
| #define PICOSYSTEM_SW_DOWN_PIN 20 |
| #define PICOSYSTEM_SW_RIGHT_PIN 21 |
| #define PICOSYSTEM_SW_LEFT_PIN 22 |
| #define PICOSYSTEM_SW_UP_PIN 23 |
| |
| #define PICOSYSTEM_CHARGE_STAT_PIN 24 |
| #define PICOSYSTEM_BAT_SENSE_PIN 26 |
| |
| // --- UART --- |
| #ifndef PICO_DEFAULT_UART |
| #define PICO_DEFAULT_UART 0 |
| #endif |
| |
| #ifndef PICO_DEFAULT_UART_TX_PIN |
| #define PICO_DEFAULT_UART_TX_PIN 0 |
| #endif |
| |
| #ifndef PICO_DEFAULT_UART_RX_PIN |
| #define PICO_DEFAULT_UART_RX_PIN 1 |
| #endif |
| |
| // --- LED --- |
| // Included so basic examples will work, and set it to the green LED |
| #ifndef PICO_DEFAULT_LED_PIN |
| #define PICO_DEFAULT_LED_PIN PICOSYSTEM_LED_G_PIN |
| #endif |
| // no PICO_DEFAULT_WS2812_PIN |
| |
| #ifndef PICO_DEFAULT_LED_PIN_INVERTED |
| #define PICO_DEFAULT_LED_PIN_INVERTED 1 |
| #endif |
| |
| // --- I2C --- |
| //no PICO_DEFAULT_I2C |
| //no PICO_DEFAULT_I2C_SDA_PIN |
| //no PICO_DEFAULT_I2C_SCL_PIN |
| |
| // --- SPI --- |
| // no PICO_DEFAULT_SPI |
| // no PICO_DEFAULT_SPI_SCK_PIN |
| // no PICO_DEFAULT_SPI_TX_PIN |
| // no PICO_DEFAULT_SPI_RX_PIN |
| // no PICO_DEFAULT_SPI_CSN_PIN |
| |
| // --- FLASH --- |
| #define PICO_BOOT_STAGE2_CHOOSE_W25Q080 1 |
| |
| #ifndef PICO_FLASH_SPI_CLKDIV |
| #define PICO_FLASH_SPI_CLKDIV 2 |
| #endif |
| |
| #ifndef PICO_FLASH_SIZE_BYTES |
| #define PICO_FLASH_SIZE_BYTES (16 * 1024 * 1024) |
| #endif |
| |
| // All boards have B1 RP2040 |
| #ifndef PICO_RP2040_B0_SUPPORTED |
| #define PICO_RP2040_B0_SUPPORTED 0 |
| #endif |
| |
| #endif |
