blob: 970f0bf06e5bba101d5bd97f7418bb187e78d6e6 [file] [log] [blame]
/*
* Copyright (c) 2020 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include "hardware/flash.h"
#include "pico/bootrom.h"
#include "hardware/structs/ssi.h"
#include "hardware/structs/ioqspi.h"
#define FLASH_BLOCK_ERASE_CMD 0xd8
// Standard RUID instruction: 4Bh command prefix, 32 dummy bits, 64 data bits.
#define FLASH_RUID_CMD 0x4b
#define FLASH_RUID_DUMMY_BYTES 4
#define FLASH_RUID_DATA_BYTES 8
#define FLASH_RUID_TOTAL_BYTES (1 + FLASH_RUID_DUMMY_BYTES + FLASH_RUID_DATA_BYTES)
//-----------------------------------------------------------------------------
// Infrastructure for reentering XIP mode after exiting for programming (take
// a copy of boot2 before XIP exit). Calling boot2 as a function works because
// it accepts a return vector in LR (and doesn't trash r4-r7). Bootrom passes
// NULL in LR, instructing boot2 to enter flash vector table's reset handler.
#if !PICO_NO_FLASH
#define BOOT2_SIZE_WORDS 64
static uint32_t boot2_copyout[BOOT2_SIZE_WORDS];
static bool boot2_copyout_valid = false;
static void __no_inline_not_in_flash_func(flash_init_boot2_copyout)(void) {
if (boot2_copyout_valid)
return;
for (int i = 0; i < BOOT2_SIZE_WORDS; ++i)
boot2_copyout[i] = ((uint32_t *)XIP_BASE)[i];
__compiler_memory_barrier();
boot2_copyout_valid = true;
}
static void __no_inline_not_in_flash_func(flash_enable_xip_via_boot2)(void) {
((void (*)(void))((intptr_t)boot2_copyout+1))();
}
#else
static void __no_inline_not_in_flash_func(flash_init_boot2_copyout)(void) {}
static void __no_inline_not_in_flash_func(flash_enable_xip_via_boot2)(void) {
// Set up XIP for 03h read on bus access (slow but generic)
rom_flash_enter_cmd_xip_fn flash_enter_cmd_xip = (rom_flash_enter_cmd_xip_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_ENTER_CMD_XIP);
assert(flash_enter_cmd_xip);
flash_enter_cmd_xip();
}
#endif
//-----------------------------------------------------------------------------
// Actual flash programming shims (work whether or not PICO_NO_FLASH==1)
void __no_inline_not_in_flash_func(flash_range_erase)(uint32_t flash_offs, size_t count) {
#ifdef PICO_FLASH_SIZE_BYTES
hard_assert(flash_offs + count <= PICO_FLASH_SIZE_BYTES);
#endif
invalid_params_if(FLASH, flash_offs & (FLASH_SECTOR_SIZE - 1));
invalid_params_if(FLASH, count & (FLASH_SECTOR_SIZE - 1));
rom_connect_internal_flash_fn connect_internal_flash = (rom_connect_internal_flash_fn)rom_func_lookup_inline(ROM_FUNC_CONNECT_INTERNAL_FLASH);
rom_flash_exit_xip_fn flash_exit_xip = (rom_flash_exit_xip_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_EXIT_XIP);
rom_flash_range_erase_fn flash_range_erase = (rom_flash_range_erase_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_RANGE_ERASE);
rom_flash_flush_cache_fn flash_flush_cache = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE);
assert(connect_internal_flash && flash_exit_xip && flash_range_erase && flash_flush_cache);
flash_init_boot2_copyout();
// No flash accesses after this point
__compiler_memory_barrier();
connect_internal_flash();
flash_exit_xip();
flash_range_erase(flash_offs, count, FLASH_BLOCK_SIZE, FLASH_BLOCK_ERASE_CMD);
flash_flush_cache(); // Note this is needed to remove CSn IO force as well as cache flushing
flash_enable_xip_via_boot2();
}
void __no_inline_not_in_flash_func(flash_range_program)(uint32_t flash_offs, const uint8_t *data, size_t count) {
#ifdef PICO_FLASH_SIZE_BYTES
hard_assert(flash_offs + count <= PICO_FLASH_SIZE_BYTES);
#endif
invalid_params_if(FLASH, flash_offs & (FLASH_PAGE_SIZE - 1));
invalid_params_if(FLASH, count & (FLASH_PAGE_SIZE - 1));
rom_connect_internal_flash_fn connect_internal_flash = (rom_connect_internal_flash_fn)rom_func_lookup_inline(ROM_FUNC_CONNECT_INTERNAL_FLASH);
rom_flash_exit_xip_fn flash_exit_xip = (rom_flash_exit_xip_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_EXIT_XIP);
rom_flash_range_program_fn flash_range_program = (rom_flash_range_program_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_RANGE_PROGRAM);
rom_flash_flush_cache_fn flash_flush_cache = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE);
assert(connect_internal_flash && flash_exit_xip && flash_range_program && flash_flush_cache);
flash_init_boot2_copyout();
__compiler_memory_barrier();
connect_internal_flash();
flash_exit_xip();
flash_range_program(flash_offs, data, count);
flash_flush_cache(); // Note this is needed to remove CSn IO force as well as cache flushing
flash_enable_xip_via_boot2();
}
//-----------------------------------------------------------------------------
// Lower-level flash access functions
#if !PICO_NO_FLASH
// Bitbanging the chip select using IO overrides, in case RAM-resident IRQs
// are still running, and the FIFO bottoms out. (the bootrom does the same)
static void __no_inline_not_in_flash_func(flash_cs_force)(bool high) {
uint32_t field_val = high ?
IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_HIGH :
IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_LOW;
hw_write_masked(&ioqspi_hw->io[1].ctrl,
field_val << IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_LSB,
IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_BITS
);
}
void __no_inline_not_in_flash_func(flash_do_cmd)(const uint8_t *txbuf, uint8_t *rxbuf, size_t count) {
rom_connect_internal_flash_fn connect_internal_flash = (rom_connect_internal_flash_fn)rom_func_lookup_inline(ROM_FUNC_CONNECT_INTERNAL_FLASH);
rom_flash_exit_xip_fn flash_exit_xip = (rom_flash_exit_xip_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_EXIT_XIP);
rom_flash_flush_cache_fn flash_flush_cache = (rom_flash_flush_cache_fn)rom_func_lookup_inline(ROM_FUNC_FLASH_FLUSH_CACHE);
assert(connect_internal_flash && flash_exit_xip && flash_flush_cache);
flash_init_boot2_copyout();
__compiler_memory_barrier();
connect_internal_flash();
flash_exit_xip();
flash_cs_force(0);
size_t tx_remaining = count;
size_t rx_remaining = count;
// We may be interrupted -- don't want FIFO to overflow if we're distracted.
const size_t max_in_flight = 16 - 2;
while (tx_remaining || rx_remaining) {
uint32_t flags = ssi_hw->sr;
bool can_put = !!(flags & SSI_SR_TFNF_BITS);
bool can_get = !!(flags & SSI_SR_RFNE_BITS);
if (can_put && tx_remaining && rx_remaining - tx_remaining < max_in_flight) {
ssi_hw->dr0 = *txbuf++;
--tx_remaining;
}
if (can_get && rx_remaining) {
*rxbuf++ = (uint8_t)ssi_hw->dr0;
--rx_remaining;
}
}
flash_cs_force(1);
flash_flush_cache();
flash_enable_xip_via_boot2();
}
#endif
// Use standard RUID command to get a unique identifier for the flash (and
// hence the board)
static_assert(FLASH_UNIQUE_ID_SIZE_BYTES == FLASH_RUID_DATA_BYTES, "");
void flash_get_unique_id(uint8_t *id_out) {
#if PICO_NO_FLASH
__unused uint8_t *ignore = id_out;
panic_unsupported();
#else
uint8_t txbuf[FLASH_RUID_TOTAL_BYTES] = {0};
uint8_t rxbuf[FLASH_RUID_TOTAL_BYTES] = {0};
txbuf[0] = FLASH_RUID_CMD;
flash_do_cmd(txbuf, rxbuf, FLASH_RUID_TOTAL_BYTES);
for (int i = 0; i < FLASH_RUID_DATA_BYTES; i++)
id_out[i] = rxbuf[i + 1 + FLASH_RUID_DUMMY_BYTES];
#endif
}