| /** |
| * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| // ============================================================================= |
| // Register block : PADS_BANK0 |
| // Version : 1 |
| // Bus type : apb |
| // Description : None |
| // ============================================================================= |
| #ifndef HARDWARE_REGS_PADS_BANK0_DEFINED |
| #define HARDWARE_REGS_PADS_BANK0_DEFINED |
| // ============================================================================= |
| // Register : PADS_BANK0_VOLTAGE_SELECT |
| // Description : Voltage select. Per bank control |
| // 0x0 -> Set voltage to 3.3V (DVDD >= 2V5) |
| // 0x1 -> Set voltage to 1.8V (DVDD <= 1V8) |
| #define PADS_BANK0_VOLTAGE_SELECT_OFFSET 0x00000000 |
| #define PADS_BANK0_VOLTAGE_SELECT_BITS 0x00000001 |
| #define PADS_BANK0_VOLTAGE_SELECT_RESET 0x00000000 |
| #define PADS_BANK0_VOLTAGE_SELECT_MSB 0 |
| #define PADS_BANK0_VOLTAGE_SELECT_LSB 0 |
| #define PADS_BANK0_VOLTAGE_SELECT_ACCESS "RW" |
| #define PADS_BANK0_VOLTAGE_SELECT_VALUE_3V3 0x0 |
| #define PADS_BANK0_VOLTAGE_SELECT_VALUE_1V8 0x1 |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO0 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO0_OFFSET 0x00000004 |
| #define PADS_BANK0_GPIO0_BITS 0x000000ff |
| #define PADS_BANK0_GPIO0_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO0_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO0_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO0_OD_MSB 7 |
| #define PADS_BANK0_GPIO0_OD_LSB 7 |
| #define PADS_BANK0_GPIO0_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO0_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO0_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO0_IE_MSB 6 |
| #define PADS_BANK0_GPIO0_IE_LSB 6 |
| #define PADS_BANK0_GPIO0_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO0_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO0_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO0_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO0_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO0_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO0_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO0_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO0_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO0_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO0_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO0_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO0_PUE_MSB 3 |
| #define PADS_BANK0_GPIO0_PUE_LSB 3 |
| #define PADS_BANK0_GPIO0_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO0_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO0_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO0_PDE_MSB 2 |
| #define PADS_BANK0_GPIO0_PDE_LSB 2 |
| #define PADS_BANK0_GPIO0_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO0_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO0_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO0_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO0_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO0_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO0_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO0_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO0_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO0_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO0_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO0_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO1 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO1_OFFSET 0x00000008 |
| #define PADS_BANK0_GPIO1_BITS 0x000000ff |
| #define PADS_BANK0_GPIO1_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO1_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO1_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO1_OD_MSB 7 |
| #define PADS_BANK0_GPIO1_OD_LSB 7 |
| #define PADS_BANK0_GPIO1_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO1_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO1_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO1_IE_MSB 6 |
| #define PADS_BANK0_GPIO1_IE_LSB 6 |
| #define PADS_BANK0_GPIO1_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO1_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO1_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO1_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO1_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO1_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO1_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO1_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO1_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO1_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO1_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO1_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO1_PUE_MSB 3 |
| #define PADS_BANK0_GPIO1_PUE_LSB 3 |
| #define PADS_BANK0_GPIO1_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO1_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO1_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO1_PDE_MSB 2 |
| #define PADS_BANK0_GPIO1_PDE_LSB 2 |
| #define PADS_BANK0_GPIO1_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO1_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO1_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO1_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO1_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO1_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO1_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO1_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO1_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO1_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO1_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO1_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO2 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO2_OFFSET 0x0000000c |
| #define PADS_BANK0_GPIO2_BITS 0x000000ff |
| #define PADS_BANK0_GPIO2_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO2_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO2_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO2_OD_MSB 7 |
| #define PADS_BANK0_GPIO2_OD_LSB 7 |
| #define PADS_BANK0_GPIO2_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO2_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO2_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO2_IE_MSB 6 |
| #define PADS_BANK0_GPIO2_IE_LSB 6 |
| #define PADS_BANK0_GPIO2_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO2_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO2_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO2_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO2_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO2_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO2_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO2_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO2_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO2_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO2_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO2_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO2_PUE_MSB 3 |
| #define PADS_BANK0_GPIO2_PUE_LSB 3 |
| #define PADS_BANK0_GPIO2_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO2_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO2_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO2_PDE_MSB 2 |
| #define PADS_BANK0_GPIO2_PDE_LSB 2 |
| #define PADS_BANK0_GPIO2_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO2_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO2_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO2_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO2_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO2_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO2_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO2_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO2_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO2_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO2_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO2_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO3 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO3_OFFSET 0x00000010 |
| #define PADS_BANK0_GPIO3_BITS 0x000000ff |
| #define PADS_BANK0_GPIO3_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO3_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO3_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO3_OD_MSB 7 |
| #define PADS_BANK0_GPIO3_OD_LSB 7 |
| #define PADS_BANK0_GPIO3_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO3_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO3_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO3_IE_MSB 6 |
| #define PADS_BANK0_GPIO3_IE_LSB 6 |
| #define PADS_BANK0_GPIO3_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO3_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO3_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO3_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO3_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO3_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO3_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO3_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO3_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO3_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO3_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO3_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO3_PUE_MSB 3 |
| #define PADS_BANK0_GPIO3_PUE_LSB 3 |
| #define PADS_BANK0_GPIO3_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO3_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO3_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO3_PDE_MSB 2 |
| #define PADS_BANK0_GPIO3_PDE_LSB 2 |
| #define PADS_BANK0_GPIO3_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO3_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO3_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO3_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO3_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO3_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO3_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO3_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO3_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO3_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO3_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO3_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO4 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO4_OFFSET 0x00000014 |
| #define PADS_BANK0_GPIO4_BITS 0x000000ff |
| #define PADS_BANK0_GPIO4_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO4_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO4_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO4_OD_MSB 7 |
| #define PADS_BANK0_GPIO4_OD_LSB 7 |
| #define PADS_BANK0_GPIO4_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO4_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO4_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO4_IE_MSB 6 |
| #define PADS_BANK0_GPIO4_IE_LSB 6 |
| #define PADS_BANK0_GPIO4_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO4_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO4_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO4_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO4_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO4_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO4_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO4_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO4_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO4_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO4_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO4_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO4_PUE_MSB 3 |
| #define PADS_BANK0_GPIO4_PUE_LSB 3 |
| #define PADS_BANK0_GPIO4_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO4_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO4_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO4_PDE_MSB 2 |
| #define PADS_BANK0_GPIO4_PDE_LSB 2 |
| #define PADS_BANK0_GPIO4_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO4_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO4_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO4_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO4_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO4_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO4_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO4_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO4_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO4_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO4_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO4_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO5 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO5_OFFSET 0x00000018 |
| #define PADS_BANK0_GPIO5_BITS 0x000000ff |
| #define PADS_BANK0_GPIO5_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO5_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO5_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO5_OD_MSB 7 |
| #define PADS_BANK0_GPIO5_OD_LSB 7 |
| #define PADS_BANK0_GPIO5_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO5_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO5_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO5_IE_MSB 6 |
| #define PADS_BANK0_GPIO5_IE_LSB 6 |
| #define PADS_BANK0_GPIO5_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO5_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO5_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO5_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO5_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO5_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO5_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO5_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO5_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO5_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO5_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO5_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO5_PUE_MSB 3 |
| #define PADS_BANK0_GPIO5_PUE_LSB 3 |
| #define PADS_BANK0_GPIO5_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO5_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO5_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO5_PDE_MSB 2 |
| #define PADS_BANK0_GPIO5_PDE_LSB 2 |
| #define PADS_BANK0_GPIO5_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO5_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO5_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO5_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO5_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO5_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO5_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO5_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO5_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO5_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO5_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO5_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO6 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO6_OFFSET 0x0000001c |
| #define PADS_BANK0_GPIO6_BITS 0x000000ff |
| #define PADS_BANK0_GPIO6_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO6_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO6_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO6_OD_MSB 7 |
| #define PADS_BANK0_GPIO6_OD_LSB 7 |
| #define PADS_BANK0_GPIO6_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO6_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO6_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO6_IE_MSB 6 |
| #define PADS_BANK0_GPIO6_IE_LSB 6 |
| #define PADS_BANK0_GPIO6_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO6_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO6_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO6_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO6_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO6_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO6_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO6_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO6_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO6_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO6_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO6_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO6_PUE_MSB 3 |
| #define PADS_BANK0_GPIO6_PUE_LSB 3 |
| #define PADS_BANK0_GPIO6_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO6_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO6_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO6_PDE_MSB 2 |
| #define PADS_BANK0_GPIO6_PDE_LSB 2 |
| #define PADS_BANK0_GPIO6_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO6_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO6_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO6_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO6_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO6_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO6_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO6_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO6_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO6_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO6_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO6_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO7 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO7_OFFSET 0x00000020 |
| #define PADS_BANK0_GPIO7_BITS 0x000000ff |
| #define PADS_BANK0_GPIO7_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO7_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO7_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO7_OD_MSB 7 |
| #define PADS_BANK0_GPIO7_OD_LSB 7 |
| #define PADS_BANK0_GPIO7_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO7_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO7_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO7_IE_MSB 6 |
| #define PADS_BANK0_GPIO7_IE_LSB 6 |
| #define PADS_BANK0_GPIO7_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO7_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO7_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO7_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO7_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO7_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO7_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO7_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO7_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO7_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO7_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO7_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO7_PUE_MSB 3 |
| #define PADS_BANK0_GPIO7_PUE_LSB 3 |
| #define PADS_BANK0_GPIO7_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO7_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO7_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO7_PDE_MSB 2 |
| #define PADS_BANK0_GPIO7_PDE_LSB 2 |
| #define PADS_BANK0_GPIO7_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO7_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO7_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO7_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO7_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO7_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO7_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO7_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO7_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO7_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO7_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO7_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO8 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO8_OFFSET 0x00000024 |
| #define PADS_BANK0_GPIO8_BITS 0x000000ff |
| #define PADS_BANK0_GPIO8_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO8_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO8_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO8_OD_MSB 7 |
| #define PADS_BANK0_GPIO8_OD_LSB 7 |
| #define PADS_BANK0_GPIO8_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO8_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO8_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO8_IE_MSB 6 |
| #define PADS_BANK0_GPIO8_IE_LSB 6 |
| #define PADS_BANK0_GPIO8_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO8_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO8_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO8_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO8_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO8_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO8_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO8_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO8_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO8_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO8_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO8_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO8_PUE_MSB 3 |
| #define PADS_BANK0_GPIO8_PUE_LSB 3 |
| #define PADS_BANK0_GPIO8_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO8_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO8_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO8_PDE_MSB 2 |
| #define PADS_BANK0_GPIO8_PDE_LSB 2 |
| #define PADS_BANK0_GPIO8_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO8_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO8_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO8_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO8_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO8_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO8_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO8_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO8_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO8_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO8_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO8_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO9 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO9_OFFSET 0x00000028 |
| #define PADS_BANK0_GPIO9_BITS 0x000000ff |
| #define PADS_BANK0_GPIO9_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO9_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO9_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO9_OD_MSB 7 |
| #define PADS_BANK0_GPIO9_OD_LSB 7 |
| #define PADS_BANK0_GPIO9_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO9_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO9_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO9_IE_MSB 6 |
| #define PADS_BANK0_GPIO9_IE_LSB 6 |
| #define PADS_BANK0_GPIO9_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO9_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO9_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO9_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO9_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO9_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO9_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO9_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO9_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO9_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO9_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO9_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO9_PUE_MSB 3 |
| #define PADS_BANK0_GPIO9_PUE_LSB 3 |
| #define PADS_BANK0_GPIO9_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO9_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO9_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO9_PDE_MSB 2 |
| #define PADS_BANK0_GPIO9_PDE_LSB 2 |
| #define PADS_BANK0_GPIO9_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO9_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO9_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO9_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO9_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO9_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO9_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO9_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO9_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO9_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO9_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO9_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO10 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO10_OFFSET 0x0000002c |
| #define PADS_BANK0_GPIO10_BITS 0x000000ff |
| #define PADS_BANK0_GPIO10_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO10_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO10_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO10_OD_MSB 7 |
| #define PADS_BANK0_GPIO10_OD_LSB 7 |
| #define PADS_BANK0_GPIO10_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO10_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO10_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO10_IE_MSB 6 |
| #define PADS_BANK0_GPIO10_IE_LSB 6 |
| #define PADS_BANK0_GPIO10_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO10_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO10_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO10_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO10_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO10_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO10_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO10_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO10_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO10_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO10_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO10_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO10_PUE_MSB 3 |
| #define PADS_BANK0_GPIO10_PUE_LSB 3 |
| #define PADS_BANK0_GPIO10_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO10_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO10_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO10_PDE_MSB 2 |
| #define PADS_BANK0_GPIO10_PDE_LSB 2 |
| #define PADS_BANK0_GPIO10_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO10_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO10_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO10_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO10_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO10_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO10_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO10_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO10_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO10_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO10_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO10_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO11 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO11_OFFSET 0x00000030 |
| #define PADS_BANK0_GPIO11_BITS 0x000000ff |
| #define PADS_BANK0_GPIO11_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO11_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO11_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO11_OD_MSB 7 |
| #define PADS_BANK0_GPIO11_OD_LSB 7 |
| #define PADS_BANK0_GPIO11_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO11_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO11_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO11_IE_MSB 6 |
| #define PADS_BANK0_GPIO11_IE_LSB 6 |
| #define PADS_BANK0_GPIO11_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO11_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO11_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO11_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO11_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO11_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO11_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO11_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO11_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO11_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO11_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO11_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO11_PUE_MSB 3 |
| #define PADS_BANK0_GPIO11_PUE_LSB 3 |
| #define PADS_BANK0_GPIO11_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO11_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO11_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO11_PDE_MSB 2 |
| #define PADS_BANK0_GPIO11_PDE_LSB 2 |
| #define PADS_BANK0_GPIO11_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO11_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO11_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO11_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO11_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO11_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO11_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO11_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO11_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO11_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO11_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO11_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO12 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO12_OFFSET 0x00000034 |
| #define PADS_BANK0_GPIO12_BITS 0x000000ff |
| #define PADS_BANK0_GPIO12_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO12_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO12_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO12_OD_MSB 7 |
| #define PADS_BANK0_GPIO12_OD_LSB 7 |
| #define PADS_BANK0_GPIO12_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO12_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO12_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO12_IE_MSB 6 |
| #define PADS_BANK0_GPIO12_IE_LSB 6 |
| #define PADS_BANK0_GPIO12_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO12_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO12_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO12_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO12_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO12_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO12_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO12_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO12_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO12_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO12_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO12_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO12_PUE_MSB 3 |
| #define PADS_BANK0_GPIO12_PUE_LSB 3 |
| #define PADS_BANK0_GPIO12_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO12_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO12_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO12_PDE_MSB 2 |
| #define PADS_BANK0_GPIO12_PDE_LSB 2 |
| #define PADS_BANK0_GPIO12_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO12_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO12_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO12_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO12_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO12_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO12_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO12_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO12_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO12_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO12_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO12_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO13 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO13_OFFSET 0x00000038 |
| #define PADS_BANK0_GPIO13_BITS 0x000000ff |
| #define PADS_BANK0_GPIO13_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO13_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO13_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO13_OD_MSB 7 |
| #define PADS_BANK0_GPIO13_OD_LSB 7 |
| #define PADS_BANK0_GPIO13_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO13_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO13_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO13_IE_MSB 6 |
| #define PADS_BANK0_GPIO13_IE_LSB 6 |
| #define PADS_BANK0_GPIO13_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO13_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO13_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO13_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO13_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO13_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO13_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO13_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO13_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO13_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO13_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO13_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO13_PUE_MSB 3 |
| #define PADS_BANK0_GPIO13_PUE_LSB 3 |
| #define PADS_BANK0_GPIO13_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO13_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO13_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO13_PDE_MSB 2 |
| #define PADS_BANK0_GPIO13_PDE_LSB 2 |
| #define PADS_BANK0_GPIO13_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO13_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO13_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO13_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO13_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO13_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO13_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO13_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO13_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO13_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO13_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO13_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO14 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO14_OFFSET 0x0000003c |
| #define PADS_BANK0_GPIO14_BITS 0x000000ff |
| #define PADS_BANK0_GPIO14_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO14_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO14_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO14_OD_MSB 7 |
| #define PADS_BANK0_GPIO14_OD_LSB 7 |
| #define PADS_BANK0_GPIO14_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO14_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO14_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO14_IE_MSB 6 |
| #define PADS_BANK0_GPIO14_IE_LSB 6 |
| #define PADS_BANK0_GPIO14_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO14_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO14_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO14_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO14_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO14_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO14_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO14_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO14_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO14_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO14_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO14_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO14_PUE_MSB 3 |
| #define PADS_BANK0_GPIO14_PUE_LSB 3 |
| #define PADS_BANK0_GPIO14_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO14_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO14_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO14_PDE_MSB 2 |
| #define PADS_BANK0_GPIO14_PDE_LSB 2 |
| #define PADS_BANK0_GPIO14_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO14_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO14_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO14_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO14_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO14_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO14_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO14_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO14_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO14_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO14_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO14_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO15 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO15_OFFSET 0x00000040 |
| #define PADS_BANK0_GPIO15_BITS 0x000000ff |
| #define PADS_BANK0_GPIO15_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO15_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO15_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO15_OD_MSB 7 |
| #define PADS_BANK0_GPIO15_OD_LSB 7 |
| #define PADS_BANK0_GPIO15_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO15_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO15_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO15_IE_MSB 6 |
| #define PADS_BANK0_GPIO15_IE_LSB 6 |
| #define PADS_BANK0_GPIO15_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO15_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO15_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO15_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO15_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO15_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO15_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO15_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO15_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO15_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO15_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO15_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO15_PUE_MSB 3 |
| #define PADS_BANK0_GPIO15_PUE_LSB 3 |
| #define PADS_BANK0_GPIO15_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO15_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO15_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO15_PDE_MSB 2 |
| #define PADS_BANK0_GPIO15_PDE_LSB 2 |
| #define PADS_BANK0_GPIO15_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO15_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO15_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO15_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO15_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO15_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO15_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO15_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO15_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO15_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO15_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO15_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO16 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO16_OFFSET 0x00000044 |
| #define PADS_BANK0_GPIO16_BITS 0x000000ff |
| #define PADS_BANK0_GPIO16_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO16_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO16_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO16_OD_MSB 7 |
| #define PADS_BANK0_GPIO16_OD_LSB 7 |
| #define PADS_BANK0_GPIO16_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO16_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO16_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO16_IE_MSB 6 |
| #define PADS_BANK0_GPIO16_IE_LSB 6 |
| #define PADS_BANK0_GPIO16_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO16_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO16_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO16_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO16_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO16_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO16_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO16_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO16_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO16_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO16_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO16_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO16_PUE_MSB 3 |
| #define PADS_BANK0_GPIO16_PUE_LSB 3 |
| #define PADS_BANK0_GPIO16_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO16_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO16_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO16_PDE_MSB 2 |
| #define PADS_BANK0_GPIO16_PDE_LSB 2 |
| #define PADS_BANK0_GPIO16_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO16_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO16_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO16_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO16_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO16_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO16_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO16_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO16_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO16_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO16_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO16_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO17 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO17_OFFSET 0x00000048 |
| #define PADS_BANK0_GPIO17_BITS 0x000000ff |
| #define PADS_BANK0_GPIO17_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO17_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO17_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO17_OD_MSB 7 |
| #define PADS_BANK0_GPIO17_OD_LSB 7 |
| #define PADS_BANK0_GPIO17_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO17_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO17_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO17_IE_MSB 6 |
| #define PADS_BANK0_GPIO17_IE_LSB 6 |
| #define PADS_BANK0_GPIO17_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO17_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO17_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO17_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO17_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO17_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO17_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO17_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO17_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO17_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO17_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO17_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO17_PUE_MSB 3 |
| #define PADS_BANK0_GPIO17_PUE_LSB 3 |
| #define PADS_BANK0_GPIO17_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO17_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO17_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO17_PDE_MSB 2 |
| #define PADS_BANK0_GPIO17_PDE_LSB 2 |
| #define PADS_BANK0_GPIO17_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO17_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO17_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO17_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO17_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO17_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO17_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO17_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO17_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO17_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO17_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO17_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO18 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO18_OFFSET 0x0000004c |
| #define PADS_BANK0_GPIO18_BITS 0x000000ff |
| #define PADS_BANK0_GPIO18_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO18_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO18_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO18_OD_MSB 7 |
| #define PADS_BANK0_GPIO18_OD_LSB 7 |
| #define PADS_BANK0_GPIO18_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO18_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO18_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO18_IE_MSB 6 |
| #define PADS_BANK0_GPIO18_IE_LSB 6 |
| #define PADS_BANK0_GPIO18_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO18_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO18_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO18_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO18_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO18_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO18_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO18_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO18_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO18_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO18_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO18_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO18_PUE_MSB 3 |
| #define PADS_BANK0_GPIO18_PUE_LSB 3 |
| #define PADS_BANK0_GPIO18_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO18_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO18_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO18_PDE_MSB 2 |
| #define PADS_BANK0_GPIO18_PDE_LSB 2 |
| #define PADS_BANK0_GPIO18_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO18_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO18_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO18_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO18_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO18_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO18_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO18_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO18_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO18_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO18_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO18_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO19 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO19_OFFSET 0x00000050 |
| #define PADS_BANK0_GPIO19_BITS 0x000000ff |
| #define PADS_BANK0_GPIO19_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO19_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO19_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO19_OD_MSB 7 |
| #define PADS_BANK0_GPIO19_OD_LSB 7 |
| #define PADS_BANK0_GPIO19_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO19_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO19_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO19_IE_MSB 6 |
| #define PADS_BANK0_GPIO19_IE_LSB 6 |
| #define PADS_BANK0_GPIO19_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO19_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO19_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO19_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO19_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO19_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO19_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO19_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO19_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO19_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO19_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO19_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO19_PUE_MSB 3 |
| #define PADS_BANK0_GPIO19_PUE_LSB 3 |
| #define PADS_BANK0_GPIO19_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO19_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO19_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO19_PDE_MSB 2 |
| #define PADS_BANK0_GPIO19_PDE_LSB 2 |
| #define PADS_BANK0_GPIO19_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO19_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO19_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO19_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO19_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO19_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO19_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO19_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO19_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO19_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO19_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO19_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO20 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO20_OFFSET 0x00000054 |
| #define PADS_BANK0_GPIO20_BITS 0x000000ff |
| #define PADS_BANK0_GPIO20_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO20_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO20_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO20_OD_MSB 7 |
| #define PADS_BANK0_GPIO20_OD_LSB 7 |
| #define PADS_BANK0_GPIO20_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO20_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO20_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO20_IE_MSB 6 |
| #define PADS_BANK0_GPIO20_IE_LSB 6 |
| #define PADS_BANK0_GPIO20_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO20_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO20_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO20_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO20_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO20_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO20_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO20_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO20_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO20_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO20_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO20_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO20_PUE_MSB 3 |
| #define PADS_BANK0_GPIO20_PUE_LSB 3 |
| #define PADS_BANK0_GPIO20_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO20_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO20_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO20_PDE_MSB 2 |
| #define PADS_BANK0_GPIO20_PDE_LSB 2 |
| #define PADS_BANK0_GPIO20_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO20_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO20_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO20_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO20_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO20_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO20_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO20_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO20_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO20_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO20_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO20_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO21 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO21_OFFSET 0x00000058 |
| #define PADS_BANK0_GPIO21_BITS 0x000000ff |
| #define PADS_BANK0_GPIO21_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO21_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO21_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO21_OD_MSB 7 |
| #define PADS_BANK0_GPIO21_OD_LSB 7 |
| #define PADS_BANK0_GPIO21_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO21_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO21_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO21_IE_MSB 6 |
| #define PADS_BANK0_GPIO21_IE_LSB 6 |
| #define PADS_BANK0_GPIO21_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO21_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO21_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO21_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO21_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO21_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO21_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO21_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO21_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO21_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO21_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO21_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO21_PUE_MSB 3 |
| #define PADS_BANK0_GPIO21_PUE_LSB 3 |
| #define PADS_BANK0_GPIO21_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO21_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO21_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO21_PDE_MSB 2 |
| #define PADS_BANK0_GPIO21_PDE_LSB 2 |
| #define PADS_BANK0_GPIO21_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO21_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO21_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO21_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO21_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO21_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO21_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO21_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO21_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO21_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO21_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO21_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO22 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO22_OFFSET 0x0000005c |
| #define PADS_BANK0_GPIO22_BITS 0x000000ff |
| #define PADS_BANK0_GPIO22_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO22_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO22_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO22_OD_MSB 7 |
| #define PADS_BANK0_GPIO22_OD_LSB 7 |
| #define PADS_BANK0_GPIO22_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO22_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO22_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO22_IE_MSB 6 |
| #define PADS_BANK0_GPIO22_IE_LSB 6 |
| #define PADS_BANK0_GPIO22_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO22_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO22_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO22_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO22_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO22_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO22_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO22_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO22_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO22_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO22_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO22_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO22_PUE_MSB 3 |
| #define PADS_BANK0_GPIO22_PUE_LSB 3 |
| #define PADS_BANK0_GPIO22_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO22_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO22_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO22_PDE_MSB 2 |
| #define PADS_BANK0_GPIO22_PDE_LSB 2 |
| #define PADS_BANK0_GPIO22_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO22_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO22_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO22_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO22_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO22_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO22_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO22_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO22_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO22_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO22_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO22_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO23 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO23_OFFSET 0x00000060 |
| #define PADS_BANK0_GPIO23_BITS 0x000000ff |
| #define PADS_BANK0_GPIO23_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO23_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO23_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO23_OD_MSB 7 |
| #define PADS_BANK0_GPIO23_OD_LSB 7 |
| #define PADS_BANK0_GPIO23_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO23_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO23_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO23_IE_MSB 6 |
| #define PADS_BANK0_GPIO23_IE_LSB 6 |
| #define PADS_BANK0_GPIO23_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO23_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO23_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO23_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO23_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO23_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO23_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO23_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO23_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO23_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO23_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO23_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO23_PUE_MSB 3 |
| #define PADS_BANK0_GPIO23_PUE_LSB 3 |
| #define PADS_BANK0_GPIO23_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO23_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO23_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO23_PDE_MSB 2 |
| #define PADS_BANK0_GPIO23_PDE_LSB 2 |
| #define PADS_BANK0_GPIO23_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO23_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO23_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO23_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO23_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO23_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO23_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO23_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO23_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO23_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO23_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO23_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO24 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO24_OFFSET 0x00000064 |
| #define PADS_BANK0_GPIO24_BITS 0x000000ff |
| #define PADS_BANK0_GPIO24_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO24_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO24_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO24_OD_MSB 7 |
| #define PADS_BANK0_GPIO24_OD_LSB 7 |
| #define PADS_BANK0_GPIO24_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO24_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO24_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO24_IE_MSB 6 |
| #define PADS_BANK0_GPIO24_IE_LSB 6 |
| #define PADS_BANK0_GPIO24_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO24_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO24_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO24_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO24_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO24_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO24_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO24_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO24_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO24_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO24_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO24_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO24_PUE_MSB 3 |
| #define PADS_BANK0_GPIO24_PUE_LSB 3 |
| #define PADS_BANK0_GPIO24_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO24_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO24_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO24_PDE_MSB 2 |
| #define PADS_BANK0_GPIO24_PDE_LSB 2 |
| #define PADS_BANK0_GPIO24_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO24_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO24_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO24_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO24_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO24_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO24_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO24_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO24_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO24_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO24_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO24_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO25 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO25_OFFSET 0x00000068 |
| #define PADS_BANK0_GPIO25_BITS 0x000000ff |
| #define PADS_BANK0_GPIO25_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO25_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO25_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO25_OD_MSB 7 |
| #define PADS_BANK0_GPIO25_OD_LSB 7 |
| #define PADS_BANK0_GPIO25_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO25_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO25_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO25_IE_MSB 6 |
| #define PADS_BANK0_GPIO25_IE_LSB 6 |
| #define PADS_BANK0_GPIO25_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO25_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO25_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO25_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO25_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO25_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO25_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO25_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO25_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO25_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO25_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO25_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO25_PUE_MSB 3 |
| #define PADS_BANK0_GPIO25_PUE_LSB 3 |
| #define PADS_BANK0_GPIO25_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO25_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO25_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO25_PDE_MSB 2 |
| #define PADS_BANK0_GPIO25_PDE_LSB 2 |
| #define PADS_BANK0_GPIO25_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO25_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO25_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO25_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO25_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO25_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO25_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO25_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO25_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO25_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO25_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO25_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO26 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO26_OFFSET 0x0000006c |
| #define PADS_BANK0_GPIO26_BITS 0x000000ff |
| #define PADS_BANK0_GPIO26_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO26_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO26_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO26_OD_MSB 7 |
| #define PADS_BANK0_GPIO26_OD_LSB 7 |
| #define PADS_BANK0_GPIO26_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO26_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO26_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO26_IE_MSB 6 |
| #define PADS_BANK0_GPIO26_IE_LSB 6 |
| #define PADS_BANK0_GPIO26_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO26_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO26_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO26_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO26_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO26_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO26_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO26_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO26_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO26_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO26_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO26_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO26_PUE_MSB 3 |
| #define PADS_BANK0_GPIO26_PUE_LSB 3 |
| #define PADS_BANK0_GPIO26_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO26_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO26_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO26_PDE_MSB 2 |
| #define PADS_BANK0_GPIO26_PDE_LSB 2 |
| #define PADS_BANK0_GPIO26_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO26_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO26_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO26_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO26_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO26_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO26_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO26_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO26_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO26_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO26_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO26_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO27 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO27_OFFSET 0x00000070 |
| #define PADS_BANK0_GPIO27_BITS 0x000000ff |
| #define PADS_BANK0_GPIO27_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO27_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO27_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO27_OD_MSB 7 |
| #define PADS_BANK0_GPIO27_OD_LSB 7 |
| #define PADS_BANK0_GPIO27_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO27_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO27_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO27_IE_MSB 6 |
| #define PADS_BANK0_GPIO27_IE_LSB 6 |
| #define PADS_BANK0_GPIO27_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO27_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO27_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO27_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO27_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO27_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO27_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO27_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO27_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO27_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO27_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO27_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO27_PUE_MSB 3 |
| #define PADS_BANK0_GPIO27_PUE_LSB 3 |
| #define PADS_BANK0_GPIO27_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO27_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO27_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO27_PDE_MSB 2 |
| #define PADS_BANK0_GPIO27_PDE_LSB 2 |
| #define PADS_BANK0_GPIO27_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO27_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO27_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO27_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO27_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO27_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO27_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO27_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO27_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO27_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO27_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO27_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO28 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO28_OFFSET 0x00000074 |
| #define PADS_BANK0_GPIO28_BITS 0x000000ff |
| #define PADS_BANK0_GPIO28_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO28_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO28_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO28_OD_MSB 7 |
| #define PADS_BANK0_GPIO28_OD_LSB 7 |
| #define PADS_BANK0_GPIO28_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO28_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO28_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO28_IE_MSB 6 |
| #define PADS_BANK0_GPIO28_IE_LSB 6 |
| #define PADS_BANK0_GPIO28_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO28_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO28_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO28_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO28_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO28_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO28_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO28_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO28_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO28_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO28_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO28_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO28_PUE_MSB 3 |
| #define PADS_BANK0_GPIO28_PUE_LSB 3 |
| #define PADS_BANK0_GPIO28_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO28_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO28_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO28_PDE_MSB 2 |
| #define PADS_BANK0_GPIO28_PDE_LSB 2 |
| #define PADS_BANK0_GPIO28_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO28_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO28_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO28_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO28_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO28_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO28_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO28_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO28_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO28_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO28_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO28_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_GPIO29 |
| // Description : Pad control register |
| #define PADS_BANK0_GPIO29_OFFSET 0x00000078 |
| #define PADS_BANK0_GPIO29_BITS 0x000000ff |
| #define PADS_BANK0_GPIO29_RESET 0x00000056 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_GPIO29_OD_RESET 0x0 |
| #define PADS_BANK0_GPIO29_OD_BITS 0x00000080 |
| #define PADS_BANK0_GPIO29_OD_MSB 7 |
| #define PADS_BANK0_GPIO29_OD_LSB 7 |
| #define PADS_BANK0_GPIO29_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_IE |
| // Description : Input enable |
| #define PADS_BANK0_GPIO29_IE_RESET 0x1 |
| #define PADS_BANK0_GPIO29_IE_BITS 0x00000040 |
| #define PADS_BANK0_GPIO29_IE_MSB 6 |
| #define PADS_BANK0_GPIO29_IE_LSB 6 |
| #define PADS_BANK0_GPIO29_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_GPIO29_DRIVE_RESET 0x1 |
| #define PADS_BANK0_GPIO29_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_GPIO29_DRIVE_MSB 5 |
| #define PADS_BANK0_GPIO29_DRIVE_LSB 4 |
| #define PADS_BANK0_GPIO29_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_GPIO29_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_GPIO29_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_GPIO29_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_GPIO29_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_GPIO29_PUE_RESET 0x0 |
| #define PADS_BANK0_GPIO29_PUE_BITS 0x00000008 |
| #define PADS_BANK0_GPIO29_PUE_MSB 3 |
| #define PADS_BANK0_GPIO29_PUE_LSB 3 |
| #define PADS_BANK0_GPIO29_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_GPIO29_PDE_RESET 0x1 |
| #define PADS_BANK0_GPIO29_PDE_BITS 0x00000004 |
| #define PADS_BANK0_GPIO29_PDE_MSB 2 |
| #define PADS_BANK0_GPIO29_PDE_LSB 2 |
| #define PADS_BANK0_GPIO29_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_GPIO29_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_GPIO29_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_GPIO29_SCHMITT_MSB 1 |
| #define PADS_BANK0_GPIO29_SCHMITT_LSB 1 |
| #define PADS_BANK0_GPIO29_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_GPIO29_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_GPIO29_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_GPIO29_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_GPIO29_SLEWFAST_MSB 0 |
| #define PADS_BANK0_GPIO29_SLEWFAST_LSB 0 |
| #define PADS_BANK0_GPIO29_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_SWCLK |
| // Description : Pad control register |
| #define PADS_BANK0_SWCLK_OFFSET 0x0000007c |
| #define PADS_BANK0_SWCLK_BITS 0x000000ff |
| #define PADS_BANK0_SWCLK_RESET 0x000000da |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_SWCLK_OD_RESET 0x1 |
| #define PADS_BANK0_SWCLK_OD_BITS 0x00000080 |
| #define PADS_BANK0_SWCLK_OD_MSB 7 |
| #define PADS_BANK0_SWCLK_OD_LSB 7 |
| #define PADS_BANK0_SWCLK_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_IE |
| // Description : Input enable |
| #define PADS_BANK0_SWCLK_IE_RESET 0x1 |
| #define PADS_BANK0_SWCLK_IE_BITS 0x00000040 |
| #define PADS_BANK0_SWCLK_IE_MSB 6 |
| #define PADS_BANK0_SWCLK_IE_LSB 6 |
| #define PADS_BANK0_SWCLK_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_SWCLK_DRIVE_RESET 0x1 |
| #define PADS_BANK0_SWCLK_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_SWCLK_DRIVE_MSB 5 |
| #define PADS_BANK0_SWCLK_DRIVE_LSB 4 |
| #define PADS_BANK0_SWCLK_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_SWCLK_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_SWCLK_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_SWCLK_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_SWCLK_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_SWCLK_PUE_RESET 0x1 |
| #define PADS_BANK0_SWCLK_PUE_BITS 0x00000008 |
| #define PADS_BANK0_SWCLK_PUE_MSB 3 |
| #define PADS_BANK0_SWCLK_PUE_LSB 3 |
| #define PADS_BANK0_SWCLK_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_SWCLK_PDE_RESET 0x0 |
| #define PADS_BANK0_SWCLK_PDE_BITS 0x00000004 |
| #define PADS_BANK0_SWCLK_PDE_MSB 2 |
| #define PADS_BANK0_SWCLK_PDE_LSB 2 |
| #define PADS_BANK0_SWCLK_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_SWCLK_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_SWCLK_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_SWCLK_SCHMITT_MSB 1 |
| #define PADS_BANK0_SWCLK_SCHMITT_LSB 1 |
| #define PADS_BANK0_SWCLK_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWCLK_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_SWCLK_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_SWCLK_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_SWCLK_SLEWFAST_MSB 0 |
| #define PADS_BANK0_SWCLK_SLEWFAST_LSB 0 |
| #define PADS_BANK0_SWCLK_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| // Register : PADS_BANK0_SWD |
| // Description : Pad control register |
| #define PADS_BANK0_SWD_OFFSET 0x00000080 |
| #define PADS_BANK0_SWD_BITS 0x000000ff |
| #define PADS_BANK0_SWD_RESET 0x0000005a |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_OD |
| // Description : Output disable. Has priority over output enable from |
| // peripherals |
| #define PADS_BANK0_SWD_OD_RESET 0x0 |
| #define PADS_BANK0_SWD_OD_BITS 0x00000080 |
| #define PADS_BANK0_SWD_OD_MSB 7 |
| #define PADS_BANK0_SWD_OD_LSB 7 |
| #define PADS_BANK0_SWD_OD_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_IE |
| // Description : Input enable |
| #define PADS_BANK0_SWD_IE_RESET 0x1 |
| #define PADS_BANK0_SWD_IE_BITS 0x00000040 |
| #define PADS_BANK0_SWD_IE_MSB 6 |
| #define PADS_BANK0_SWD_IE_LSB 6 |
| #define PADS_BANK0_SWD_IE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_DRIVE |
| // Description : Drive strength. |
| // 0x0 -> 2mA |
| // 0x1 -> 4mA |
| // 0x2 -> 8mA |
| // 0x3 -> 12mA |
| #define PADS_BANK0_SWD_DRIVE_RESET 0x1 |
| #define PADS_BANK0_SWD_DRIVE_BITS 0x00000030 |
| #define PADS_BANK0_SWD_DRIVE_MSB 5 |
| #define PADS_BANK0_SWD_DRIVE_LSB 4 |
| #define PADS_BANK0_SWD_DRIVE_ACCESS "RW" |
| #define PADS_BANK0_SWD_DRIVE_VALUE_2MA 0x0 |
| #define PADS_BANK0_SWD_DRIVE_VALUE_4MA 0x1 |
| #define PADS_BANK0_SWD_DRIVE_VALUE_8MA 0x2 |
| #define PADS_BANK0_SWD_DRIVE_VALUE_12MA 0x3 |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_PUE |
| // Description : Pull up enable |
| #define PADS_BANK0_SWD_PUE_RESET 0x1 |
| #define PADS_BANK0_SWD_PUE_BITS 0x00000008 |
| #define PADS_BANK0_SWD_PUE_MSB 3 |
| #define PADS_BANK0_SWD_PUE_LSB 3 |
| #define PADS_BANK0_SWD_PUE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_PDE |
| // Description : Pull down enable |
| #define PADS_BANK0_SWD_PDE_RESET 0x0 |
| #define PADS_BANK0_SWD_PDE_BITS 0x00000004 |
| #define PADS_BANK0_SWD_PDE_MSB 2 |
| #define PADS_BANK0_SWD_PDE_LSB 2 |
| #define PADS_BANK0_SWD_PDE_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_SCHMITT |
| // Description : Enable schmitt trigger |
| #define PADS_BANK0_SWD_SCHMITT_RESET 0x1 |
| #define PADS_BANK0_SWD_SCHMITT_BITS 0x00000002 |
| #define PADS_BANK0_SWD_SCHMITT_MSB 1 |
| #define PADS_BANK0_SWD_SCHMITT_LSB 1 |
| #define PADS_BANK0_SWD_SCHMITT_ACCESS "RW" |
| // ----------------------------------------------------------------------------- |
| // Field : PADS_BANK0_SWD_SLEWFAST |
| // Description : Slew rate control. 1 = Fast, 0 = Slow |
| #define PADS_BANK0_SWD_SLEWFAST_RESET 0x0 |
| #define PADS_BANK0_SWD_SLEWFAST_BITS 0x00000001 |
| #define PADS_BANK0_SWD_SLEWFAST_MSB 0 |
| #define PADS_BANK0_SWD_SLEWFAST_LSB 0 |
| #define PADS_BANK0_SWD_SLEWFAST_ACCESS "RW" |
| // ============================================================================= |
| #endif // HARDWARE_REGS_PADS_BANK0_DEFINED |
