tests: drivers: spi: spi_loopback: pse84 support
- Adding pse84 overlay files for the spi_loopback test
Signed-off-by: Brett Peterson <brett.peterson@infineon.com>
diff --git a/tests/drivers/spi/spi_loopback/boards/kit_pse84_eval_common.overlay b/tests/drivers/spi/spi_loopback/boards/kit_pse84_eval_common.overlay
new file mode 100644
index 0000000..d8390cf
--- /dev/null
+++ b/tests/drivers/spi/spi_loopback/boards/kit_pse84_eval_common.overlay
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2025 Infineon Technologies AG,
+ * or an affiliate of Infineon Technologies AG.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+spi1: &scb10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "infineon,cat1-spi-pdl";
+ status = "okay";
+
+ pinctrl-0 = <&p16_1_scb10_spi_m_mosi &p16_2_scb10_spi_m_miso &p16_0_scb10_spi_m_clk>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio_prt16 3 GPIO_ACTIVE_LOW>;
+
+ clocks = <&peri0_group1_16bit_2>;
+
+ slow@0 {
+ compatible = "test-spi-loopback-slow";
+ reg = <0>;
+ spi-max-frequency = <3000000>;
+ };
+
+ fast@0 {
+ compatible = "test-spi-loopback-fast";
+ reg = <0>;
+ spi-max-frequency = <3000000>;
+ };
+};
+
+&peri0_group1_16bit_2 {
+ status = "okay";
+ resource-type = <IFX_RSC_SCB>;
+ resource-instance = <10>;
+};
+
+&p16_1_scb10_spi_m_mosi {
+ drive-strength = "full";
+ drive-push-pull;
+};
+
+&p16_2_scb10_spi_m_miso {
+ drive-strength = "full";
+ input-enable;
+};
+
+&p16_0_scb10_spi_m_clk {
+ drive-strength = "full";
+ drive-push-pull;
+};
diff --git a/tests/drivers/spi/spi_loopback/boards/kit_pse84_eval_pse846gps2dbzc4a_m55.overlay b/tests/drivers/spi/spi_loopback/boards/kit_pse84_eval_pse846gps2dbzc4a_m55.overlay
new file mode 100644
index 0000000..533ab38
--- /dev/null
+++ b/tests/drivers/spi/spi_loopback/boards/kit_pse84_eval_pse846gps2dbzc4a_m55.overlay
@@ -0,0 +1,8 @@
+/*
+ * Copyright (c) 2025 Infineon Technologies AG,
+ * or an affiliate of Infineon Technologies AG.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "kit_pse84_eval_common.overlay"
