esp32: linker clean up to support BT
BT support requires lots of PROVIDE calls that cannot
be added into this linker file. All necessary includes
were moved into hal module to proper handled as needed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
diff --git a/soc/xtensa/esp32/linker.ld b/soc/xtensa/esp32/linker.ld
index 9f3824c..4cb39b5 100644
--- a/soc/xtensa/esp32/linker.ld
+++ b/soc/xtensa/esp32/linker.ld
@@ -24,53 +24,6 @@
#define IRAM_REGION iram0_0_seg :iram0_0_phdr
#define FLASH_CODE_REGION irom0_0_seg :irom0_0_phdr
-PROVIDE ( __stack = 0x3ffe3f20 );
-
-/* Global symbols required for espressif hal build */
-PROVIDE ( ets_printf = 0x40007d54 );
-PROVIDE ( intr_matrix_set = 0x4000681c );
-PROVIDE ( g_ticks_per_us_app = 0x3ffe40f0 );
-PROVIDE ( g_ticks_per_us_pro = 0x3ffe01e0 );
-PROVIDE ( ets_delay_us = 0x40008534 );
-PROVIDE ( gpio_output_set = 0x40009b24 );
-PROVIDE ( gpio_output_set_high = 0x40009b5c );
-PROVIDE ( roundup2 = 0x4000ab7c );
-PROVIDE ( crc32_le = 0x4005cfec );
-PROVIDE ( Cache_Read_Disable_rom = 0x40009ab8 );
-PROVIDE ( Cache_Read_Enable_rom = 0x40009a84 );
-PROVIDE ( Cache_Read_Init_rom = 0x40009950 );
-PROVIDE ( phy_get_romfuncs = 0x40004100 );
-PROVIDE ( esp_rom_spiflash_read_user_cmd = 0x400621b0 );
-PROVIDE ( g_rom_spiflash_dummy_len_plus = 0x3ffae290 );
-PROVIDE ( g_rom_flashchip = 0x3ffae270 );
-PROVIDE ( SPI0 = 0x3ff43000 );
-PROVIDE ( SPI1 = 0x3ff42fff );
-PROVIDE ( SPI2 = 0x3ff64fff );
-PROVIDE ( SPI3 = 0x3ff65fff );
-
-PROVIDE ( esp32_rom_uart_tx_one_char = 0x40009200 );
-PROVIDE ( esp32_rom_uart_rx_one_char = 0x400092d0 );
-PROVIDE ( esp32_rom_uart_attach = 0x40008fd0 );
-PROVIDE ( esp32_rom_uart_tx_wait_idle = 0x40009278 );
-PROVIDE ( esp32_rom_intr_matrix_set = intr_matrix_set );
-PROVIDE ( esp32_rom_gpio_matrix_in = 0x40009edc );
-PROVIDE ( esp32_rom_gpio_matrix_out = 0x40009f0c );
-PROVIDE ( esp32_rom_Cache_Flush = 0x40009a14 );
-PROVIDE ( esp32_rom_Cache_Read_Enable = 0x40009a84 );
-PROVIDE ( esp32_rom_ets_set_appcpu_boot_addr = 0x4000689c );
-PROVIDE ( esp32_rom_i2c_readReg = 0x40004148 );
-PROVIDE ( esp32_rom_i2c_writeReg = 0x400041a4 );
-PROVIDE ( esp32_rom_ets_printf = ets_printf );
-PROVIDE ( esp32_rom_g_ticks_per_us_app = g_ticks_per_us_app );
-PROVIDE ( esp32_rom_g_ticks_per_us_pro = g_ticks_per_us_app );
-PROVIDE ( esp32_rom_ets_delay_us = ets_delay_us );
-PROVIDE ( TIMERG0 = 0x3ff5F000 );
-PROVIDE ( TIMERG1 = 0x3ff60000 );
-
-/* __udivdi3 is exported using assignment, which declares strong symbols */
-__udivdi3 = 0x4000cff8;
-__umoddi3 = 0x4000d280;
-
MEMORY
{
iram0_0_seg(RX): org = 0x40080000, len = 0x20000
