drivers: mcux: flexio: Added MCUX FlexIO SPI driver
Added SPI driver using FlexIO.
Signed-off-by: Mikhail Siomin <victorovich.01@mail.ru>
diff --git a/drivers/spi/CMakeLists.txt b/drivers/spi/CMakeLists.txt
index cd46998..d5abf88 100644
--- a/drivers/spi/CMakeLists.txt
+++ b/drivers/spi/CMakeLists.txt
@@ -11,6 +11,7 @@
zephyr_library_sources_ifdef(CONFIG_SPI_STM32 spi_ll_stm32.c)
zephyr_library_sources_ifdef(CONFIG_SPI_MCUX_DSPI spi_mcux_dspi.c)
zephyr_library_sources_ifdef(CONFIG_SPI_MCUX_FLEXCOMM spi_mcux_flexcomm.c)
+zephyr_library_sources_ifdef(CONFIG_SPI_MCUX_FLEXIO spi_mcux_flexio.c)
zephyr_library_sources_ifdef(CONFIG_SPI_MCUX_LPSPI spi_mcux_lpspi.c)
zephyr_library_sources_ifdef(CONFIG_SPI_SAM spi_sam.c)
zephyr_library_sources_ifdef(CONFIG_SPI_SAM0 spi_sam0.c)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2cb7c83..acb37b3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,6 +75,8 @@
source "drivers/spi/Kconfig.mcux_flexcomm"
+source "drivers/spi/Kconfig.mcux_flexio"
+
source "drivers/spi/Kconfig.mcux_lpspi"
source "drivers/spi/Kconfig.rv32m1_lpspi"
diff --git a/drivers/spi/Kconfig.mcux_flexio b/drivers/spi/Kconfig.mcux_flexio
new file mode 100644
index 0000000..82e04a5
--- /dev/null
+++ b/drivers/spi/Kconfig.mcux_flexio
@@ -0,0 +1,11 @@
+# Copyright (c) 2024, STRIM, ALC
+# SPDX-License-Identifier: Apache-2.0
+
+config SPI_MCUX_FLEXIO
+ bool "MCUX FlexIO SPI driver"
+ default y
+ depends on DT_HAS_NXP_FLEXIO_SPI_ENABLED
+ depends on CLOCK_CONTROL
+ select MCUX_FLEXIO
+ help
+ Enable support for MCUX FlexIO SPI driver.
diff --git a/drivers/spi/spi_mcux_flexio.c b/drivers/spi/spi_mcux_flexio.c
new file mode 100644
index 0000000..69bb996
--- /dev/null
+++ b/drivers/spi/spi_mcux_flexio.c
@@ -0,0 +1,438 @@
+/*
+ * Copyright (c) 2024, STRIM, ALC
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#define DT_DRV_COMPAT nxp_flexio_spi
+
+#include <errno.h>
+#include <zephyr/drivers/spi.h>
+#include <zephyr/drivers/clock_control.h>
+#include <fsl_flexio_spi.h>
+#include <zephyr/logging/log.h>
+#include <zephyr/drivers/pinctrl.h>
+#include <zephyr/drivers/misc/nxp_flexio/nxp_flexio.h>
+
+LOG_MODULE_REGISTER(spi_mcux_flexio_spi, CONFIG_SPI_LOG_LEVEL);
+
+#include "spi_context.h"
+
+
+struct spi_mcux_flexio_config {
+ FLEXIO_SPI_Type *flexio_spi;
+ const struct device *flexio_dev;
+ const struct pinctrl_dev_config *pincfg;
+ const struct nxp_flexio_child *child;
+};
+
+struct spi_mcux_flexio_data {
+ const struct device *dev;
+ flexio_spi_master_handle_t handle;
+ struct spi_context ctx;
+ size_t transfer_len;
+ uint8_t transfer_flags;
+};
+
+
+static void spi_mcux_transfer_next_packet(const struct device *dev)
+{
+ const struct spi_mcux_flexio_config *config = dev->config;
+ struct spi_mcux_flexio_data *data = dev->data;
+ struct spi_context *ctx = &data->ctx;
+ flexio_spi_transfer_t transfer;
+ status_t status;
+
+ if ((ctx->tx_len == 0) && (ctx->rx_len == 0)) {
+ /* nothing left to rx or tx, we're done! */
+ spi_context_cs_control(&data->ctx, false);
+ spi_context_complete(&data->ctx, dev, 0);
+ return;
+ }
+
+ transfer.flags = kFLEXIO_SPI_csContinuous | data->transfer_flags;
+
+ if (ctx->tx_len == 0) {
+ /* rx only, nothing to tx */
+ transfer.txData = NULL;
+ transfer.rxData = ctx->rx_buf;
+ transfer.dataSize = ctx->rx_len;
+ } else if (ctx->rx_len == 0) {
+ /* tx only, nothing to rx */
+ transfer.txData = (uint8_t *) ctx->tx_buf;
+ transfer.rxData = NULL;
+ transfer.dataSize = ctx->tx_len;
+ } else if (ctx->tx_len == ctx->rx_len) {
+ /* rx and tx are the same length */
+ transfer.txData = (uint8_t *) ctx->tx_buf;
+ transfer.rxData = ctx->rx_buf;
+ transfer.dataSize = ctx->tx_len;
+ } else if (ctx->tx_len > ctx->rx_len) {
+ /* Break up the tx into multiple transfers so we don't have to
+ * rx into a longer intermediate buffer. Leave chip select
+ * active between transfers.
+ */
+ transfer.txData = (uint8_t *) ctx->tx_buf;
+ transfer.rxData = ctx->rx_buf;
+ transfer.dataSize = ctx->rx_len;
+ } else {
+ /* Break up the rx into multiple transfers so we don't have to
+ * tx from a longer intermediate buffer. Leave chip select
+ * active between transfers.
+ */
+ transfer.txData = (uint8_t *) ctx->tx_buf;
+ transfer.rxData = ctx->rx_buf;
+ transfer.dataSize = ctx->tx_len;
+ }
+
+ data->transfer_len = transfer.dataSize;
+
+ status = FLEXIO_SPI_MasterTransferNonBlocking(config->flexio_spi, &data->handle,
+ &transfer);
+ if (status != kStatus_Success) {
+ LOG_ERR("Transfer could not start");
+ }
+}
+
+static int spi_mcux_flexio_isr(void *user_data)
+{
+ const struct device *dev = (const struct device *)user_data;
+ const struct spi_mcux_flexio_config *config = dev->config;
+ struct spi_mcux_flexio_data *data = dev->data;
+
+ FLEXIO_SPI_MasterTransferHandleIRQ(config->flexio_spi, &data->handle);
+
+ return 0;
+}
+
+static void spi_mcux_master_transfer_callback(FLEXIO_SPI_Type *flexio_spi,
+ flexio_spi_master_handle_t *handle, status_t status, void *userData)
+{
+ struct spi_mcux_flexio_data *data = userData;
+
+ spi_context_update_tx(&data->ctx, 1, data->transfer_len);
+ spi_context_update_rx(&data->ctx, 1, data->transfer_len);
+
+ spi_mcux_transfer_next_packet(data->dev);
+}
+
+static void spi_flexio_master_init(FLEXIO_SPI_Type *base, flexio_spi_master_config_t *masterConfig,
+ uint8_t pol, uint32_t srcClock_Hz)
+{
+ assert(base != NULL);
+ assert(masterConfig != NULL);
+
+ flexio_shifter_config_t shifterConfig;
+ flexio_timer_config_t timerConfig;
+ uint32_t ctrlReg = 0;
+ uint16_t timerDiv = 0;
+ uint16_t timerCmp = 0;
+
+ /* Clear the shifterConfig & timerConfig struct. */
+ (void)memset(&shifterConfig, 0, sizeof(shifterConfig));
+ (void)memset(&timerConfig, 0, sizeof(timerConfig));
+
+ /* Configure FLEXIO SPI Master */
+ ctrlReg = base->flexioBase->CTRL;
+ ctrlReg &= ~(FLEXIO_CTRL_DOZEN_MASK | FLEXIO_CTRL_DBGE_MASK |
+ FLEXIO_CTRL_FASTACC_MASK | FLEXIO_CTRL_FLEXEN_MASK);
+ ctrlReg |= (FLEXIO_CTRL_DBGE(masterConfig->enableInDebug) |
+ FLEXIO_CTRL_FASTACC(masterConfig->enableFastAccess) |
+ FLEXIO_CTRL_FLEXEN(masterConfig->enableMaster));
+ if (!masterConfig->enableInDoze) {
+ ctrlReg |= FLEXIO_CTRL_DOZEN_MASK;
+ }
+
+ base->flexioBase->CTRL = ctrlReg;
+
+ /* Do hardware configuration. */
+ /* 1. Configure the shifter 0 for tx. */
+ shifterConfig.timerSelect = base->timerIndex[0];
+ shifterConfig.pinConfig = kFLEXIO_PinConfigOutput;
+ shifterConfig.pinSelect = base->SDOPinIndex;
+ shifterConfig.pinPolarity = kFLEXIO_PinActiveHigh;
+ shifterConfig.shifterMode = kFLEXIO_ShifterModeTransmit;
+ shifterConfig.inputSource = kFLEXIO_ShifterInputFromPin;
+ if (masterConfig->phase == kFLEXIO_SPI_ClockPhaseFirstEdge) {
+ shifterConfig.timerPolarity = kFLEXIO_ShifterTimerPolarityOnNegitive;
+ shifterConfig.shifterStop = kFLEXIO_ShifterStopBitDisable;
+ shifterConfig.shifterStart = kFLEXIO_ShifterStartBitDisabledLoadDataOnEnable;
+ } else {
+ shifterConfig.timerPolarity = kFLEXIO_ShifterTimerPolarityOnPositive;
+ shifterConfig.shifterStop = kFLEXIO_ShifterStopBitLow;
+ shifterConfig.shifterStart = kFLEXIO_ShifterStartBitDisabledLoadDataOnShift;
+ }
+
+ FLEXIO_SetShifterConfig(base->flexioBase, base->shifterIndex[0], &shifterConfig);
+
+ /* 2. Configure the shifter 1 for rx. */
+ shifterConfig.timerSelect = base->timerIndex[0];
+ shifterConfig.pinConfig = kFLEXIO_PinConfigOutputDisabled;
+ shifterConfig.pinSelect = base->SDIPinIndex;
+ shifterConfig.pinPolarity = kFLEXIO_PinActiveHigh;
+ shifterConfig.shifterMode = kFLEXIO_ShifterModeReceive;
+ shifterConfig.inputSource = kFLEXIO_ShifterInputFromPin;
+ shifterConfig.shifterStop = kFLEXIO_ShifterStopBitDisable;
+ shifterConfig.shifterStart = kFLEXIO_ShifterStartBitDisabledLoadDataOnEnable;
+ if (masterConfig->phase == kFLEXIO_SPI_ClockPhaseFirstEdge) {
+ shifterConfig.timerPolarity = kFLEXIO_ShifterTimerPolarityOnPositive;
+ } else {
+ shifterConfig.timerPolarity = kFLEXIO_ShifterTimerPolarityOnNegitive;
+ }
+
+ FLEXIO_SetShifterConfig(base->flexioBase, base->shifterIndex[1], &shifterConfig);
+
+ /*3. Configure the timer 0 for SCK. */
+ timerConfig.triggerSelect = FLEXIO_TIMER_TRIGGER_SEL_SHIFTnSTAT(base->shifterIndex[0]);
+ timerConfig.triggerPolarity = kFLEXIO_TimerTriggerPolarityActiveLow;
+ timerConfig.triggerSource = kFLEXIO_TimerTriggerSourceInternal;
+ timerConfig.pinConfig = kFLEXIO_PinConfigOutput;
+ timerConfig.pinSelect = base->SCKPinIndex;
+ timerConfig.pinPolarity = pol ? kFLEXIO_PinActiveLow : kFLEXIO_PinActiveHigh;
+ timerConfig.timerMode = kFLEXIO_TimerModeDual8BitBaudBit;
+ timerConfig.timerOutput = kFLEXIO_TimerOutputZeroNotAffectedByReset;
+ timerConfig.timerDecrement = kFLEXIO_TimerDecSrcOnFlexIOClockShiftTimerOutput;
+ timerConfig.timerReset = kFLEXIO_TimerResetNever;
+ timerConfig.timerDisable = kFLEXIO_TimerDisableOnTimerCompare;
+ timerConfig.timerEnable = kFLEXIO_TimerEnableOnTriggerHigh;
+ timerConfig.timerStop = kFLEXIO_TimerStopBitEnableOnTimerDisable;
+ timerConfig.timerStart = kFLEXIO_TimerStartBitEnabled;
+ /* Low 8-bits are used to configure baudrate. */
+ timerDiv = (uint16_t)(srcClock_Hz / masterConfig->baudRate_Bps);
+ timerDiv = timerDiv / 2U - 1U;
+ /* High 8-bits are used to configure shift clock edges(transfer width). */
+ timerCmp = ((uint16_t)masterConfig->dataMode * 2U - 1U) << 8U;
+ timerCmp |= timerDiv;
+
+ timerConfig.timerCompare = timerCmp;
+
+ FLEXIO_SetTimerConfig(base->flexioBase, base->timerIndex[0], &timerConfig);
+}
+
+static int spi_mcux_flexio_configure(const struct device *dev,
+ const struct spi_config *spi_cfg)
+{
+ const struct spi_mcux_flexio_config *config = dev->config;
+ struct spi_mcux_flexio_data *data = dev->data;
+
+ flexio_spi_master_config_t master_config;
+ uint32_t clock_freq;
+ uint32_t word_size;
+
+ if (spi_context_configured(&data->ctx, spi_cfg)) {
+ /* This configuration is already in use */
+ return 0;
+ }
+
+ if (spi_cfg->operation & SPI_HALF_DUPLEX) {
+ LOG_ERR("Half-duplex not supported");
+ return -ENOTSUP;
+ }
+
+ if (SPI_OP_MODE_GET(spi_cfg->operation) != SPI_OP_MODE_MASTER) {
+ LOG_ERR("Mode Slave not supported");
+ return -ENOTSUP;
+ }
+
+ FLEXIO_SPI_MasterGetDefaultConfig(&master_config);
+
+ word_size = SPI_WORD_SIZE_GET(spi_cfg->operation);
+ if ((word_size != 8) && (word_size != 16) && (word_size != 32)) {
+ LOG_ERR("Word size %d must be 8, 16 or 32", word_size);
+ return -EINVAL;
+ }
+ master_config.dataMode = word_size;
+
+ if (spi_cfg->operation & SPI_TRANSFER_LSB) {
+ if (word_size == 8) {
+ data->transfer_flags = kFLEXIO_SPI_8bitLsb;
+ } else if (word_size == 16) {
+ data->transfer_flags = kFLEXIO_SPI_16bitLsb;
+ } else {
+ data->transfer_flags = kFLEXIO_SPI_32bitLsb;
+ }
+ } else {
+ if (word_size == 8) {
+ data->transfer_flags = kFLEXIO_SPI_8bitMsb;
+ } else if (word_size == 16) {
+ data->transfer_flags = kFLEXIO_SPI_16bitMsb;
+ } else {
+ data->transfer_flags = kFLEXIO_SPI_32bitMsb;
+ }
+ }
+
+ if (nxp_flexio_get_rate(config->flexio_dev, &clock_freq)) {
+ return -EINVAL;
+ }
+
+ master_config.phase =
+ (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_CPHA)
+ ? kFLEXIO_SPI_ClockPhaseSecondEdge
+ : kFLEXIO_SPI_ClockPhaseFirstEdge;
+
+ master_config.baudRate_Bps = spi_cfg->frequency;
+ spi_flexio_master_init(config->flexio_spi, &master_config,
+ (SPI_MODE_GET(spi_cfg->operation) & SPI_MODE_CPOL), clock_freq);
+
+ FLEXIO_SPI_MasterTransferCreateHandle(config->flexio_spi, &data->handle,
+ spi_mcux_master_transfer_callback,
+ data);
+ /* No SetDummyData() for FlexIO_SPI */
+
+ data->ctx.config = spi_cfg;
+
+ return 0;
+}
+
+
+static int transceive(const struct device *dev,
+ const struct spi_config *spi_cfg,
+ const struct spi_buf_set *tx_bufs,
+ const struct spi_buf_set *rx_bufs,
+ bool asynchronous,
+ spi_callback_t cb,
+ void *userdata)
+{
+ const struct spi_mcux_flexio_config *config = dev->config;
+ struct spi_mcux_flexio_data *data = dev->data;
+ int ret;
+
+ spi_context_lock(&data->ctx, asynchronous, cb, userdata, spi_cfg);
+
+ nxp_flexio_lock(config->flexio_dev);
+ ret = spi_mcux_flexio_configure(dev, spi_cfg);
+ nxp_flexio_unlock(config->flexio_dev);
+ if (ret) {
+ goto out;
+ }
+
+ spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, 1);
+
+ spi_context_cs_control(&data->ctx, true);
+
+ nxp_flexio_lock(config->flexio_dev);
+ nxp_flexio_irq_disable(config->flexio_dev);
+
+ spi_mcux_transfer_next_packet(dev);
+
+ nxp_flexio_irq_enable(config->flexio_dev);
+ nxp_flexio_unlock(config->flexio_dev);
+
+ ret = spi_context_wait_for_completion(&data->ctx);
+out:
+ spi_context_release(&data->ctx, ret);
+
+ return ret;
+}
+
+static int spi_mcux_transceive(const struct device *dev,
+ const struct spi_config *spi_cfg,
+ const struct spi_buf_set *tx_bufs,
+ const struct spi_buf_set *rx_bufs)
+{
+ return transceive(dev, spi_cfg, tx_bufs, rx_bufs, false, NULL, NULL);
+}
+
+#ifdef CONFIG_SPI_ASYNC
+static int spi_mcux_transceive_async(const struct device *dev,
+ const struct spi_config *spi_cfg,
+ const struct spi_buf_set *tx_bufs,
+ const struct spi_buf_set *rx_bufs,
+ spi_callback_t cb,
+ void *userdata)
+{
+ return transceive(dev, spi_cfg, tx_bufs, rx_bufs, true, cb, userdata);
+}
+#endif /* CONFIG_SPI_ASYNC */
+
+static int spi_mcux_release(const struct device *dev,
+ const struct spi_config *spi_cfg)
+{
+ struct spi_mcux_flexio_data *data = dev->data;
+
+ spi_context_unlock_unconditionally(&data->ctx);
+
+ return 0;
+}
+
+static int spi_mcux_init(const struct device *dev)
+{
+ const struct spi_mcux_flexio_config *config = dev->config;
+ struct spi_mcux_flexio_data *data = dev->data;
+ int err;
+
+ err = nxp_flexio_child_attach(config->flexio_dev, config->child);
+ if (err < 0) {
+ return err;
+ }
+
+ err = spi_context_cs_configure_all(&data->ctx);
+ if (err < 0) {
+ return err;
+ }
+
+ spi_context_unlock_unconditionally(&data->ctx);
+
+ data->dev = dev;
+
+ /* TODO: DMA */
+
+ err = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
+ if (err) {
+ return err;
+ }
+
+ spi_context_unlock_unconditionally(&data->ctx);
+
+ return 0;
+}
+
+static const struct spi_driver_api spi_mcux_driver_api = {
+ .transceive = spi_mcux_transceive,
+#ifdef CONFIG_SPI_ASYNC
+ .transceive_async = spi_mcux_transceive_async,
+#endif
+ .release = spi_mcux_release,
+};
+
+#define SPI_MCUX_FLEXIO_SPI_INIT(n) \
+ PINCTRL_DT_INST_DEFINE(n); \
+ \
+ static FLEXIO_SPI_Type flexio_spi_##n = { \
+ .flexioBase = (FLEXIO_Type *)DT_REG_ADDR(DT_INST_PARENT(n)), \
+ .SDOPinIndex = DT_INST_PROP(n, sdo_pin), \
+ .SDIPinIndex = DT_INST_PROP(n, sdi_pin), \
+ .SCKPinIndex = DT_INST_PROP(n, sck_pin), \
+ }; \
+ \
+ static const struct nxp_flexio_child nxp_flexio_spi_child_##n = { \
+ .isr = spi_mcux_flexio_isr, \
+ .user_data = (void *)DEVICE_DT_INST_GET(n), \
+ .res = { \
+ .shifter_index = flexio_spi_##n.shifterIndex, \
+ .shifter_count = ARRAY_SIZE(flexio_spi_##n.shifterIndex), \
+ .timer_index = flexio_spi_##n.timerIndex, \
+ .timer_count = ARRAY_SIZE(flexio_spi_##n.timerIndex) \
+ } \
+ }; \
+ \
+ static const struct spi_mcux_flexio_config spi_mcux_flexio_config_##n = { \
+ .flexio_spi = &flexio_spi_##n, \
+ .flexio_dev = DEVICE_DT_GET(DT_INST_PARENT(n)), \
+ .pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \
+ .child = &nxp_flexio_spi_child_##n, \
+ }; \
+ \
+ static struct spi_mcux_flexio_data spi_mcux_flexio_data_##n = { \
+ SPI_CONTEXT_INIT_LOCK(spi_mcux_flexio_data_##n, ctx), \
+ SPI_CONTEXT_INIT_SYNC(spi_mcux_flexio_data_##n, ctx), \
+ SPI_CONTEXT_CS_GPIOS_INITIALIZE(DT_DRV_INST(n), ctx) \
+ }; \
+ \
+ DEVICE_DT_INST_DEFINE(n, &spi_mcux_init, NULL, \
+ &spi_mcux_flexio_data_##n, \
+ &spi_mcux_flexio_config_##n, POST_KERNEL, \
+ CONFIG_SPI_INIT_PRIORITY, \
+ &spi_mcux_driver_api); \
+
+DT_INST_FOREACH_STATUS_OKAY(SPI_MCUX_FLEXIO_SPI_INIT)