boards: mcxw23: Fix the compliance check issues
Fixed the indentation issue in dtsi files
Signed-off-by: Allen Zhang <chunfeng.zhang@nxp.com>
diff --git a/boards/nxp/frdm_mcxw23/frdm_mcxw23_common.dtsi b/boards/nxp/frdm_mcxw23/frdm_mcxw23_common.dtsi
index 5a9f1d6..205594e 100644
--- a/boards/nxp/frdm_mcxw23/frdm_mcxw23_common.dtsi
+++ b/boards/nxp/frdm_mcxw23/frdm_mcxw23_common.dtsi
@@ -20,7 +20,7 @@
zephyr,flash-controller = &iap;
};
- aliases{
+ aliases {
led0 = &red_led;
led1 = &green_led;
led2 = &blue_led;
@@ -82,17 +82,17 @@
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = /* Not a GPIO*/ /* AN */
- /* Not a GPIO*/ /* RST */
- <2 0 &gpio0 8 0>, /* CS */
- <3 0 &gpio0 10 0>, /* SCK */
- <4 0 &gpio0 7 0>, /* MISO */
- <5 0 &gpio0 6 0>, /* MOSI */
- <6 0 &gpio0 15 0>, /* PWM */
- <7 0 &gpio0 16 0>, /* INT */
- <8 0 &gpio0 3 0>, /* RX */
- <9 0 &gpio0 2 0>, /* TX */
- <10 0 &gpio0 14 0>, /* SCL */
- <11 0 &gpio0 13 0>; /* SDA */
+ /* Not a GPIO*/ /* RST */
+ <2 0 &gpio0 8 0>, /* CS */
+ <3 0 &gpio0 10 0>, /* SCK */
+ <4 0 &gpio0 7 0>, /* MISO */
+ <5 0 &gpio0 6 0>, /* MOSI */
+ <6 0 &gpio0 15 0>, /* PWM */
+ <7 0 &gpio0 16 0>, /* INT */
+ <8 0 &gpio0 3 0>, /* RX */
+ <9 0 &gpio0 2 0>, /* TX */
+ <10 0 &gpio0 14 0>, /* SCL */
+ <11 0 &gpio0 13 0>; /* SDA */
};
arduino_header: arduino-connector {
@@ -101,27 +101,27 @@
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <ARDUINO_HEADER_R3_A0 0 &gpio0 16 0>,
- <ARDUINO_HEADER_R3_A1 0 &gpio0 19 0>,
- <ARDUINO_HEADER_R3_A2 0 &gpio0 22 0>,
- <ARDUINO_HEADER_R3_A3 0 &gpio0 20 0>,
- <ARDUINO_HEADER_R3_A4 0 &gpio0 13 0>,
- <ARDUINO_HEADER_R3_A5 0 &gpio0 14 0>,
- <ARDUINO_HEADER_R3_D0 0 &gpio0 2 0>,
- <ARDUINO_HEADER_R3_D1 0 &gpio0 3 0>,
- <ARDUINO_HEADER_R3_D2 0 &gpio0 21 0>,
- <ARDUINO_HEADER_R3_D3 0 &gpio0 18 0>,
- <ARDUINO_HEADER_R3_D4 0 &gpio0 0 0>,
- <ARDUINO_HEADER_R3_D5 0 &gpio0 9 0>,
- <ARDUINO_HEADER_R3_D6 0 &gpio0 4 0>,
- <ARDUINO_HEADER_R3_D7 0 &gpio0 1 0>,
- <ARDUINO_HEADER_R3_D8 0 &gpio0 0 0>, /* D8 is not connected */
- <ARDUINO_HEADER_R3_D9 0 &gpio0 15 0>,
- <ARDUINO_HEADER_R3_D10 0 &gpio0 8 0>,
- <ARDUINO_HEADER_R3_D11 0 &gpio0 6 0>,
- <ARDUINO_HEADER_R3_D12 0 &gpio0 7 0>,
- <ARDUINO_HEADER_R3_D13 0 &gpio0 10 0>,
- <ARDUINO_HEADER_R3_D14 0 &gpio0 13 0>,
- <ARDUINO_HEADER_R3_D15 0 &gpio0 14 0>;
+ <ARDUINO_HEADER_R3_A1 0 &gpio0 19 0>,
+ <ARDUINO_HEADER_R3_A2 0 &gpio0 22 0>,
+ <ARDUINO_HEADER_R3_A3 0 &gpio0 20 0>,
+ <ARDUINO_HEADER_R3_A4 0 &gpio0 13 0>,
+ <ARDUINO_HEADER_R3_A5 0 &gpio0 14 0>,
+ <ARDUINO_HEADER_R3_D0 0 &gpio0 2 0>,
+ <ARDUINO_HEADER_R3_D1 0 &gpio0 3 0>,
+ <ARDUINO_HEADER_R3_D2 0 &gpio0 21 0>,
+ <ARDUINO_HEADER_R3_D3 0 &gpio0 18 0>,
+ <ARDUINO_HEADER_R3_D4 0 &gpio0 0 0>,
+ <ARDUINO_HEADER_R3_D5 0 &gpio0 9 0>,
+ <ARDUINO_HEADER_R3_D6 0 &gpio0 4 0>,
+ <ARDUINO_HEADER_R3_D7 0 &gpio0 1 0>,
+ <ARDUINO_HEADER_R3_D8 0 &gpio0 0 0>, /* D8 is not connected */
+ <ARDUINO_HEADER_R3_D9 0 &gpio0 15 0>,
+ <ARDUINO_HEADER_R3_D10 0 &gpio0 8 0>,
+ <ARDUINO_HEADER_R3_D11 0 &gpio0 6 0>,
+ <ARDUINO_HEADER_R3_D12 0 &gpio0 7 0>,
+ <ARDUINO_HEADER_R3_D13 0 &gpio0 10 0>,
+ <ARDUINO_HEADER_R3_D14 0 &gpio0 13 0>,
+ <ARDUINO_HEADER_R3_D15 0 &gpio0 14 0>;
};
};
diff --git a/boards/nxp/mcxw23_evk/mcxw23_evk_common.dtsi b/boards/nxp/mcxw23_evk/mcxw23_evk_common.dtsi
index 0561021..c21e8e2 100644
--- a/boards/nxp/mcxw23_evk/mcxw23_evk_common.dtsi
+++ b/boards/nxp/mcxw23_evk/mcxw23_evk_common.dtsi
@@ -20,7 +20,7 @@
zephyr,flash-controller = &iap;
};
- aliases{
+ aliases {
led0 = &red_led;
sw0 = &btn_wk;
sw1 = &btn_usr;
@@ -70,15 +70,15 @@
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = /* Not a GPIO*/ /* AN */
- /* Not a GPIO*/ /* RST */
- <2 0 &gpio0 0 0>, /* CS */
- <3 0 &gpio0 4 0>, /* SCK */
- <4 0 &gpio0 3 0>, /* MISO */
- <5 0 &gpio0 2 0>, /* MOSI */
- <8 0 &gpio0 2 0>, /* RX */
- <9 0 &gpio0 3 0>, /* TX */
- <10 0 &gpio0 3 0>, /* SCL */
- <11 0 &gpio0 2 0>; /* SDA */
+ /* Not a GPIO*/ /* RST */
+ <2 0 &gpio0 0 0>, /* CS */
+ <3 0 &gpio0 4 0>, /* SCK */
+ <4 0 &gpio0 3 0>, /* MISO */
+ <5 0 &gpio0 2 0>, /* MOSI */
+ <8 0 &gpio0 2 0>, /* RX */
+ <9 0 &gpio0 3 0>, /* TX */
+ <10 0 &gpio0 3 0>, /* SCL */
+ <11 0 &gpio0 2 0>; /* SDA */
};
arduino_header: arduino-connector {
@@ -87,21 +87,21 @@
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <ARDUINO_HEADER_R3_D0 0 &gpio0 2 0>,
- <ARDUINO_HEADER_R3_D1 0 &gpio0 3 0>,
- <ARDUINO_HEADER_R3_D2 0 &gpio0 0 0>, /* D2 is not connected */
- <ARDUINO_HEADER_R3_D3 0 &gpio0 0 0>, /* D3 is not connected */
- <ARDUINO_HEADER_R3_D4 0 &gpio0 0 0>, /* D4 is not connected */
- <ARDUINO_HEADER_R3_D5 0 &gpio0 0 0>, /* D5 is not connected */
- <ARDUINO_HEADER_R3_D6 0 &gpio0 0 0>, /* D6 is not connected */
- <ARDUINO_HEADER_R3_D7 0 &gpio0 0 0>, /* D7 is not connected */
- <ARDUINO_HEADER_R3_D8 0 &gpio0 0 0>, /* D8 is not connected */
- <ARDUINO_HEADER_R3_D9 0 &gpio0 0 0>, /* D9 is not connected */
- <ARDUINO_HEADER_R3_D10 0 &gpio0 0 0>,
- <ARDUINO_HEADER_R3_D11 0 &gpio0 2 0>,
- <ARDUINO_HEADER_R3_D12 0 &gpio0 3 0>,
- <ARDUINO_HEADER_R3_D13 0 &gpio0 4 0>,
- <ARDUINO_HEADER_R3_D14 0 &gpio0 2 0>,
- <ARDUINO_HEADER_R3_D15 0 &gpio0 3 0>;
+ <ARDUINO_HEADER_R3_D1 0 &gpio0 3 0>,
+ <ARDUINO_HEADER_R3_D2 0 &gpio0 0 0>, /* D2 is not connected */
+ <ARDUINO_HEADER_R3_D3 0 &gpio0 0 0>, /* D3 is not connected */
+ <ARDUINO_HEADER_R3_D4 0 &gpio0 0 0>, /* D4 is not connected */
+ <ARDUINO_HEADER_R3_D5 0 &gpio0 0 0>, /* D5 is not connected */
+ <ARDUINO_HEADER_R3_D6 0 &gpio0 0 0>, /* D6 is not connected */
+ <ARDUINO_HEADER_R3_D7 0 &gpio0 0 0>, /* D7 is not connected */
+ <ARDUINO_HEADER_R3_D8 0 &gpio0 0 0>, /* D8 is not connected */
+ <ARDUINO_HEADER_R3_D9 0 &gpio0 0 0>, /* D9 is not connected */
+ <ARDUINO_HEADER_R3_D10 0 &gpio0 0 0>,
+ <ARDUINO_HEADER_R3_D11 0 &gpio0 2 0>,
+ <ARDUINO_HEADER_R3_D12 0 &gpio0 3 0>,
+ <ARDUINO_HEADER_R3_D13 0 &gpio0 4 0>,
+ <ARDUINO_HEADER_R3_D14 0 &gpio0 2 0>,
+ <ARDUINO_HEADER_R3_D15 0 &gpio0 3 0>;
};
};
