boards: added missing arduino defines to nRF5340 Audio DK board
The nRF5340 Audio DK board definition was missing Arduino
Shield definitions.
Signed-off-by: Tim Sørensen <tims@demant.com>
diff --git a/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp.yaml b/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp.yaml
index 9c131a6..a4433e7 100644
--- a/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp.yaml
+++ b/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp.yaml
@@ -9,6 +9,10 @@
ram: 448
flash: 1024
supported:
+ - arduino_adc
+ - arduino_i2c
+ - arduino_serial
+ - arduino_spi
- gpio
- i2s
- spi
diff --git a/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp_common.dtsi b/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp_common.dtsi
index 6ad1591..278f785 100644
--- a/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp_common.dtsi
+++ b/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp_common.dtsi
@@ -25,6 +25,17 @@
};
};
+ arduino_adc: analog-connector {
+ compatible = "arduino,uno-adc";
+ #io-channel-cells = <1>;
+ io-channel-map = <0 &adc 1>, /* A0 = P0.4 = AIN1 */
+ <1 &adc 2>, /* A1 = P0.5 = AIN2 */
+ <2 &adc 4>, /* A2 = P0.6 = AIN4 */
+ <3 &adc 5>, /* A3 = P0.7 = AIN5 */
+ <4 &adc 6>, /* A4 = P0.25 = AIN6 */
+ <5 &adc 7>; /* A5 = P0.26 = AIN7 */
+ };
+
pmic {
compatible = "nordic,npm1100";
nordic,iset-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
@@ -120,7 +131,7 @@
pinctrl-names = "default", "sleep";
};
-&i2c1 {
+arduino_i2c: &i2c1 {
compatible = "nordic,nrf-twim";
status = "okay";
pinctrl-0 = <&i2c1_default>;
@@ -172,14 +183,15 @@
};
};
-&spi4 {
+arduino_spi: &spi4 {
compatible = "nordic,nrf-spim";
status = "okay";
- cs-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>, <&gpio0 17 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&arduino_header 16 GPIO_ACTIVE_LOW>,
+ <&gpio0 11 GPIO_ACTIVE_LOW>, <&gpio0 17 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&spi4_default>;
pinctrl-1 = <&spi4_sleep>;
pinctrl-names = "default", "sleep";
- sdhc0: sdhc@0 {
+ sdhc0: sdhc@1 {
compatible = "zephyr,sdhc-spi-slot";
reg = <0>;
status = "okay";
@@ -191,7 +203,7 @@
spi-max-frequency = <8000000>;
};
- cs47l63: cs47l63@1 {
+ cs47l63: cs47l63@2 {
compatible = "cirrus,cs47l63";
reg = <1>;
spi-max-frequency = <8000000>;
