drivers: convert to using newly introduced integer sized types
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
diff --git a/drivers/console/uart_console.c b/drivers/console/uart_console.c
index 3dbc453..c5380e4 100644
--- a/drivers/console/uart_console.c
+++ b/drivers/console/uart_console.c
@@ -132,7 +132,7 @@
#if defined(CONFIG_CONSOLE_HANDLER)
static struct k_fifo *avail_queue;
static struct k_fifo *lines_queue;
-static uint8_t (*completion_cb)(char *line, uint8_t len);
+static u8_t (*completion_cb)(char *line, u8_t len);
/* Control characters */
#define ESC 0x1b
@@ -148,7 +148,7 @@
#define ANSI_HOME 'H'
#define ANSI_DEL '~'
-static int read_uart(struct device *uart, uint8_t *buf, unsigned int size)
+static int read_uart(struct device *uart, u8_t *buf, unsigned int size)
{
int rx;
@@ -183,7 +183,7 @@
printk("\x1b[u");
}
-static void insert_char(char *pos, char c, uint8_t end)
+static void insert_char(char *pos, char c, u8_t end)
{
char tmp;
@@ -211,7 +211,7 @@
cursor_restore();
}
-static void del_char(char *pos, uint8_t end)
+static void del_char(char *pos, u8_t end)
{
uart_poll_out(uart_console_dev, '\b');
@@ -244,9 +244,9 @@
static atomic_t esc_state;
static unsigned int ansi_val, ansi_val_2;
-static uint8_t cur, end;
+static u8_t cur, end;
-static void handle_ansi(uint8_t byte, char *line)
+static void handle_ansi(u8_t byte, char *line)
{
if (atomic_test_and_clear_bit(&esc_state, ESC_ANSI_FIRST)) {
if (!isdigit(byte)) {
@@ -342,7 +342,7 @@
while (uart_irq_update(uart_console_dev) &&
uart_irq_is_pending(uart_console_dev)) {
static struct console_input *cmd;
- uint8_t byte;
+ u8_t byte;
int rx;
if (!uart_irq_rx_ready(uart_console_dev)) {
@@ -430,7 +430,7 @@
static void console_input_init(void)
{
- uint8_t c;
+ u8_t c;
uart_irq_rx_disable(uart_console_dev);
uart_irq_tx_disable(uart_console_dev);
@@ -446,7 +446,7 @@
}
void uart_register_input(struct k_fifo *avail, struct k_fifo *lines,
- uint8_t (*completion)(char *str, uint8_t len))
+ u8_t (*completion)(char *str, u8_t len))
{
avail_queue = avail;
lines_queue = lines;
@@ -492,7 +492,7 @@
#ifdef CONFIG_USB_UART_CONSOLE
while (1) {
- uint32_t dtr = 0;
+ u32_t dtr = 0;
uart_line_ctrl_get(uart_console_dev, LINE_CTRL_DTR, &dtr);
if (dtr) {
