drivers: convert to using newly introduced integer sized types
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
diff --git a/drivers/interrupt_controller/loapic_intr.c b/drivers/interrupt_controller/loapic_intr.c
index d2bf841..960353f 100644
--- a/drivers/interrupt_controller/loapic_intr.c
+++ b/drivers/interrupt_controller/loapic_intr.c
@@ -184,8 +184,8 @@
#define LOPIC_SUSPEND_BITS_REQD (ROUND_UP((LOAPIC_IRQ_COUNT * LOPIC_SSPND_BITS_PER_IRQ), 32))
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
#include <power.h>
-uint32_t loapic_suspend_buf[LOPIC_SUSPEND_BITS_REQD / 32] = {0};
-static uint32_t loapic_device_power_state = DEVICE_PM_ACTIVE_STATE;
+u32_t loapic_suspend_buf[LOPIC_SUSPEND_BITS_REQD / 32] = {0};
+static u32_t loapic_device_power_state = DEVICE_PM_ACTIVE_STATE;
#endif
@@ -202,7 +202,7 @@
static int _loapic_init(struct device *unused)
{
ARG_UNUSED(unused);
- int32_t loApicMaxLvt; /* local APIC Max LVT */
+ s32_t loApicMaxLvt; /* local APIC Max LVT */
/* enable the Local APIC */
sys_write32(sys_read32(CONFIG_LOAPIC_BASE_ADDRESS + LOAPIC_SVR)
@@ -282,7 +282,7 @@
)
{
volatile int *pLvt; /* pointer to local vector table */
- int32_t oldLevel; /* previous interrupt lock level */
+ s32_t oldLevel; /* previous interrupt lock level */
/*
* The following mappings are used:
@@ -321,7 +321,7 @@
void _loapic_irq_enable(unsigned int irq)
{
volatile int *pLvt; /* pointer to local vector table */
- int32_t oldLevel; /* previous interrupt lock level */
+ s32_t oldLevel; /* previous interrupt lock level */
/*
* See the comments in _LoApicLvtVecSet() regarding IRQ to LVT mappings
@@ -352,7 +352,7 @@
void _loapic_irq_disable(unsigned int irq)
{
volatile int *pLvt; /* pointer to local vector table */
- int32_t oldLevel; /* previous interrupt lock level */
+ s32_t oldLevel; /* previous interrupt lock level */
/*
* See the comments in _LoApicLvtVecSet() regarding IRQ to LVT mappings
@@ -479,17 +479,17 @@
* Implements the driver control management functionality
* the *context may include IN data or/and OUT data
*/
-static int loapic_device_ctrl(struct device *port, uint32_t ctrl_command,
+static int loapic_device_ctrl(struct device *port, u32_t ctrl_command,
void *context)
{
if (ctrl_command == DEVICE_PM_SET_POWER_STATE) {
- if (*((uint32_t *)context) == DEVICE_PM_SUSPEND_STATE) {
+ if (*((u32_t *)context) == DEVICE_PM_SUSPEND_STATE) {
return loapic_suspend(port);
- } else if (*((uint32_t *)context) == DEVICE_PM_ACTIVE_STATE) {
+ } else if (*((u32_t *)context) == DEVICE_PM_ACTIVE_STATE) {
return loapic_resume(port);
}
} else if (ctrl_command == DEVICE_PM_GET_POWER_STATE) {
- *((uint32_t *)context) = loapic_device_power_state;
+ *((u32_t *)context) = loapic_device_power_state;
return 0;
}
