boards: lilygo: t_oi_plus: initial support
initial support for the Lilygo TTGO T-OI-PLUS ESP32-C3 board
Signed-off-by: aisuneko icecat <iceneko@protonmail.ch>
Co-authored-by: Benjamin Cabé <kartben@gmail.com>
diff --git a/boards/lilygo/ttgo_toiplus/Kconfig b/boards/lilygo/ttgo_toiplus/Kconfig
new file mode 100644
index 0000000..c6a99b1
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/Kconfig
@@ -0,0 +1,6 @@
+# Copyright (c) 2024 Espressif Systems (Shanghai) Co., Ltd.
+# SPDX-License-Identifier: Apache-2.0
+
+config HEAP_MEM_POOL_ADD_SIZE_BOARD
+ int
+ default 4096
diff --git a/boards/lilygo/ttgo_toiplus/Kconfig.sysbuild b/boards/lilygo/ttgo_toiplus/Kconfig.sysbuild
new file mode 100644
index 0000000..3a2d17a
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/Kconfig.sysbuild
@@ -0,0 +1,10 @@
+# Copyright (c) 2023 Espressif Systems (Shanghai) Co., Ltd.
+# SPDX-License-Identifier: Apache-2.0
+
+choice BOOTLOADER
+ default BOOTLOADER_MCUBOOT
+endchoice
+
+choice BOOT_SIGNATURE_TYPE
+ default BOOT_SIGNATURE_TYPE_NONE
+endchoice
diff --git a/boards/lilygo/ttgo_toiplus/Kconfig.ttgo_toiplus b/boards/lilygo/ttgo_toiplus/Kconfig.ttgo_toiplus
new file mode 100644
index 0000000..ddca709
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/Kconfig.ttgo_toiplus
@@ -0,0 +1,5 @@
+# Copyright 2025 aisuneko icecat <iceneko@protonmail.ch>
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_TTGO_TOIPLUS
+ select SOC_ESP32C3_FN4
diff --git a/boards/lilygo/ttgo_toiplus/board.cmake b/boards/lilygo/ttgo_toiplus/board.cmake
new file mode 100644
index 0000000..2f04d1f
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/board.cmake
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: Apache-2.0
+
+if(NOT "${OPENOCD}" MATCHES "^${ESPRESSIF_TOOLCHAIN_PATH}/.*")
+ set(OPENOCD OPENOCD-NOTFOUND)
+endif()
+find_program(OPENOCD openocd PATHS ${ESPRESSIF_TOOLCHAIN_PATH}/openocd-esp32/bin NO_DEFAULT_PATH)
+
+include(${ZEPHYR_BASE}/boards/common/esp32.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
diff --git a/boards/lilygo/ttgo_toiplus/board.yml b/boards/lilygo/ttgo_toiplus/board.yml
new file mode 100644
index 0000000..e5295b2
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/board.yml
@@ -0,0 +1,6 @@
+board:
+ name: ttgo_toiplus
+ full_name: TTGO T-OI-PLUS
+ vendor: lilygo
+ socs:
+ - name: esp32c3
diff --git a/boards/lilygo/ttgo_toiplus/doc/img/ttgo_toiplus.webp b/boards/lilygo/ttgo_toiplus/doc/img/ttgo_toiplus.webp
new file mode 100644
index 0000000..115cc04
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/doc/img/ttgo_toiplus.webp
Binary files differ
diff --git a/boards/lilygo/ttgo_toiplus/doc/index.rst b/boards/lilygo/ttgo_toiplus/doc/index.rst
new file mode 100644
index 0000000..3ea6b50
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/doc/index.rst
@@ -0,0 +1,199 @@
+.. zephyr:board:: ttgo_toiplus
+
+Overview
+********
+
+Lilygo TTGO T-OI-PLUS is an mini IoT development board based on
+Espressif's ESP32-C3 WiFi/Bluetooth dual-mode chip.
+
+It features the following integrated components:
+
+- ESP32-C3 SoC (RISC-V 160MHz single core, 400KB SRAM, Wi-Fi, Bluetooth)
+- on board Grove connector
+- USB-C connector for power and communication (on board serial)
+- optional 18340 Li-ion battery holder
+- LED
+
+Functional Description
+**********************
+This board is based on the ESP32-C3 with 4MB of flash, WiFi and BLE support. It
+has an USB-C port for programming and debugging, integrated battery charging
+and an Grove connector.
+
+Connections and IOs
+===================
+
+.. zephyr:board-supported-hw::
+
+(Note: the above UART interface also supports connecting through USB.)
+
+Start Application Development
+*****************************
+
+Before powering up your Lilygo TTGO T-OI-PLUS, please make sure that the board is in good
+condition with no obvious signs of damage.
+
+System requirements
+*******************
+
+Prerequisites
+=============
+
+Espressif HAL requires WiFi and Bluetooth binary blobs in order work. Run the command
+below to retrieve those files.
+
+.. code-block:: console
+
+ west blobs fetch hal_espressif
+
+.. note::
+
+ It is recommended running the command above after :file:`west update`.
+
+Building & Flashing
+*******************
+
+Simple boot
+===========
+
+The board could be loaded using the single binary image, without 2nd stage bootloader.
+It is the default option when building the application without additional configuration.
+
+.. note::
+
+ Simple boot does not provide any security features nor OTA updates.
+
+MCUboot bootloader
+==================
+
+User may choose to use MCUboot bootloader instead. In that case the bootloader
+must be built (and flashed) at least once.
+
+There are two options to be used when building an application:
+
+1. Sysbuild
+2. Manual build
+
+.. note::
+
+ User can select the MCUboot bootloader by adding the following line
+ to the board default configuration file.
+
+ .. code:: cfg
+
+ CONFIG_BOOTLOADER_MCUBOOT=y
+
+Sysbuild
+========
+
+The sysbuild makes possible to build and flash all necessary images needed to
+bootstrap the board with the ESP32-C3 SoC.
+
+To build the sample application using sysbuild use the command:
+
+.. zephyr-app-commands::
+ :tool: west
+ :zephyr-app: samples/hello_world
+ :board: ttgo_toiplus
+ :goals: build
+ :west-args: --sysbuild
+ :compact:
+
+By default, the ESP32-C3 sysbuild creates bootloader (MCUboot) and application
+images. But it can be configured to create other kind of images.
+
+Build directory structure created by sysbuild is different from traditional
+Zephyr build. Output is structured by the domain subdirectories:
+
+.. code-block::
+
+ build/
+ ├── hello_world
+ │ └── zephyr
+ │ ├── zephyr.elf
+ │ └── zephyr.bin
+ ├── mcuboot
+ │ └── zephyr
+ │ ├── zephyr.elf
+ │ └── zephyr.bin
+ └── domains.yaml
+
+.. note::
+
+ With ``--sysbuild`` option the bootloader will be re-build and re-flash
+ every time the pristine build is used.
+
+For more information about the system build please read the :ref:`sysbuild` documentation.
+
+Manual build
+============
+
+During the development cycle, it is intended to build & flash as quickly possible.
+For that reason, images can be built one at a time using traditional build.
+
+The instructions following are relevant for both manual build and sysbuild.
+The only difference is the structure of the build directory.
+
+.. note::
+
+ Remember that bootloader (MCUboot) needs to be flash at least once.
+
+Build and flash applications as usual (see :ref:`build_an_application` and
+:ref:`application_run` for more details).
+
+.. zephyr-app-commands::
+ :zephyr-app: samples/hello_world
+ :board: ttgo_toiplus
+ :goals: build
+
+The usual ``flash`` target will work with the ``ttgo_toiplus`` board target.
+Here is an example for the :zephyr:code-sample:`hello_world` application.
+
+.. zephyr-app-commands::
+ :zephyr-app: samples/hello_world
+ :board: ttgo_toiplus
+ :goals: flash
+
+You can also open the serial monitor using the following command:
+
+.. code-block:: shell
+
+ west espressif monitor
+
+After the board has automatically reset and booted, you should see the following
+message in the monitor:
+
+.. code-block:: console
+
+ ***** Booting Zephyr OS vx.x.x-xxx-gxxxxxxxxxxxx *****
+ Hello World! ttgo_toiplus
+
+Sample applications
+===================
+
+The following samples will run out of the box on the TTGO T-OI-PLUS board.
+
+To build the blinky sample:
+
+.. zephyr-app-commands::
+ :tool: west
+ :zephyr-app: samples/basic/blinky
+ :board: ttgo_toiplus
+ :goals: build
+
+To build the bluetooth beacon sample:
+
+.. zephyr-app-commands::
+ :tool: west
+ :zephyr-app: samples/bluetooth/beacon
+ :board: ttgo_toiplus
+ :goals: build
+
+
+Related Documents
+*****************
+.. _`Lilygo TTGO T-OI-PLUS schematic`: https://github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS/blob/main/schematic/T-OI_PLUS_Schematic.pdf
+.. _`Lilygo github repo`: https://github.com/Xinyuan-LilyGO
+.. _`Espressif ESP32-C3 datasheet`: https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf
+.. _`Espressif ESP32-C3 technical reference manual`: https://www.espressif.com/sites/default/files/documentation/esp32-c3_technical_reference_manual_en.pdf
+.. _`OpenOCD ESP32`: https://github.com/espressif/openocd-esp32/releases
diff --git a/boards/lilygo/ttgo_toiplus/support/openocd.cfg b/boards/lilygo/ttgo_toiplus/support/openocd.cfg
new file mode 100644
index 0000000..02754ff
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/support/openocd.cfg
@@ -0,0 +1,6 @@
+set ESP_RTOS none
+
+source [find interface/esp_usb_jtag.cfg]
+
+source [find target/esp32c3.cfg]
+adapter_khz 5000
diff --git a/boards/lilygo/ttgo_toiplus/ttgo_toiplus-pinctrl.dtsi b/boards/lilygo/ttgo_toiplus/ttgo_toiplus-pinctrl.dtsi
new file mode 100644
index 0000000..874d3c9
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/ttgo_toiplus-pinctrl.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2024 Lothar Felten <lothar.felten@gmail.com>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include <zephyr/dt-bindings/pinctrl/esp-pinctrl-common.h>
+#include <dt-bindings/pinctrl/esp32c3-pinctrl.h>
+#include <zephyr/dt-bindings/pinctrl/esp32c3-gpio-sigmap.h>
+
+&pinctrl {
+ uart0_default: uart0_default {
+ group1 {
+ pinmux = <UART0_TX_GPIO21>;
+ output-high;
+ };
+
+ group2 {
+ pinmux = <UART0_RX_GPIO20>;
+ bias-pull-up;
+ };
+ };
+
+ spim2_default: spim2_default {
+ group1 {
+ pinmux = <SPIM2_MISO_GPIO5>,
+ <SPIM2_SCLK_GPIO4>;
+ };
+
+ /* GPIO6 is CS */
+
+ group2 {
+ pinmux = <SPIM2_MOSI_GPIO7>;
+ output-low;
+ };
+ };
+
+ i2c0_default: i2c0_default {
+ group1 {
+ pinmux = <I2C0_SDA_GPIO2>,
+ <I2C0_SCL_GPIO8>;
+ bias-pull-up;
+ drive-open-drain;
+ output-high;
+ };
+ };
+
+ twai_default: twai_default {
+ group1 {
+ pinmux = <TWAI_TX_GPIO0>,
+ <TWAI_RX_GPIO10>;
+ };
+ };
+};
diff --git a/boards/lilygo/ttgo_toiplus/ttgo_toiplus.dts b/boards/lilygo/ttgo_toiplus/ttgo_toiplus.dts
new file mode 100644
index 0000000..6db7d4c
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/ttgo_toiplus.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2025 aisuneko icecat <iceneko@protonmail.ch>
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/dts-v1/;
+
+#include <espressif/esp32c3/esp32c3_common.dtsi>
+#include "ttgo_toiplus-pinctrl.dtsi"
+#include <espressif/partitions_0x0_default.dtsi>
+
+/ {
+ model = "Lilygo TTGO T-OI-PLUS";
+ compatible = "lilygo,ttgo-toiplus";
+
+ aliases {
+ led0 = &green_led;
+ i2c-0 = &i2c0;
+ watchdog0 = &wdt0;
+ };
+
+ chosen {
+ zephyr,sram = &sram1;
+ zephyr,console = &uart0;
+ zephyr,shell-uart = &uart0;
+ zephyr,flash = &flash0;
+ zephyr,code-partition = &slot0_partition;
+ zephyr,bt-hci = &esp32_bt_hci;
+ zephyr,canbus = &twai;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green_led: led_0 {
+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ label = "Green - LED0";
+ };
+ };
+};
+
+&flash0 {
+ reg = <0x0 DT_SIZE_M(4)>;
+};
+
+&uart0 {
+ status = "okay";
+ current-speed = <115200>;
+ pinctrl-0 = <&uart0_default>;
+ pinctrl-names = "default";
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <I2C_BITRATE_STANDARD>;
+ pinctrl-0 = <&i2c0_default>;
+ pinctrl-names = "default";
+};
+
+&trng0 {
+ status = "okay";
+};
+
+&spi2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ pinctrl-0 = <&spim2_default>;
+ pinctrl-names = "default";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&wdt0 {
+ status = "okay";
+};
+
+&timer0 {
+ status = "okay";
+};
+
+&timer1 {
+ status = "okay";
+};
+
+&twai {
+ status = "okay";
+ pinctrl-0 = <&twai_default>;
+ pinctrl-names = "default";
+};
+
+&wifi {
+ status = "okay";
+};
+
+&esp32_bt_hci {
+ status = "okay";
+};
diff --git a/boards/lilygo/ttgo_toiplus/ttgo_toiplus.yaml b/boards/lilygo/ttgo_toiplus/ttgo_toiplus.yaml
new file mode 100644
index 0000000..7464727
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/ttgo_toiplus.yaml
@@ -0,0 +1,14 @@
+identifier: ttgo_toiplus
+name: TTGO T-OI-PLUS
+type: mcu
+arch: riscv
+toolchain:
+ - zephyr
+supported:
+ - gpio
+ - i2c
+ - spi
+ - uart
+ - watchdog
+ - can
+vendor: lilygo
diff --git a/boards/lilygo/ttgo_toiplus/ttgo_toiplus_defconfig b/boards/lilygo/ttgo_toiplus/ttgo_toiplus_defconfig
new file mode 100644
index 0000000..187793c
--- /dev/null
+++ b/boards/lilygo/ttgo_toiplus/ttgo_toiplus_defconfig
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_CONSOLE=y
+CONFIG_SERIAL=y
+CONFIG_UART_CONSOLE=y
+CONFIG_GPIO=y
