boards: arm: stm32: clean up dts after clock conversion
Mass conversion of STM32 boards to dts based clock configuration has
left some minor whitespace issues. Fix these and some other whitespaces
in the affected files.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
diff --git a/boards/arm/disco_l475_iot1/disco_l475_iot1.dts b/boards/arm/disco_l475_iot1/disco_l475_iot1.dts
index 591a966..d7bd251 100644
--- a/boards/arm/disco_l475_iot1/disco_l475_iot1.dts
+++ b/boards/arm/disco_l475_iot1/disco_l475_iot1.dts
@@ -50,7 +50,7 @@
};
};
-&clk_hsi{
+&clk_hsi {
status = "okay";
};
diff --git a/boards/arm/mikroe_clicker_2/mikroe_clicker_2.dts b/boards/arm/mikroe_clicker_2/mikroe_clicker_2.dts
index 837adb0..d33726c 100644
--- a/boards/arm/mikroe_clicker_2/mikroe_clicker_2.dts
+++ b/boards/arm/mikroe_clicker_2/mikroe_clicker_2.dts
@@ -20,7 +20,6 @@
zephyr,ccm = &ccm0;
};
-
leds {
compatible = "gpio-leds";
ld1: led_1 {
@@ -102,7 +101,6 @@
status = "okay";
};
-
&spi2 {
pinctrl-0 = <&spi2_sck_pb13 &spi2_miso_pb14 &spi2_mosi_pb15>;
cs-gpios = <&gpioe 11 GPIO_ACTIVE_LOW>;
@@ -130,7 +128,6 @@
pinctrl-0 = <&adc1_in2_pa2 &adc1_in3_pa3>;
};
-
mikrobus_1_i2c: &i2c3 {};
mikrobus_1_spi: &spi3 {};
diff --git a/boards/arm/nucleo_f303k8/nucleo_f303k8.dts b/boards/arm/nucleo_f303k8/nucleo_f303k8.dts
index e17c311..27ce90f 100644
--- a/boards/arm/nucleo_f303k8/nucleo_f303k8.dts
+++ b/boards/arm/nucleo_f303k8/nucleo_f303k8.dts
@@ -74,7 +74,6 @@
status = "okay";
};
-
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
status = "okay";
diff --git a/boards/arm/nucleo_f401re/nucleo_f401re.dts b/boards/arm/nucleo_f401re/nucleo_f401re.dts
index 0cc4ea5..024097b 100644
--- a/boards/arm/nucleo_f401re/nucleo_f401re.dts
+++ b/boards/arm/nucleo_f401re/nucleo_f401re.dts
@@ -52,7 +52,7 @@
};
};
-&clk_hse{
+&clk_hse {
hse-bypass;
clock-frequency = <DT_FREQ_M(8)>; /* STLink 8MHz clock */
status = "okay";
diff --git a/boards/arm/nucleo_f411re/nucleo_f411re.dts b/boards/arm/nucleo_f411re/nucleo_f411re.dts
index 53551f6..fdc2f33 100644
--- a/boards/arm/nucleo_f411re/nucleo_f411re.dts
+++ b/boards/arm/nucleo_f411re/nucleo_f411re.dts
@@ -42,7 +42,7 @@
};
};
-&clk_hse{
+&clk_hse {
hse-bypass;
clock-frequency = <DT_FREQ_M(8)>; /* STLink 8MHz clock */
status = "okay";
diff --git a/boards/arm/nucleo_f429zi/nucleo_f429zi.dts b/boards/arm/nucleo_f429zi/nucleo_f429zi.dts
index 162ba3a..4401e57 100644
--- a/boards/arm/nucleo_f429zi/nucleo_f429zi.dts
+++ b/boards/arm/nucleo_f429zi/nucleo_f429zi.dts
@@ -77,7 +77,6 @@
apb2-prescaler = <2>;
};
-
&adc1 {
pinctrl-0 = <&adc1_in0_pa0>;
status = "okay";
diff --git a/boards/arm/nucleo_g071rb/nucleo_g071rb.dts b/boards/arm/nucleo_g071rb/nucleo_g071rb.dts
index cf71ae6..96aabef 100644
--- a/boards/arm/nucleo_g071rb/nucleo_g071rb.dts
+++ b/boards/arm/nucleo_g071rb/nucleo_g071rb.dts
@@ -43,7 +43,7 @@
};
};
-&clk_hsi{
+&clk_hsi {
status = "okay";
};
diff --git a/boards/arm/nucleo_g431rb/nucleo_g431rb.dts b/boards/arm/nucleo_g431rb/nucleo_g431rb.dts
index fe6240c..89bd889 100644
--- a/boards/arm/nucleo_g431rb/nucleo_g431rb.dts
+++ b/boards/arm/nucleo_g431rb/nucleo_g431rb.dts
@@ -51,7 +51,7 @@
};
};
-&clk_hse{
+&clk_hse {
clock-frequency = <DT_FREQ_M(24)>;
status = "okay";
};
diff --git a/boards/arm/nucleo_h753zi/nucleo_h753zi.dts b/boards/arm/nucleo_h753zi/nucleo_h753zi.dts
index 44efa9d..02a1422 100644
--- a/boards/arm/nucleo_h753zi/nucleo_h753zi.dts
+++ b/boards/arm/nucleo_h753zi/nucleo_h753zi.dts
@@ -58,7 +58,6 @@
};
};
-
&clk_hse {
hse-bypass;
clock-frequency = <DT_FREQ_M(8)>; /* STLink 8MHz clock */
diff --git a/boards/arm/nucleo_l053r8/nucleo_l053r8.dts b/boards/arm/nucleo_l053r8/nucleo_l053r8.dts
index 414b305..9f6a3ec 100644
--- a/boards/arm/nucleo_l053r8/nucleo_l053r8.dts
+++ b/boards/arm/nucleo_l053r8/nucleo_l053r8.dts
@@ -43,10 +43,10 @@
};
};
-&clk_hse{
- status = "okay";
- clock-frequency = <DT_FREQ_M(8)>;
+&clk_hse {
hse-bypass;
+ clock-frequency = <DT_FREQ_M(8)>; /* STLink 8MHz clock */
+ status = "okay";
};
&pll {
@@ -64,7 +64,6 @@
apb2-prescaler = <1>;
};
-
/* Due to limited available memory, don't enable gpiod and gpiof */
/* (Test cases fail due to 'SRAM' region overflow) */
&gpiod {status = "disabled";};
diff --git a/boards/arm/nucleo_l476rg/nucleo_l476rg.dts b/boards/arm/nucleo_l476rg/nucleo_l476rg.dts
index b0b477c..304bdde 100644
--- a/boards/arm/nucleo_l476rg/nucleo_l476rg.dts
+++ b/boards/arm/nucleo_l476rg/nucleo_l476rg.dts
@@ -63,7 +63,7 @@
};
};
-&clk_hsi{
+&clk_hsi {
status = "okay";
};
@@ -135,7 +135,6 @@
status = "okay";
};
-
&timers2 {
status = "okay";
diff --git a/boards/arm/nucleo_l552ze_q/nucleo_l552ze_q-common.dtsi b/boards/arm/nucleo_l552ze_q/nucleo_l552ze_q-common.dtsi
index 4f248fe..3df3112 100644
--- a/boards/arm/nucleo_l552ze_q/nucleo_l552ze_q-common.dtsi
+++ b/boards/arm/nucleo_l552ze_q/nucleo_l552ze_q-common.dtsi
@@ -9,7 +9,7 @@
#include "arduino_r3_connector.dtsi"
/ {
- leds {
+ leds {
compatible = "gpio-leds";
green_led_1: led_1 {
gpios = <&gpioa 5 GPIO_ACTIVE_HIGH>;
@@ -34,7 +34,7 @@
};
};
-&clk_msi{
+&clk_msi {
status = "okay";
msi-range = <6>;
};
diff --git a/boards/arm/nucleo_wb55rg/nucleo_wb55rg.dts b/boards/arm/nucleo_wb55rg/nucleo_wb55rg.dts
index 925224b..6236211 100644
--- a/boards/arm/nucleo_wb55rg/nucleo_wb55rg.dts
+++ b/boards/arm/nucleo_wb55rg/nucleo_wb55rg.dts
@@ -83,12 +83,11 @@
};
};
-
-&clk_hse{
+&clk_hse {
status = "okay";
};
-&clk_lse{
+&clk_lse {
status = "okay";
};
diff --git a/boards/arm/ronoth_lodev/ronoth_lodev.dts b/boards/arm/ronoth_lodev/ronoth_lodev.dts
index bf464d5..5bdcca7 100644
--- a/boards/arm/ronoth_lodev/ronoth_lodev.dts
+++ b/boards/arm/ronoth_lodev/ronoth_lodev.dts
@@ -141,7 +141,6 @@
status = "okay";
};
-
&iwdg {
status = "okay";
};
diff --git a/boards/arm/stm32f429i_disc1/stm32f429i_disc1.dts b/boards/arm/stm32f429i_disc1/stm32f429i_disc1.dts
index 9e8da1d..f263aaf 100644
--- a/boards/arm/stm32f429i_disc1/stm32f429i_disc1.dts
+++ b/boards/arm/stm32f429i_disc1/stm32f429i_disc1.dts
@@ -102,8 +102,6 @@
clock-frequency = <I2C_BITRATE_FAST>;
};
-
-
&spi5 {
pinctrl-0 = <&spi5_nss_pf6 &spi5_sck_pf7
&spi5_miso_pf8 &spi5_mosi_pf9>;
diff --git a/boards/arm/stm32l562e_dk/stm32l562e_dk_common.dtsi b/boards/arm/stm32l562e_dk/stm32l562e_dk_common.dtsi
index 73c7f31..4a81554 100644
--- a/boards/arm/stm32l562e_dk/stm32l562e_dk_common.dtsi
+++ b/boards/arm/stm32l562e_dk/stm32l562e_dk_common.dtsi
@@ -51,13 +51,13 @@
};
};
-&clk_msi{
+&clk_msi {
status = "okay";
msi-range = <6>;
msi-pll-mode;
};
-&clk_lse{
+&clk_lse {
status = "okay";
};
