doc: Update to Zephyr SDK 0.15.2
Update the Getting Started Guide and the Zephyr SDK documentation to
point to the Zephyr SDK 0.15.2 release.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
diff --git a/doc/develop/getting_started/index.rst b/doc/develop/getting_started/index.rst
index ceb9e38..5a139d6 100644
--- a/doc/develop/getting_started/index.rst
+++ b/doc/develop/getting_started/index.rst
@@ -502,8 +502,8 @@
.. code-block:: bash
cd ~
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_linux-x86_64.tar.gz
- wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/sha256.sum | shasum --check --ignore-missing
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_linux-x86_64.tar.gz
+ wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/sha256.sum | shasum --check --ignore-missing
If your host architecture is 64-bit ARM (for example, Raspberry Pi), replace ``x86_64``
with ``aarch64`` in order to download the 64-bit ARM Linux SDK.
@@ -512,7 +512,7 @@
.. code-block:: bash
- tar xvf zephyr-sdk-0.15.1_linux-x86_64.tar.gz
+ tar xvf zephyr-sdk-0.15.2_linux-x86_64.tar.gz
.. note::
It is recommended to extract the Zephyr SDK bundle at one of the following locations:
@@ -524,15 +524,15 @@
* ``/opt``
* ``/usr/local``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``$HOME``, the resulting installation path will be
- ``$HOME/zephyr-sdk-0.15.1``.
+ ``$HOME/zephyr-sdk-0.15.2``.
#. Run the Zephyr SDK bundle setup script:
.. code-block:: bash
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
./setup.sh
.. note::
@@ -546,7 +546,7 @@
.. code-block:: bash
- sudo cp ~/zephyr-sdk-0.15.1/sysroots/x86_64-pokysdk-linux/usr/share/openocd/contrib/60-openocd.rules /etc/udev/rules.d
+ sudo cp ~/zephyr-sdk-0.15.2/sysroots/x86_64-pokysdk-linux/usr/share/openocd/contrib/60-openocd.rules /etc/udev/rules.d
sudo udevadm control --reload
.. group-tab:: macOS
@@ -559,8 +559,8 @@
.. code-block:: bash
cd ~
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_macos-x86_64.tar.gz
- wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/sha256.sum | shasum --check --ignore-missing
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_macos-x86_64.tar.gz
+ wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/sha256.sum | shasum --check --ignore-missing
If your host architecture is 64-bit ARM (Apple Silicon, also known as M1), replace
``x86_64`` with ``aarch64`` in order to download the 64-bit ARM macOS SDK.
@@ -569,7 +569,7 @@
.. code-block:: bash
- tar xvf zephyr-sdk-0.15.1_macos-x86_64.tar.gz
+ tar xvf zephyr-sdk-0.15.2_macos-x86_64.tar.gz
.. note::
It is recommended to extract the Zephyr SDK bundle at one of the following locations:
@@ -581,15 +581,15 @@
* ``/opt``
* ``/usr/local``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``$HOME``, the resulting installation path will be
- ``$HOME/zephyr-sdk-0.15.1``.
+ ``$HOME/zephyr-sdk-0.15.2``.
#. Run the Zephyr SDK bundle setup script:
.. code-block:: bash
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
./setup.sh
.. note::
@@ -610,13 +610,13 @@
.. code-block:: console
cd %HOMEPATH%
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_windows-x86_64.zip
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_windows-x86_64.zip
#. Extract the Zephyr SDK bundle archive:
.. code-block:: console
- unzip zephyr-sdk-0.15.1_windows-x86_64.zip
+ unzip zephyr-sdk-0.15.2_windows-x86_64.zip
.. note::
It is recommended to extract the Zephyr SDK bundle at one of the following locations:
@@ -624,15 +624,15 @@
* ``%HOMEPATH%``
* ``%PROGRAMFILES%``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``%HOMEPATH%``, the resulting installation path will be
- ``%HOMEPATH%\zephyr-sdk-0.15.1``.
+ ``%HOMEPATH%\zephyr-sdk-0.15.2``.
#. Run the Zephyr SDK bundle setup script:
.. code-block:: console
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
setup.cmd
.. note::
diff --git a/doc/develop/getting_started/installation_linux.rst b/doc/develop/getting_started/installation_linux.rst
index 15b23fc..706b6ef 100644
--- a/doc/develop/getting_started/installation_linux.rst
+++ b/doc/develop/getting_started/installation_linux.rst
@@ -232,10 +232,10 @@
.. code-block:: bash
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_linux-x86_64.tar.gz
- wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/sha256.sum | shasum --check --ignore-missing
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_linux-x86_64.tar.gz
+ wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/sha256.sum | shasum --check --ignore-missing
- You can change ``0.15.1`` to another version if needed; the `Zephyr SDK
+ You can change ``0.15.2`` to another version if needed; the `Zephyr SDK
Releases`_ page contains all available SDK releases.
If your host architecture is 64-bit ARM (for example, Raspberry Pi), replace
@@ -246,13 +246,13 @@
.. code-block:: bash
cd <sdk download directory>
- tar xvf zephyr-sdk-0.15.1_linux-x86_64.tar.gz
+ tar xvf zephyr-sdk-0.15.2_linux-x86_64.tar.gz
#. Run the Zephyr SDK bundle setup script:
.. code-block:: bash
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
./setup.sh
If this fails, make sure Zephyr's dependencies were installed as described
@@ -271,9 +271,9 @@
* ``/opt``
* ``/usr/local``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``$HOME``, the resulting installation path will be
- ``$HOME/zephyr-sdk-0.15.1``.
+ ``$HOME/zephyr-sdk-0.15.2``.
If you install the Zephyr SDK outside any of these locations, you must
register the Zephyr SDK in the CMake package registry by running the setup
diff --git a/doc/develop/toolchains/zephyr_sdk.rst b/doc/develop/toolchains/zephyr_sdk.rst
index e976d59..52af0cf 100644
--- a/doc/develop/toolchains/zephyr_sdk.rst
+++ b/doc/develop/toolchains/zephyr_sdk.rst
@@ -65,10 +65,10 @@
.. code-block:: bash
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_linux-x86_64.tar.gz
- wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/sha256.sum | shasum --check --ignore-missing
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_linux-x86_64.tar.gz
+ wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/sha256.sum | shasum --check --ignore-missing
- You can change ``0.15.1`` to another version if needed; the `Zephyr SDK
+ You can change ``0.15.2`` to another version if needed; the `Zephyr SDK
Releases`_ page contains all available SDK releases.
If your host architecture is 64-bit ARM (for example, Raspberry Pi), replace
@@ -79,13 +79,13 @@
.. code-block:: bash
cd <sdk download directory>
- tar xvf zephyr-sdk-0.15.1_linux-x86_64.tar.gz
+ tar xvf zephyr-sdk-0.15.2_linux-x86_64.tar.gz
#. Run the Zephyr SDK bundle setup script:
.. code-block:: bash
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
./setup.sh
If this fails, make sure Zephyr's dependencies were installed as described
@@ -105,9 +105,9 @@
* ``/opt``
* ``/usr/local``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``$HOME``, the resulting installation path will be
- ``$HOME/zephyr-sdk-0.15.1``.
+ ``$HOME/zephyr-sdk-0.15.2``.
.. _toolchain_zephyr_sdk_install_macos:
@@ -119,8 +119,8 @@
.. code-block:: bash
cd ~
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_macos-x86_64.tar.gz
- wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/sha256.sum | shasum --check --ignore-missing
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_macos-x86_64.tar.gz
+ wget -O - https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/sha256.sum | shasum --check --ignore-missing
If your host architecture is 64-bit ARM (Apple Silicon, also known as M1), replace
``x86_64`` with ``aarch64`` in order to download the 64-bit ARM macOS SDK.
@@ -129,7 +129,7 @@
.. code-block:: bash
- tar xvf zephyr-sdk-0.15.1_macos-x86_64.tar.gz
+ tar xvf zephyr-sdk-0.15.2_macos-x86_64.tar.gz
.. note::
It is recommended to extract the Zephyr SDK bundle at one of the following
@@ -142,15 +142,15 @@
* ``/opt``
* ``/usr/local``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``$HOME``, the resulting installation path will be
- ``$HOME/zephyr-sdk-0.15.1``.
+ ``$HOME/zephyr-sdk-0.15.2``.
#. Run the Zephyr SDK bundle setup script:
.. code-block:: bash
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
./setup.sh
.. note::
@@ -171,13 +171,13 @@
.. code-block:: console
cd %HOMEPATH%
- wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.1/zephyr-sdk-0.15.1_windows-x86_64.zip
+ wget https://github.com/zephyrproject-rtos/sdk-ng/releases/download/v0.15.2/zephyr-sdk-0.15.2_windows-x86_64.zip
#. Extract the Zephyr SDK bundle archive:
.. code-block:: console
- unzip zephyr-sdk-0.15.1_windows-x86_64.zip
+ unzip zephyr-sdk-0.15.2_windows-x86_64.zip
.. note::
It is recommended to extract the Zephyr SDK bundle at one of the following
@@ -186,15 +186,15 @@
* ``%HOMEPATH%``
* ``%PROGRAMFILES%``
- The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.1`` directory and, when
+ The Zephyr SDK bundle archive contains the ``zephyr-sdk-0.15.2`` directory and, when
extracted under ``%HOMEPATH%``, the resulting installation path will be
- ``%HOMEPATH%\zephyr-sdk-0.15.1``.
+ ``%HOMEPATH%\zephyr-sdk-0.15.2``.
#. Run the Zephyr SDK bundle setup script:
.. code-block:: console
- cd zephyr-sdk-0.15.1
+ cd zephyr-sdk-0.15.2
setup.cmd
.. note::
