drivers/gpio: ite: Modify the format to comply with check_compliance.py
Modify the format to comply with check_compliance.py.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
diff --git a/drivers/gpio/gpio_ite_it8xxx2_v2.c b/drivers/gpio/gpio_ite_it8xxx2_v2.c
index e19345c..79784ad 100644
--- a/drivers/gpio/gpio_ite_it8xxx2_v2.c
+++ b/drivers/gpio/gpio_ite_it8xxx2_v2.c
@@ -529,33 +529,25 @@
return 0;
}
-#define GPIO_ITE_DEV_CFG_DATA(inst) \
-static struct gpio_ite_data gpio_ite_data_##inst; \
-static const struct gpio_ite_cfg gpio_ite_cfg_##inst = { \
- .common = { \
- .port_pin_mask = \
- GPIO_PORT_PIN_MASK_FROM_DT_INST(inst) \
- }, \
- .reg_gpdr = DT_INST_REG_ADDR_BY_IDX(inst, 0), \
- .reg_gpdmr = DT_INST_REG_ADDR_BY_IDX(inst, 1), \
- .reg_gpotr = DT_INST_REG_ADDR_BY_IDX(inst, 2), \
- .reg_p18scr = DT_INST_REG_ADDR_BY_IDX(inst, 3), \
- .reg_gpcr = DT_INST_REG_ADDR_BY_IDX(inst, 4), \
- .wuc_base = DT_INST_PROP_OR(inst, wuc_base, {0}), \
- .wuc_mask = DT_INST_PROP_OR(inst, wuc_mask, {0}), \
- .gpio_irq = IT8XXX2_DT_GPIO_IRQ_LIST(inst), \
- .has_volt_sel = DT_INST_PROP_OR(inst, has_volt_sel, {0}), \
- .num_pins = DT_INST_PROP(inst, ngpios), \
- .kbs_ctrl = DT_INST_PROP_OR(inst, keyboard_controller, 0), \
- }; \
-DEVICE_DT_INST_DEFINE(inst, \
- gpio_ite_init, \
- NULL, \
- &gpio_ite_data_##inst, \
- &gpio_ite_cfg_##inst, \
- PRE_KERNEL_1, \
- CONFIG_GPIO_INIT_PRIORITY, \
- &gpio_ite_driver_api);
+#define GPIO_ITE_DEV_CFG_DATA(inst) \
+ static struct gpio_ite_data gpio_ite_data_##inst; \
+ static const struct gpio_ite_cfg gpio_ite_cfg_##inst = { \
+ .common = {.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(inst)}, \
+ .reg_gpdr = DT_INST_REG_ADDR_BY_IDX(inst, 0), \
+ .reg_gpdmr = DT_INST_REG_ADDR_BY_IDX(inst, 1), \
+ .reg_gpotr = DT_INST_REG_ADDR_BY_IDX(inst, 2), \
+ .reg_p18scr = DT_INST_REG_ADDR_BY_IDX(inst, 3), \
+ .reg_gpcr = DT_INST_REG_ADDR_BY_IDX(inst, 4), \
+ .wuc_base = DT_INST_PROP_OR(inst, wuc_base, {0}), \
+ .wuc_mask = DT_INST_PROP_OR(inst, wuc_mask, {0}), \
+ .gpio_irq = IT8XXX2_DT_GPIO_IRQ_LIST(inst), \
+ .has_volt_sel = DT_INST_PROP_OR(inst, has_volt_sel, {0}), \
+ .num_pins = DT_INST_PROP(inst, ngpios), \
+ .kbs_ctrl = DT_INST_PROP_OR(inst, keyboard_controller, 0), \
+ }; \
+ DEVICE_DT_INST_DEFINE(inst, gpio_ite_init, NULL, &gpio_ite_data_##inst, \
+ &gpio_ite_cfg_##inst, PRE_KERNEL_1, CONFIG_GPIO_INIT_PRIORITY, \
+ &gpio_ite_driver_api);
DT_INST_FOREACH_STATUS_OKAY(GPIO_ITE_DEV_CFG_DATA)
