boards: stm32u5: Fix instructions to use openocd
Instructions to use openocd on stm32u5 based platforms were missing
an instruction on the branch to use.
Also, the console excerpt were not rendering correctly, so fix
them.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
diff --git a/boards/arm/b_u585i_iot02a/doc/index.rst b/boards/arm/b_u585i_iot02a/doc/index.rst
index 24bccc3..02da73c 100644
--- a/boards/arm/b_u585i_iot02a/doc/index.rst
+++ b/boards/arm/b_u585i_iot02a/doc/index.rst
@@ -255,9 +255,9 @@
STM32U5 support is not currently supported in openocd. As a temporary workaround,
user can use `STMicroelectronics customized version of OpenOCD`_ to debug the
the B_U585I_IOT02A Discovery kit.
-For this you need to fetch this repo and build openocd following the instructions
-provided in the README of the project. Then, build zephyr project indicating the
-openocd location in west build command.
+For this you need to fetch this repo, checkout branch "openocd-cubeide-r3" and
+build openocd following the instructions provided in the README of the project.
+Then, build zephyr project indicating the openocd location in west build command.
Here is an example for the :ref:`blinky-sample` application.
@@ -269,17 +269,11 @@
Then, indicate openocd as the chosen runner in flash and debug commands:
-.. zephyr-app-commands::
- :zephyr-app: samples/basic/blinky
- :board: b_u585i_iot02a
- :gen-args: -r openocd
- :goals: flash
-.. zephyr-app-commands::
- :zephyr-app: samples/basic/blinky
- :board: nucleo_u575zi_q
- :gen-args: -r openocd
- :goals: debug
+ .. code-block:: console
+
+ $ west flash -r openocd
+ $ west debug -r openocd
.. _B U585I IOT02A Discovery kit website:
diff --git a/boards/arm/nucleo_u575zi_q/doc/nucleou575zi_q.rst b/boards/arm/nucleo_u575zi_q/doc/nucleou575zi_q.rst
index 681f590..1141a2a 100644
--- a/boards/arm/nucleo_u575zi_q/doc/nucleou575zi_q.rst
+++ b/boards/arm/nucleo_u575zi_q/doc/nucleou575zi_q.rst
@@ -240,9 +240,9 @@
STM32U5 support is not currently supported in openocd. As a temporary workaround,
user can use `STMicroelectronics customized version of OpenOCD`_ to debug the
the Nucleo U575ZI Q.
-For this you need to fetch this repo and build openocd following the instructions
-provided in the README of the project. Then, build zephyr project indicating the
-openocd location in west build command.
+For this you need to fetch this repo, checkout branch "openocd-cubeide-r3" and
+build openocd following the instructions provided in the README of the project.
+Then, build zephyr project indicating the openocd location in west build command.
Here is an example for the :ref:`blinky-sample` application.
@@ -254,17 +254,11 @@
Then, indicate openocd as the chosen runner in flash and debug commands:
-.. zephyr-app-commands::
- :zephyr-app: samples/basic/blinky
- :board: nucleo_u575zi_q
- :gen-args: -r openocd
- :goals: flash
-.. zephyr-app-commands::
- :zephyr-app: samples/basic/blinky
- :board: nucleo_u575zi_q
- :gen-args: -r openocd
- :goals: debug
+ .. code-block:: console
+
+ $ west flash -r openocd
+ $ west debug -r openocd
.. _STM32 Nucleo-144 board User Manual:
