blob: b36a766da8b55a7f6bd67908a5621a819e45f198 [file] [log] [blame]
# Copyright 2021 The Pigweed Authors
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
import("//build_overrides/pigweed.gni")
import("$dir_pw_rpc/system_server/backend.gni")
import("$dir_pw_sys_io/backend.gni")
import("$dir_pw_third_party/stm32cube/stm32cube.gni")
import("$dir_pw_toolchain/arm_gcc/toolchains.gni")
_target_config = {
# Use the logging main.
pw_unit_test_MAIN = "$dir_pw_unit_test:logging_main"
# Configuration options for Pigweed executable targets.
pw_build_EXECUTABLE_TARGET_TYPE = "stm32h753zi_executable"
pw_build_EXECUTABLE_TARGET_TYPE_FILE =
get_path_info("stm32h753zi_executable.gni", "abspath")
# Path to the bloaty config file for the output binaries.
# pw_bloat_BLOATY_CONFIG = "$dir_pw_boot_armv7m/bloaty_config.bloaty"
#TODO: Fix test server: likely have to fork stm32cube-disc1 implementation
# if (pw_use_test_server) {
# _test_runner_script = "py/stm32cube_disc1_utils/unit_test_client.py"
# pw_unit_test_AUTOMATIC_RUNNER =
# get_path_info(_test_runner_script, "abspath")
# }
# Facade backends
pw_assert_BACKEND = dir_pw_assert_basic
# pw_boot_BACKEND = dir_pw_boot_armv7m
pw_build_LINK_DEPS = [
"$dir_pw_assert:impl",
"$dir_pw_log:impl",
]
### pw_cpu_exception not yet used
# pw_cpu_exception_ENTRY_BACKEND =
# "$dir_pw_cpu_exception_cortex_m:cpu_exception_armv7m"
# pw_cpu_exception_HANDLER_BACKEND = "$dir_pw_cpu_exception:basic_handler"
# pw_cpu_exception_SUPPORT_BACKEND =
# "$dir_pw_cpu_exception_cortex_m:support_armv7m"
pw_sync_INTERRUPT_SPIN_LOCK_BACKEND =
"$dir_pw_sync_baremetal:interrupt_spin_lock"
pw_log_BACKEND = dir_pw_log_basic
pw_sys_io_BACKEND = dir_pw_sys_io_stm32cube
pw_sys_io_stm32cube_usart_num = "3"
pw_sys_io_stm32cube_gpio_port = "D"
pw_sys_io_stm32cube_gpio_tx_pin = "8"
pw_sys_io_stm32cube_gpio_rx_pin = "9"
#TODO: remove dependency on stm32f429i-disc1 rpc server.
pw_rpc_system_server_BACKEND =
"$dir_pigweed/targets/stm32f429i-disc1:system_rpc_server"
# pw_malloc_BACKEND = dir_pw_malloc_freelist
current_cpu = "arm"
current_os = ""
pw_board_led_BACKEND = dir_pw_board_led_stm32cube
pw_board_led_stm32cube_gpio_port = "B"
pw_board_led_stm32cube_gpio_pin = "0"
pw_spin_delay_BACKEND = dir_pw_spin_delay_stm32cube
dir_pw_third_party_stm32cube = dir_pw_third_party_stm32cube_h7
pw_third_party_stm32cube_PRODUCT = "stm32h753zi"
}
_toolchain_properties = {
final_binary_extension = ".elf"
}
_target_default_configs = [
"$dir_pw_build:extra_strict_warnings",
"$dir_pw_toolchain/arm_gcc:enable_float_printf",
]
pw_target_toolchain_stm32h753zi_nucleo = {
_excluded_members = [
"defaults",
"name",
]
debug = {
name = "stm32h753zi_nucleo_debug"
_toolchain_base = pw_toolchain_arm_gcc.cortex_m7_debug
forward_variables_from(_toolchain_base, "*", _excluded_members)
forward_variables_from(_toolchain_properties, "*")
defaults = {
forward_variables_from(_toolchain_base.defaults, "*")
forward_variables_from(_target_config, "*")
default_configs += _target_default_configs
}
}
speed_optimized = {
name = "stm32h753zi_nucleo_speed_optimized"
_toolchain_base = pw_toolchain_arm_gcc.cortex_m7_speed_optimized
forward_variables_from(_toolchain_base, "*", _excluded_members)
forward_variables_from(_toolchain_properties, "*")
defaults = {
forward_variables_from(_toolchain_base.defaults, "*")
forward_variables_from(_target_config, "*")
default_configs += _target_default_configs
}
}
size_optimized = {
name = "stm32h753zi_nucleo_size_optimized"
_toolchain_base = pw_toolchain_arm_gcc.cortex_m7_size_optimized
forward_variables_from(_toolchain_base, "*", _excluded_members)
forward_variables_from(_toolchain_properties, "*")
defaults = {
forward_variables_from(_toolchain_base.defaults, "*")
forward_variables_from(_target_config, "*")
default_configs += _target_default_configs
}
}
}
# This list just contains the members of the above scope for convenience to make
# it trivial to generate all the toolchains in this file via a
# `generate_toolchains` target.
pw_target_toolchain_stm32h753zi_nucleo_list = [
pw_target_toolchain_stm32h753zi_nucleo.debug,
pw_target_toolchain_stm32h753zi_nucleo.speed_optimized,
pw_target_toolchain_stm32h753zi_nucleo.size_optimized,
]