blob: cc76d42a7748ed5f5efa28cbba9cf129664a03f4 [file] [log] [blame]
# Copyright 2023 The Pigweed Authors
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may not
# use this file except in compliance with the License. You may obtain a copy of
# the License at
#
# https://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations under
# the License.
import("//build_overrides/pigweed.gni")
import("$dir_pw_rpc/system_server/backend.gni")
import("$dir_pw_sys_io/backend.gni")
import("$dir_pw_third_party/stm32cube/stm32cube.gni")
import("$dir_pw_toolchain/arm_gcc/toolchains.gni")
_target_config = {
# Use the logging main.
pw_unit_test_MAIN = "$dir_pw_unit_test:logging_main"
# Configuration options for Pigweed executable targets.
pw_build_EXECUTABLE_TARGET_TYPE = "stm32f769i_executable"
pw_build_EXECUTABLE_TARGET_TYPE_FILE =
get_path_info("stm32f769i_executable.gni", "abspath")
# Path to the bloaty config file for the output binaries.
pw_bloat_BLOATY_CONFIG = "$dir_pw_boot_cortex_m/bloaty_config.bloaty"
#TODO: Fix test server: likely have to fork stm32f769i-disc0 implementation
# if (pw_use_test_server) {
# _test_runner_script = "py/stm32f769i_disc0_utils/unit_test_client.py"
# pw_unit_test_AUTOMATIC_RUNNER =
# get_path_info(_test_runner_script, "abspath")
# }
# Facade backends
pw_assert_BACKEND = dir_pw_assert_basic
pw_boot_BACKEND = "$dir_pw_boot_cortex_m:armv7m"
# TODO(cmumford): Review backend - adding to allow compile.
pw_sync_MUTEX_BACKEND = "$dir_pw_sync_baremetal:mutex"
### pw_cpu_exception not yet used
# pw_cpu_exception_ENTRY_BACKEND =
# "$dir_pw_cpu_exception_cortex_m:cpu_exception_armv7m"
# pw_cpu_exception_HANDLER_BACKEND = "$dir_pw_cpu_exception:basic_handler"
# pw_cpu_exception_SUPPORT_BACKEND =
# "$dir_pw_cpu_exception_cortex_m:support_armv7m"
pw_sync_INTERRUPT_SPIN_LOCK_BACKEND =
"$dir_pw_sync_baremetal:interrupt_spin_lock"
pw_log_BACKEND = dir_pw_log_basic
pw_sys_io_BACKEND = dir_pw_sys_io_stm32cube
pw_sys_io_stm32cube_CONFIG = "$dir_pigweed_experimental/targets/stm32f769i_disc0_stm32cube:module_config_overrides"
pw_third_party_freertos_CONFIG = "$dir_pigweed_experimental/targets/stm32f769i_disc0_stm32cube:stm32f7xx_freertos_config"
pw_third_party_freertos_PORT =
"$dir_pigweed_experimental/third_party/freertos:arm_cm7_freertos_port"
#TODO: remove dependency on stm32f769i-disc0 rpc server.
pw_rpc_system_server_BACKEND =
"$dir_pigweed/targets/stm32f769i_disc0:system_rpc_server"
pw_malloc_BACKEND = dir_pw_malloc_freelist
pw_boot_cortex_m_LINK_CONFIG_DEFINES = [
"PW_BOOT_FLASH_BEGIN=0x08000400",
"PW_BOOT_FLASH_SIZE=2048K",
# TODO(b/235348465): Currently "pw_tokenizer/detokenize_test" requires at
# least 6K bytes in heap when using pw_malloc_freelist. The heap size
# required for tests should be investigated.
"PW_BOOT_HEAP_SIZE=7K",
"PW_BOOT_MIN_STACK_SIZE=8K",
"PW_BOOT_RAM_BEGIN=0x20000000",
"PW_BOOT_RAM_SIZE=512K",
"PW_BOOT_VECTOR_TABLE_BEGIN=0x08000000",
"PW_BOOT_VECTOR_TABLE_SIZE=0x400",
]
pw_build_LINK_DEPS = [
"$dir_pw_assert:impl",
"$dir_pw_log:impl",
]
current_cpu = "arm"
current_os = ""
pw_board_led_BACKEND = dir_pw_board_led_stm32cube
pw_board_led_stm32cube_gpio_port = "J"
pw_board_led_stm32cube_gpio_pin = "13"
app_common_BACKEND =
"$dir_pigweed_experimental/applications/app_common_impl:stm32cube"
pw_app_common_DISPLAY_WIDTH = "320"
pw_app_common_DISPLAY_HEIGHT = "240"
pw_app_common_STM32_DISPLAY_CS_PORT = "C"
pw_app_common_DISPLAY_CS_GPIO = "2"
pw_app_common_STM32_DISPLAY_DC_PORT = "D"
pw_app_common_DISPLAY_DC_GPIO = "13"
pw_app_common_DISPLAY_RESET_GPIO = "-1"
pw_spin_delay_BACKEND = dir_pw_spin_delay_stm32cube
# Configure backend for pw_touchscreen
pw_touchscreen_BACKEND = "$dir_pw_touchscreen_null"
dir_pw_third_party_stm32cube = dir_pw_third_party_stm32cube_f7
pw_third_party_stm32cube_PRODUCT = "STM32F769xx"
pw_third_party_stm32cube_CONFIG = "$dir_pigweed_experimental/targets/stm32f769i_disc0_stm32cube:stm32f7xx_hal_config"
pw_third_party_stm32cube_CORE_INIT = ""
}
_toolchain_properties = {
final_binary_extension = ".elf"
}
_target_default_configs = [
"$dir_pw_build:extra_strict_warnings",
"$dir_pw_toolchain/arm_gcc:enable_float_printf",
]
pw_target_toolchain_stm32f769i_disc0 = {
_excluded_members = [
"defaults",
"name",
]
debug = {
name = "stm32f769i_disc0_stm32cube_debug"
_toolchain_base = pw_toolchain_arm_gcc.cortex_m7f_debug
forward_variables_from(_toolchain_base, "*", _excluded_members)
forward_variables_from(_toolchain_properties, "*")
defaults = {
forward_variables_from(_toolchain_base.defaults, "*")
forward_variables_from(_target_config, "*")
default_configs += _target_default_configs
}
}
speed_optimized = {
name = "stm32f769i_disc0_stm32cube_speed_optimized"
_toolchain_base = pw_toolchain_arm_gcc.cortex_m7f_speed_optimized
forward_variables_from(_toolchain_base, "*", _excluded_members)
forward_variables_from(_toolchain_properties, "*")
defaults = {
forward_variables_from(_toolchain_base.defaults, "*")
forward_variables_from(_target_config, "*")
default_configs += _target_default_configs
}
}
size_optimized = {
name = "stm32f769i_disc0_stm32cube_size_optimized"
_toolchain_base = pw_toolchain_arm_gcc.cortex_m7f_size_optimized
forward_variables_from(_toolchain_base, "*", _excluded_members)
forward_variables_from(_toolchain_properties, "*")
defaults = {
forward_variables_from(_toolchain_base.defaults, "*")
forward_variables_from(_target_config, "*")
default_configs += _target_default_configs
}
}
}
# This list just contains the members of the above scope for convenience to make
# it trivial to generate all the toolchains in this file via a
# `generate_toolchains` target.
pw_target_toolchain_stm32f769i_disc0_list = [
pw_target_toolchain_stm32f769i_disc0.debug,
pw_target_toolchain_stm32f769i_disc0.speed_optimized,
pw_target_toolchain_stm32f769i_disc0.size_optimized,
]