pw_status/docs.rst

.. _module-pw_status:

---------
pw_status
---------
``pw_status`` provides features for communicating the result of an operation.
The classes in ``pw_status`` are used extensively throughout Pigweed.

pw::Status
==========
The primary feature of ``pw_status`` is the ``pw::Status`` class.
``pw::Status`` (``pw_status/status.h``) is a simple, zero-overhead status
object that wraps a status code.

``pw::Status`` uses Google's standard status codes (see the `Google APIs
repository <https://github.com/googleapis/googleapis/blob/HEAD/google/rpc/code.proto>`_).
These codes are used extensively in Google projects including `Abseil
<https://abseil.io>`_ (`status/status.h
<https://cs.opensource.google/abseil/abseil-cpp/+/HEAD:absl/status/status.h>`_
) and `gRPC <https://grpc.io>`_ (`doc/statuscodes.md
<https://github.com/grpc/grpc/blob/HEAD/doc/statuscodes.md>`_).

An OK ``Status`` is created by the ``pw::OkStatus`` function or by the default
``Status`` constructor.  Non-OK ``Status`` is created with a static member
function that corresponds with the status code.

.. code-block:: cpp

  // Ok (gRPC code "OK") does not indicate an error; this value is returned on
  // success. It is typical to check for this value before proceeding on any
  // given call across an API or RPC boundary. To check this value, use the
  // `status.ok()` member function rather than inspecting the raw code.
  //
  // OkStatus() is provided as a free function, rather than a static member
  // function like the error statuses to avoid conflicts with the ok() member
  // function. Status::Ok() would be too similar to Status::ok().
  pw::OkStatus()

  // Cancelled (gRPC code "CANCELLED") indicates the operation was cancelled,
  // typically by the caller.
  pw::Status::Cancelled()

  // Unknown (gRPC code "UNKNOWN") indicates an unknown error occurred. In
  // general, more specific errors should be raised, if possible. Errors raised
  // by APIs that do not return enough error information may be converted to
  // this error.
  pw::Status::Unknown()

  // InvalidArgument (gRPC code "INVALID_ARGUMENT") indicates the caller
  // specified an invalid argument, such a malformed filename. Note that such
  // errors should be narrowly limited to indicate to the invalid nature of the
  // arguments themselves. Errors with validly formed arguments that may cause
  // errors with the state of the receiving system should be denoted with
  // `FailedPrecondition` instead.
  pw::Status::InvalidArgument()

  // DeadlineExceeded (gRPC code "DEADLINE_EXCEEDED") indicates a deadline
  // expired before the operation could complete. For operations that may change
  // state within a system, this error may be returned even if the operation has
  // completed successfully. For example, a successful response from a server
  // could have been delayed long enough for the deadline to expire.
  pw::Status::DeadlineExceeded()

  // NotFound (gRPC code "NOT_FOUND") indicates some requested entity (such as
  // a file or directory) was not found.
  //
  // `NotFound` is useful if a request should be denied for an entire class of
  // users, such as during a gradual feature rollout or undocumented allow list.
  // If, instead, a request should be denied for specific sets of users, such as
  // through user-based access control, use `PermissionDenied` instead.
  pw::Status::NotFound()

  // AlreadyExists (gRPC code "ALREADY_EXISTS") indicates the entity that a
  // caller attempted to create (such as file or directory) is already present.
  pw::Status::AlreadyExists()

  // PermissionDenied (gRPC code "PERMISSION_DENIED") indicates that the caller
  // does not have permission to execute the specified operation. Note that this
  // error is different than an error due to an *un*authenticated user. This
  // error code does not imply the request is valid or the requested entity
  // exists or satisfies any other pre-conditions.
  //
  // `PermissionDenied` must not be used for rejections caused by exhausting
  // some resource. Instead, use `ResourceExhausted` for those errors.
  // `PermissionDenied` must not be used if the caller cannot be identified.
  // Instead, use `Unauthenticated` for those errors.
  pw::Status::PermissionDenied()

  // ResourceExhausted (gRPC code "RESOURCE_EXHAUSTED") indicates some resource
  // has been exhausted, perhaps a per-user quota, or perhaps the entire file
  // system is out of space.
  pw::Status::ResourceExhausted()

  // FailedPrecondition (gRPC code "FAILED_PRECONDITION") indicates that the
  // operation was rejected because the system is not in a state required for
  // the operation's execution. For example, a directory to be deleted may be
  // non-empty, an "rmdir" operation is applied to a non-directory, etc.
  //
  // Some guidelines that may help a service implementer in deciding between
  // `FailedPrecondition`, `Aborted`, and `Unavailable`:
  //
  //  (a) Use `Unavailable` if the client can retry just the failing call.
  //  (b) Use `Aborted` if the client should retry at a higher transaction
  //      level (such as when a client-specified test-and-set fails, indicating
  //      the client should restart a read-modify-write sequence).
  //  (c) Use `FailedPrecondition` if the client should not retry until
  //      the system state has been explicitly fixed. For example, if an "rmdir"
  //      fails because the directory is non-empty, `FailedPrecondition`
  //      should be returned since the client should not retry unless
  //      the files are deleted from the directory.
  pw::Status::FailedPrecondition()

  // Aborted (gRPC code "ABORTED") indicates the operation was aborted,
  // typically due to a concurrency issue such as a sequencer check failure or a
  // failed transaction.
  //
  // See the guidelines above for deciding between `FailedPrecondition`,
  // `Aborted`, and `Unavailable`.
  pw::Status::Aborted()

  // OutOfRange (gRPC code "OUT_OF_RANGE") indicates the operation was
  // attempted past the valid range, such as seeking or reading past an
  // end-of-file.
  //
  // Unlike `InvalidArgument`, this error indicates a problem that may
  // be fixed if the system state changes. For example, a 32-bit file
  // system will generate `InvalidArgument` if asked to read at an
  // offset that is not in the range [0,2^32-1], but it will generate
  // `OutOfRange` if asked to read from an offset past the current
  // file size.
  //
  // There is a fair bit of overlap between `FailedPrecondition` and
  // `OutOfRange`.  We recommend using `OutOfRange` (the more specific
  // error) when it applies so that callers who are iterating through
  // a space can easily look for an `OutOfRange` error to detect when
  // they are done.
  pw::Status::OutOfRange()

  // Unimplemented (gRPC code "UNIMPLEMENTED") indicates the operation is not
  // implemented or supported in this service. In this case, the operation
  // should not be re-attempted.
  pw::Status::Unimplemented()

  // Internal (gRPC code "INTERNAL") indicates an internal error has occurred
  // and some invariants expected by the underlying system have not been
  // satisfied. This error code is reserved for serious errors.
  pw::Status::Internal()

  // Unavailable (gRPC code "UNAVAILABLE") indicates the service is currently
  // unavailable and that this is most likely a transient condition. An error
  // such as this can be corrected by retrying with a backoff scheme. Note that
  // it is not always safe to retry non-idempotent operations.
  //
  // See the guidelines above for deciding between `FailedPrecondition`,
  // `Aborted`, and `Unavailable`.
  pw::Status::Unavailable()

  // DataLoss (gRPC code "DATA_LOSS") indicates that unrecoverable data loss or
  // corruption has occurred. As this error is serious, proper alerting should
  // be attached to errors such as this.
  pw::Status::DataLoss()

  // Unauthenticated (gRPC code "UNAUTHENTICATED") indicates that the request
  // does not have valid authentication credentials for the operation. Correct
  // the authentication and try again.
  pw::Status::Unauthenticated()

.. note::
  Status enumerations are also supported for Python and Typescript.

Tracking the first error encountered
------------------------------------
In some contexts it is useful to track the first error encountered while
allowing execution to continue. Manually writing out ``if`` statements to check
and then assign quickly becomes verbose, and doesn't explicitly highlight the
intended behavior of "latching" to the first error.

  .. code-block:: cpp

    Status overall_status;
    for (Sector& sector : sectors) {
      Status erase_status = sector.Erase();
      if (!overall_status.ok()) {
        overall_status = erase_status;
      }

      if (erase_status.ok()) {
        Status header_write_status = sector.WriteHeader();
        if (!overall_status.ok()) {
          overall_status = header_write_status;
        }
      }
    }
    return overall_status;

``pw::Status`` has an ``Update()`` helper function that does exactly this to
reduce visual clutter and succinctly highlight the intended behavior.

  .. code-block:: cpp

    Status overall_status;
    for (Sector& sector : sectors) {
      Status erase_status = sector.Erase();
      overall_status.Update(erase_status);

      if (erase_status.ok()) {
        overall_status.Update(sector.WriteHeader());
      }
    }
    return overall_status;

Unused result warnings
----------------------
If the ``PW_STATUS_CFG_CHECK_IF_USED`` option is enabled, ``pw::Status`` objects
returned from function calls must be used or it is a compilation error. To
silence these warnings call ``IgnoreError()`` on the returned status object.

``PW_STATUS_CFG_CHECK_IF_USED`` defaults to off. Pigweed compiles with this
option enabled, but projects that use Pigweed will need to be updated to compile
with this option. After all projects have migrated, unused result warnings will
be enabled unconditionally.

C compatibility
---------------
``pw_status`` provides the C-compatible ``pw_Status`` enum for the status codes.
For ease of use, ``pw::Status`` implicitly converts to and from ``pw_Status``.
However, the ``pw_Status`` enum should never be used in C++; instead use the
``Status`` class.

The values of the ``pw_Status`` enum are all-caps and prefixed with
``PW_STATUS_``. For example, ``PW_STATUS_DATA_LOSS`` corresponds with the C++
``Status::DataLoss()``.

StatusWithSize
==============
``pw::StatusWithSize`` (``pw_status/status_with_size.h``) is a convenient,
efficient class for reporting a status along with an unsigned integer value.
It is similar to the ``pw::Result<T>`` class, but it stores both a size and a
status, regardless of the status value, and only supports a limited range (27
bits).

``pw::StatusWithSize`` values may be created with functions similar to
``pw::Status``. For example,

  .. code-block:: cpp

    // An OK StatusWithSize with a size of 123.
    StatusWithSize(123)

    // A NOT_FOUND StatusWithSize with a size of 0.
    StatusWithSize::NotFound()

    // A RESOURCE_EXHAUSTED StatusWithSize with a size of 10.
    StatusWithSize::ResourceExhausted(10)

PW_TRY
======
``PW_TRY`` (``pw_status/try.h``) is a convenient set of macros for working
with Status and StatusWithSize objects in functions that return Status or
StatusWithSize. The PW_TRY and PW_TRY_WITH_SIZE macros call a function and
do an early return if the function's return status is not ok.

Example:

.. code-block:: cpp

  Status PwTryExample() {
    PW_TRY(FunctionThatReturnsStatus());
    PW_TRY(FunctionThatReturnsStatusWithSize());

    // Do something, only executed if both functions above return OK.
  }

  StatusWithSize PwTryWithSizeExample() {
    PW_TRY_WITH_SIZE(FunctionThatReturnsStatus());
    PW_TRY_WITH_SIZE(FunctionThatReturnsStatusWithSize());

    // Do something, only executed if both functions above return OK.
  }

PW_TRY_ASSIGN is for working with StatusWithSize objects in in functions
that return Status. It is similar to PW_TRY with the addition of assigning
the size from the StatusWithSize on ok.

.. code-block:: cpp

  Status PwTryAssignExample() {
    size_t size_value
    PW_TRY_ASSIGN(size_value, FunctionThatReturnsStatusWithSize());

    // Do something that uses size_value. size_value is only assigned and this
    // following code executed if the PW_TRY_ASSIGN function above returns OK.
  }

Compatibility
=============
C++14

Zephyr
======
To enable ``pw_status`` for Zephyr add ``CONFIG_PIGWEED_STATUS=y`` to the
project's configuration.