blob: e629b30ff6878332d908f1ef29bafb9b1dea9df9 [file] [log] [blame]
#!/usr/bin/env python3
#
# Copyright (C) 2008 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""The repo tool.
People shouldn't run this directly; instead, they should use the `repo` wrapper
which takes care of execing this entry point.
"""
import getpass
import netrc
import optparse
import os
import shlex
import sys
import textwrap
import time
import urllib.request
try:
import kerberos
except ImportError:
kerberos = None
from color import SetDefaultColoring
import event_log
from repo_trace import SetTrace, Trace, SetTraceToStderr
from git_command import user_agent
from git_config import RepoConfig
from git_trace2_event_log import EventLog
from command import InteractiveCommand
from command import MirrorSafeCommand
from command import GitcAvailableCommand, GitcClientCommand
from subcmds.version import Version
from editor import Editor
from error import DownloadError
from error import InvalidProjectGroupsError
from error import ManifestInvalidRevisionError
from error import ManifestParseError
from error import NoManifestException
from error import NoSuchProjectError
from error import RepoChangedException
import gitc_utils
from manifest_xml import GitcClient, RepoClient
from pager import RunPager, TerminatePager
from wrapper import WrapperPath, Wrapper
from subcmds import all_commands
# NB: These do not need to be kept in sync with the repo launcher script.
# These may be much newer as it allows the repo launcher to roll between
# different repo releases while source versions might require a newer python.
#
# The soft version is when we start warning users that the version is old and
# we'll be dropping support for it. We'll refuse to work with versions older
# than the hard version.
#
# python-3.6 is in Ubuntu Bionic.
MIN_PYTHON_VERSION_SOFT = (3, 6)
MIN_PYTHON_VERSION_HARD = (3, 6)
if sys.version_info.major < 3:
print('repo: error: Python 2 is no longer supported; '
'Please upgrade to Python {}.{}+.'.format(*MIN_PYTHON_VERSION_SOFT),
file=sys.stderr)
sys.exit(1)
else:
if sys.version_info < MIN_PYTHON_VERSION_HARD:
print('repo: error: Python 3 version is too old; '
'Please upgrade to Python {}.{}+.'.format(*MIN_PYTHON_VERSION_SOFT),
file=sys.stderr)
sys.exit(1)
elif sys.version_info < MIN_PYTHON_VERSION_SOFT:
print('repo: warning: your Python 3 version is no longer supported; '
'Please upgrade to Python {}.{}+.'.format(*MIN_PYTHON_VERSION_SOFT),
file=sys.stderr)
global_options = optparse.OptionParser(
usage='repo [-p|--paginate|--no-pager] COMMAND [ARGS]',
add_help_option=False)
global_options.add_option('-h', '--help', action='store_true',
help='show this help message and exit')
global_options.add_option('--help-all', action='store_true',
help='show this help message with all subcommands and exit')
global_options.add_option('-p', '--paginate',
dest='pager', action='store_true',
help='display command output in the pager')
global_options.add_option('--no-pager',
dest='pager', action='store_false',
help='disable the pager')
global_options.add_option('--color',
choices=('auto', 'always', 'never'), default=None,
help='control color usage: auto, always, never')
global_options.add_option('--trace',
dest='trace', action='store_true',
help='trace git command execution (REPO_TRACE=1)')
global_options.add_option('--trace_to_stderr',
dest='trace_to_stderr', action='store_true',
help='trace outputs go to stderr in addition to .repo/TRACE_FILE')
global_options.add_option('--trace-python',
dest='trace_python', action='store_true',
help='trace python command execution')
global_options.add_option('--time',
dest='time', action='store_true',
help='time repo command execution')
global_options.add_option('--version',
dest='show_version', action='store_true',
help='display this version of repo')
global_options.add_option('--show-toplevel',
action='store_true',
help='display the path of the top-level directory of '
'the repo client checkout')
global_options.add_option('--event-log',
dest='event_log', action='store',
help='filename of event log to append timeline to')
global_options.add_option('--git-trace2-event-log', action='store',
help='directory to write git trace2 event log to')
global_options.add_option('--submanifest-path', action='store',
metavar='REL_PATH', help='submanifest path')
class _Repo(object):
def __init__(self, repodir):
self.repodir = repodir
self.commands = all_commands
def _PrintHelp(self, short: bool = False, all_commands: bool = False):
"""Show --help screen."""
global_options.print_help()
print()
if short:
commands = ' '.join(sorted(self.commands))
wrapped_commands = textwrap.wrap(commands, width=77)
print('Available commands:\n %s' % ('\n '.join(wrapped_commands),))
print('\nRun `repo help <command>` for command-specific details.')
print('Bug reports:', Wrapper().BUG_URL)
else:
cmd = self.commands['help']()
if all_commands:
cmd.PrintAllCommandsBody()
else:
cmd.PrintCommonCommandsBody()
def _ParseArgs(self, argv):
"""Parse the main `repo` command line options."""
for i, arg in enumerate(argv):
if not arg.startswith('-'):
name = arg
glob = argv[:i]
argv = argv[i + 1:]
break
else:
name = None
glob = argv
argv = []
gopts, _gargs = global_options.parse_args(glob)
if name:
name, alias_args = self._ExpandAlias(name)
argv = alias_args + argv
return (name, gopts, argv)
def _ExpandAlias(self, name):
"""Look up user registered aliases."""
# We don't resolve aliases for existing subcommands. This matches git.
if name in self.commands:
return name, []
key = 'alias.%s' % (name,)
alias = RepoConfig.ForRepository(self.repodir).GetString(key)
if alias is None:
alias = RepoConfig.ForUser().GetString(key)
if alias is None:
return name, []
args = alias.strip().split(' ', 1)
name = args[0]
if len(args) == 2:
args = shlex.split(args[1])
else:
args = []
return name, args
def _Run(self, name, gopts, argv):
"""Execute the requested subcommand."""
result = 0
# Handle options that terminate quickly first.
if gopts.help or gopts.help_all:
self._PrintHelp(short=False, all_commands=gopts.help_all)
return 0
elif gopts.show_version:
# Always allow global --version regardless of subcommand validity.
name = 'version'
elif gopts.show_toplevel:
print(os.path.dirname(self.repodir))
return 0
elif not name:
# No subcommand specified, so show the help/subcommand.
self._PrintHelp(short=True)
return 1
SetDefaultColoring(gopts.color)
git_trace2_event_log = EventLog()
outer_client = RepoClient(self.repodir)
repo_client = outer_client
if gopts.submanifest_path:
repo_client = RepoClient(self.repodir,
submanifest_path=gopts.submanifest_path,
outer_client=outer_client)
gitc_manifest = None
gitc_client_name = gitc_utils.parse_clientdir(os.getcwd())
if gitc_client_name:
gitc_manifest = GitcClient(self.repodir, gitc_client_name)
repo_client.isGitcClient = True
try:
cmd = self.commands[name](
repodir=self.repodir,
client=repo_client,
manifest=repo_client.manifest,
outer_client=outer_client,
outer_manifest=outer_client.manifest,
gitc_manifest=gitc_manifest,
git_event_log=git_trace2_event_log)
except KeyError:
print("repo: '%s' is not a repo command. See 'repo help'." % name,
file=sys.stderr)
return 1
Editor.globalConfig = cmd.client.globalConfig
if not isinstance(cmd, MirrorSafeCommand) and cmd.manifest.IsMirror:
print("fatal: '%s' requires a working directory" % name,
file=sys.stderr)
return 1
if isinstance(cmd, GitcAvailableCommand) and not gitc_utils.get_gitc_manifest_dir():
print("fatal: '%s' requires GITC to be available" % name,
file=sys.stderr)
return 1
if isinstance(cmd, GitcClientCommand) and not gitc_client_name:
print("fatal: '%s' requires a GITC client" % name,
file=sys.stderr)
return 1
try:
copts, cargs = cmd.OptionParser.parse_args(argv)
copts = cmd.ReadEnvironmentOptions(copts)
except NoManifestException as e:
print('error: in `%s`: %s' % (' '.join([name] + argv), str(e)),
file=sys.stderr)
print('error: manifest missing or unreadable -- please run init',
file=sys.stderr)
return 1
if gopts.pager is not False and not isinstance(cmd, InteractiveCommand):
config = cmd.client.globalConfig
if gopts.pager:
use_pager = True
else:
use_pager = config.GetBoolean('pager.%s' % name)
if use_pager is None:
use_pager = cmd.WantPager(copts)
if use_pager:
RunPager(config)
start = time.time()
cmd_event = cmd.event_log.Add(name, event_log.TASK_COMMAND, start)
cmd.event_log.SetParent(cmd_event)
git_trace2_event_log.StartEvent()
git_trace2_event_log.CommandEvent(name='repo', subcommands=[name])
try:
cmd.CommonValidateOptions(copts, cargs)
cmd.ValidateOptions(copts, cargs)
this_manifest_only = copts.this_manifest_only
outer_manifest = copts.outer_manifest
if cmd.MULTI_MANIFEST_SUPPORT or this_manifest_only:
result = cmd.Execute(copts, cargs)
elif outer_manifest and repo_client.manifest.is_submanifest:
# The command does not support multi-manifest, we are using a
# submanifest, and the command line is for the outermost manifest.
# Re-run using the outermost manifest, which will recurse through the
# submanifests.
gopts.submanifest_path = ''
result = self._Run(name, gopts, argv)
else:
# No multi-manifest support. Run the command in the current
# (sub)manifest, and then any child submanifests.
result = cmd.Execute(copts, cargs)
for submanifest in repo_client.manifest.submanifests.values():
spec = submanifest.ToSubmanifestSpec()
gopts.submanifest_path = submanifest.repo_client.path_prefix
child_argv = argv[:]
child_argv.append('--no-outer-manifest')
# Not all subcommands support the 3 manifest options, so only add them
# if the original command includes them.
if hasattr(copts, 'manifest_url'):
child_argv.extend(['--manifest-url', spec.manifestUrl])
if hasattr(copts, 'manifest_name'):
child_argv.extend(['--manifest-name', spec.manifestName])
if hasattr(copts, 'manifest_branch'):
child_argv.extend(['--manifest-branch', spec.revision])
result = self._Run(name, gopts, child_argv) or result
except (DownloadError, ManifestInvalidRevisionError,
NoManifestException) as e:
print('error: in `%s`: %s' % (' '.join([name] + argv), str(e)),
file=sys.stderr)
if isinstance(e, NoManifestException):
print('error: manifest missing or unreadable -- please run init',
file=sys.stderr)
result = 1
except NoSuchProjectError as e:
if e.name:
print('error: project %s not found' % e.name, file=sys.stderr)
else:
print('error: no project in current directory', file=sys.stderr)
result = 1
except InvalidProjectGroupsError as e:
if e.name:
print('error: project group must be enabled for project %s' % e.name, file=sys.stderr)
else:
print('error: project group must be enabled for the project in the current directory',
file=sys.stderr)
result = 1
except SystemExit as e:
if e.code:
result = e.code
raise
finally:
finish = time.time()
elapsed = finish - start
hours, remainder = divmod(elapsed, 3600)
minutes, seconds = divmod(remainder, 60)
if gopts.time:
if hours == 0:
print('real\t%dm%.3fs' % (minutes, seconds), file=sys.stderr)
else:
print('real\t%dh%dm%.3fs' % (hours, minutes, seconds),
file=sys.stderr)
cmd.event_log.FinishEvent(cmd_event, finish,
result is None or result == 0)
git_trace2_event_log.DefParamRepoEvents(
cmd.manifest.manifestProject.config.DumpConfigDict())
git_trace2_event_log.ExitEvent(result)
if gopts.event_log:
cmd.event_log.Write(os.path.abspath(
os.path.expanduser(gopts.event_log)))
git_trace2_event_log.Write(gopts.git_trace2_event_log)
return result
def _CheckWrapperVersion(ver_str, repo_path):
"""Verify the repo launcher is new enough for this checkout.
Args:
ver_str: The version string passed from the repo launcher when it ran us.
repo_path: The path to the repo launcher that loaded us.
"""
# Refuse to work with really old wrapper versions. We don't test these,
# so might as well require a somewhat recent sane version.
# v1.15 of the repo launcher was released in ~Mar 2012.
MIN_REPO_VERSION = (1, 15)
min_str = '.'.join(str(x) for x in MIN_REPO_VERSION)
if not repo_path:
repo_path = '~/bin/repo'
if not ver_str:
print('no --wrapper-version argument', file=sys.stderr)
sys.exit(1)
# Pull out the version of the repo launcher we know about to compare.
exp = Wrapper().VERSION
ver = tuple(map(int, ver_str.split('.')))
exp_str = '.'.join(map(str, exp))
if ver < MIN_REPO_VERSION:
print("""
repo: error:
!!! Your version of repo %s is too old.
!!! We need at least version %s.
!!! A new version of repo (%s) is available.
!!! You must upgrade before you can continue:
cp %s %s
""" % (ver_str, min_str, exp_str, WrapperPath(), repo_path), file=sys.stderr)
sys.exit(1)
if exp > ver:
print('\n... A new version of repo (%s) is available.' % (exp_str,),
file=sys.stderr)
if os.access(repo_path, os.W_OK):
print("""\
... You should upgrade soon:
cp %s %s
""" % (WrapperPath(), repo_path), file=sys.stderr)
else:
print("""\
... New version is available at: %s
... The launcher is run from: %s
!!! The launcher is not writable. Please talk to your sysadmin or distro
!!! to get an update installed.
""" % (WrapperPath(), repo_path), file=sys.stderr)
def _CheckRepoDir(repo_dir):
if not repo_dir:
print('no --repo-dir argument', file=sys.stderr)
sys.exit(1)
def _PruneOptions(argv, opt):
i = 0
while i < len(argv):
a = argv[i]
if a == '--':
break
if a.startswith('--'):
eq = a.find('=')
if eq > 0:
a = a[0:eq]
if not opt.has_option(a):
del argv[i]
continue
i += 1
class _UserAgentHandler(urllib.request.BaseHandler):
def http_request(self, req):
req.add_header('User-Agent', user_agent.repo)
return req
def https_request(self, req):
req.add_header('User-Agent', user_agent.repo)
return req
def _AddPasswordFromUserInput(handler, msg, req):
# If repo could not find auth info from netrc, try to get it from user input
url = req.get_full_url()
user, password = handler.passwd.find_user_password(None, url)
if user is None:
print(msg)
try:
user = input('User: ')
password = getpass.getpass()
except KeyboardInterrupt:
return
handler.passwd.add_password(None, url, user, password)
class _BasicAuthHandler(urllib.request.HTTPBasicAuthHandler):
def http_error_401(self, req, fp, code, msg, headers):
_AddPasswordFromUserInput(self, msg, req)
return urllib.request.HTTPBasicAuthHandler.http_error_401(
self, req, fp, code, msg, headers)
def http_error_auth_reqed(self, authreq, host, req, headers):
try:
old_add_header = req.add_header
def _add_header(name, val):
val = val.replace('\n', '')
old_add_header(name, val)
req.add_header = _add_header
return urllib.request.AbstractBasicAuthHandler.http_error_auth_reqed(
self, authreq, host, req, headers)
except Exception:
reset = getattr(self, 'reset_retry_count', None)
if reset is not None:
reset()
elif getattr(self, 'retried', None):
self.retried = 0
raise
class _DigestAuthHandler(urllib.request.HTTPDigestAuthHandler):
def http_error_401(self, req, fp, code, msg, headers):
_AddPasswordFromUserInput(self, msg, req)
return urllib.request.HTTPDigestAuthHandler.http_error_401(
self, req, fp, code, msg, headers)
def http_error_auth_reqed(self, auth_header, host, req, headers):
try:
old_add_header = req.add_header
def _add_header(name, val):
val = val.replace('\n', '')
old_add_header(name, val)
req.add_header = _add_header
return urllib.request.AbstractDigestAuthHandler.http_error_auth_reqed(
self, auth_header, host, req, headers)
except Exception:
reset = getattr(self, 'reset_retry_count', None)
if reset is not None:
reset()
elif getattr(self, 'retried', None):
self.retried = 0
raise
class _KerberosAuthHandler(urllib.request.BaseHandler):
def __init__(self):
self.retried = 0
self.context = None
self.handler_order = urllib.request.BaseHandler.handler_order - 50
def http_error_401(self, req, fp, code, msg, headers):
host = req.get_host()
retry = self.http_error_auth_reqed('www-authenticate', host, req, headers)
return retry
def http_error_auth_reqed(self, auth_header, host, req, headers):
try:
spn = "HTTP@%s" % host
authdata = self._negotiate_get_authdata(auth_header, headers)
if self.retried > 3:
raise urllib.request.HTTPError(req.get_full_url(), 401,
"Negotiate auth failed", headers, None)
else:
self.retried += 1
neghdr = self._negotiate_get_svctk(spn, authdata)
if neghdr is None:
return None
req.add_unredirected_header('Authorization', neghdr)
response = self.parent.open(req)
srvauth = self._negotiate_get_authdata(auth_header, response.info())
if self._validate_response(srvauth):
return response
except kerberos.GSSError:
return None
except Exception:
self.reset_retry_count()
raise
finally:
self._clean_context()
def reset_retry_count(self):
self.retried = 0
def _negotiate_get_authdata(self, auth_header, headers):
authhdr = headers.get(auth_header, None)
if authhdr is not None:
for mech_tuple in authhdr.split(","):
mech, __, authdata = mech_tuple.strip().partition(" ")
if mech.lower() == "negotiate":
return authdata.strip()
return None
def _negotiate_get_svctk(self, spn, authdata):
if authdata is None:
return None
result, self.context = kerberos.authGSSClientInit(spn)
if result < kerberos.AUTH_GSS_COMPLETE:
return None
result = kerberos.authGSSClientStep(self.context, authdata)
if result < kerberos.AUTH_GSS_CONTINUE:
return None
response = kerberos.authGSSClientResponse(self.context)
return "Negotiate %s" % response
def _validate_response(self, authdata):
if authdata is None:
return None
result = kerberos.authGSSClientStep(self.context, authdata)
if result == kerberos.AUTH_GSS_COMPLETE:
return True
return None
def _clean_context(self):
if self.context is not None:
kerberos.authGSSClientClean(self.context)
self.context = None
def init_http():
handlers = [_UserAgentHandler()]
mgr = urllib.request.HTTPPasswordMgrWithDefaultRealm()
try:
n = netrc.netrc()
for host in n.hosts:
p = n.hosts[host]
mgr.add_password(p[1], 'http://%s/' % host, p[0], p[2])
mgr.add_password(p[1], 'https://%s/' % host, p[0], p[2])
except netrc.NetrcParseError:
pass
except IOError:
pass
handlers.append(_BasicAuthHandler(mgr))
handlers.append(_DigestAuthHandler(mgr))
if kerberos:
handlers.append(_KerberosAuthHandler())
if 'http_proxy' in os.environ:
url = os.environ['http_proxy']
handlers.append(urllib.request.ProxyHandler({'http': url, 'https': url}))
if 'REPO_CURL_VERBOSE' in os.environ:
handlers.append(urllib.request.HTTPHandler(debuglevel=1))
handlers.append(urllib.request.HTTPSHandler(debuglevel=1))
urllib.request.install_opener(urllib.request.build_opener(*handlers))
def _Main(argv):
result = 0
opt = optparse.OptionParser(usage="repo wrapperinfo -- ...")
opt.add_option("--repo-dir", dest="repodir",
help="path to .repo/")
opt.add_option("--wrapper-version", dest="wrapper_version",
help="version of the wrapper script")
opt.add_option("--wrapper-path", dest="wrapper_path",
help="location of the wrapper script")
_PruneOptions(argv, opt)
opt, argv = opt.parse_args(argv)
_CheckWrapperVersion(opt.wrapper_version, opt.wrapper_path)
_CheckRepoDir(opt.repodir)
Version.wrapper_version = opt.wrapper_version
Version.wrapper_path = opt.wrapper_path
repo = _Repo(opt.repodir)
try:
init_http()
name, gopts, argv = repo._ParseArgs(argv)
if gopts.trace:
SetTrace()
if gopts.trace_to_stderr:
SetTraceToStderr()
with Trace('starting new command: %s', ', '.join([name] + argv), first_trace=True):
run = lambda: repo._Run(name, gopts, argv) or 0
if gopts.trace_python:
import trace
tracer = trace.Trace(count=False, trace=True, timing=True,
ignoredirs=set(sys.path[1:]))
result = tracer.runfunc(run)
else:
result = run()
except KeyboardInterrupt:
print('aborted by user', file=sys.stderr)
result = 1
except ManifestParseError as mpe:
print('fatal: %s' % mpe, file=sys.stderr)
result = 1
except RepoChangedException as rce:
# If repo changed, re-exec ourselves.
#
argv = list(sys.argv)
argv.extend(rce.extra_args)
try:
os.execv(sys.executable, [__file__] + argv)
except OSError as e:
print('fatal: cannot restart repo after upgrade', file=sys.stderr)
print('fatal: %s' % e, file=sys.stderr)
result = 128
TerminatePager()
sys.exit(result)
if __name__ == '__main__':
_Main(sys.argv[1:])