/* | |
* FreeRTOS Kernel V10.0.0 | |
* Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
* | |
* Permission is hereby granted, free of charge, to any person obtaining a copy of | |
* this software and associated documentation files (the "Software"), to deal in | |
* the Software without restriction, including without limitation the rights to | |
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
* the Software, and to permit persons to whom the Software is furnished to do so, | |
* subject to the following conditions: | |
* | |
* The above copyright notice and this permission notice shall be included in all | |
* copies or substantial portions of the Software. If you wish to use our Amazon | |
* FreeRTOS name, please do so in a fair use way that does not cause confusion. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
* | |
* http://www.FreeRTOS.org | |
* http://aws.amazon.com/freertos | |
* | |
* 1 tab == 4 spaces! | |
*/ | |
/* | |
* Copyright (c) 2015-2019 Cadence Design Systems, Inc. | |
* | |
* Permission is hereby granted, free of charge, to any person obtaining | |
* a copy of this software and associated documentation files (the | |
* "Software"), to deal in the Software without restriction, including | |
* without limitation the rights to use, copy, modify, merge, publish, | |
* distribute, sublicense, and/or sell copies of the Software, and to | |
* permit persons to whom the Software is furnished to do so, subject to | |
* the following conditions: | |
* | |
* The above copyright notice and this permission notice shall be included | |
* in all copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | |
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | |
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. | |
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY | |
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, | |
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE | |
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
*/ | |
#ifndef PORTMACRO_H | |
#define PORTMACRO_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#ifndef __ASSEMBLER__ | |
#include <stdint.h> | |
#include <xtensa/tie/xt_core.h> | |
#include <xtensa/hal.h> | |
#include <xtensa/config/core.h> | |
#include <xtensa/config/system.h> /* required for XSHAL_CLIB */ | |
#include <xtensa/xtruntime.h> | |
/*#include "xtensa_context.h" */ | |
/*----------------------------------------------------------- | |
* Port specific definitions. | |
* | |
* The settings in this file configure FreeRTOS correctly for the | |
* given hardware and compiler. | |
* | |
* These settings should not be altered. | |
*----------------------------------------------------------- | |
*/ | |
/* Type definitions. */ | |
#define portCHAR int8_t | |
#define portFLOAT float | |
#define portDOUBLE double | |
#define portLONG int32_t | |
#define portSHORT int16_t | |
#define portSTACK_TYPE uint32_t | |
#define portBASE_TYPE int | |
typedef portSTACK_TYPE StackType_t; | |
typedef portBASE_TYPE BaseType_t; | |
typedef unsigned portBASE_TYPE UBaseType_t; | |
#if ( configUSE_16_BIT_TICKS == 1 ) | |
typedef uint16_t TickType_t; | |
#define portMAX_DELAY ( TickType_t ) 0xffff | |
#else | |
typedef uint32_t TickType_t; | |
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL | |
#endif | |
/*-----------------------------------------------------------*/ | |
/* portbenchmark */ | |
#include "portbenchmark.h" | |
/* Critical section management. NW-TODO: replace XTOS_SET_INTLEVEL with more efficient version, if any? */ | |
/* These cannot be nested. They should be used with a lot of care and cannot be called from interrupt level. */ | |
#define portDISABLE_INTERRUPTS() do { XTOS_SET_INTLEVEL( XCHAL_EXCM_LEVEL ); portbenchmarkINTERRUPT_DISABLE(); } while( 0 ) | |
#define portENABLE_INTERRUPTS() do { portbenchmarkINTERRUPT_RESTORE( 0 ); XTOS_SET_INTLEVEL( 0 ); } while( 0 ) | |
/* These can be nested */ | |
#define portCRITICAL_NESTING_IN_TCB 1 /* For now, let FreeRTOS' (tasks.c) manage critical nesting */ | |
void vTaskEnterCritical( void ); | |
void vTaskExitCritical( void ); | |
#define portENTER_CRITICAL() vTaskEnterCritical() | |
#define portEXIT_CRITICAL() vTaskExitCritical() | |
/* Cleaner and preferred solution allows nested interrupts disabling and restoring via local registers or stack. */ | |
/* They can be called from interrupts too. */ | |
static inline unsigned portENTER_CRITICAL_NESTED() | |
{ | |
unsigned state = XTOS_SET_INTLEVEL( XCHAL_EXCM_LEVEL ); | |
portbenchmarkINTERRUPT_DISABLE(); | |
return state; | |
} | |
#define portEXIT_CRITICAL_NESTED( state ) do { portbenchmarkINTERRUPT_RESTORE( state ); XTOS_RESTORE_JUST_INTLEVEL( state ); } while( 0 ) | |
/* These FreeRTOS versions are similar to the nested versions above */ | |
#define portSET_INTERRUPT_MASK_FROM_ISR() portENTER_CRITICAL_NESTED() | |
#define portCLEAR_INTERRUPT_MASK_FROM_ISR( state ) portEXIT_CRITICAL_NESTED( state ) | |
/*-----------------------------------------------------------*/ | |
/* Architecture specifics. */ | |
#define portSTACK_GROWTH ( -1 ) | |
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) | |
#define portBYTE_ALIGNMENT 4 | |
#define portNOP() XT_NOP() | |
/*-----------------------------------------------------------*/ | |
/* Fine resolution time */ | |
#define portGET_RUN_TIME_COUNTER_VALUE() xthal_get_ccount() | |
/* Kernel utilities. */ | |
void vPortYield( void ); | |
void _frxt_setup_switch( void ); | |
#define portYIELD() vPortYield() | |
#define portYIELD_FROM_ISR( xHigherPriorityTaskWoken ) \ | |
if( ( xHigherPriorityTaskWoken ) != 0 ) { \ | |
_frxt_setup_switch(); \ | |
} | |
/*-----------------------------------------------------------*/ | |
/* Task function macros as described on the FreeRTOS.org WEB site. */ | |
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters ) | |
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters ) | |
/* When coprocessors are defined, we to maintain a pointer to coprocessors area. */ | |
/* We currently use a hack: redefine field xMPU_SETTINGS in TCB block as a structure that can hold: */ | |
/* MPU wrappers, coprocessor area pointer, trace code structure, and more if needed. */ | |
/* The field is normally used for memory protection. FreeRTOS should create another general purpose field. */ | |
typedef struct | |
{ | |
#if XCHAL_CP_NUM > 0 | |
volatile StackType_t * coproc_area; /* Pointer to coprocessor save area; MUST BE FIRST */ | |
#endif | |
#if portUSING_MPU_WRAPPERS | |
/* Define here mpu_settings, which is port dependent */ | |
int mpu_setting; /* Just a dummy example here; MPU not ported to Xtensa yet */ | |
#endif | |
#if configUSE_TRACE_FACILITY_2 | |
struct | |
{ | |
/* Cf. porttraceStamp() */ | |
int taskstamp; /* Stamp from inside task to see where we are */ | |
int taskstampcount; /* A counter usually incremented when we restart the task's loop */ | |
} porttrace; | |
#endif | |
} xMPU_SETTINGS; | |
/* Main hack to use MPU_wrappers even when no MPU is defined (warning: mpu_setting should not be accessed; otherwise move this above xMPU_SETTINGS) */ | |
#if ( XCHAL_CP_NUM > 0 || configUSE_TRACE_FACILITY_2 ) && !portUSING_MPU_WRAPPERS /* If MPU wrappers not used, we still need to allocate coproc area */ | |
#undef portUSING_MPU_WRAPPERS | |
#define portUSING_MPU_WRAPPERS 1 /* Enable it to allocate coproc area */ | |
#define MPU_WRAPPERS_H /* Override mpu_wrapper.h to disable unwanted code */ | |
#define PRIVILEGED_FUNCTION | |
#define PRIVILEGED_DATA | |
#endif | |
/* porttrace */ | |
#if configUSE_TRACE_FACILITY_2 | |
#include "porttrace.h" | |
#endif | |
/* configASSERT_2 if requested */ | |
#if configASSERT_2 | |
#include <stdio.h> | |
void exit( int ); | |
#define configASSERT( x ) if( !( x ) ) { porttracePrint( -1 ); printf( "\nAssertion failed in %s:%d\n", __FILE__, __LINE__ ); exit( -1 ); } | |
#endif | |
/* C library support -- only XCLIB and NEWLIB are supported. */ | |
/* To enable thread-safe C library support, XT_USE_THREAD_SAFE_CLIB must be | |
* defined to be > 0 somewhere above or on the command line. */ | |
#if ( XT_USE_THREAD_SAFE_CLIB > 0u ) && ( XSHAL_CLIB == XTHAL_CLIB_XCLIB ) | |
extern void vPortClibInit( void ); | |
/* No cleanup necessary at this time. */ | |
#define portCLEAN_UP_TCB( pxTCB ) | |
#endif // XCLIB support | |
#if ( XT_USE_THREAD_SAFE_CLIB > 0u ) && ( XSHAL_CLIB == XTHAL_CLIB_NEWLIB ) | |
extern void vPortClibInit( void ); | |
/* This C library cleanup is not currently done by FreeRTOS when deleting a task */ | |
#include <stdio.h> | |
#define portCLEAN_UP_TCB( pxTCB ) vPortCleanUpTcbClib( &( ( pxTCB )->xNewLib_reent ) ) | |
static inline void vPortCleanUpTcbClib( struct _reent * ptr ) | |
{ | |
FILE * fp = &( ptr->__sf[ 0 ] ); | |
int i; | |
for( i = 0; i < 3; ++i, ++fp ) | |
{ | |
fp->_close = NULL; | |
} | |
} | |
#endif // NEWLIB support | |
#endif // __ASSEMBLER__ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* PORTMACRO_H */ |