/* | |
FreeRTOS V7.0.0 - Copyright (C) 2011 Real Time Engineers Ltd. | |
*************************************************************************** | |
* * | |
* FreeRTOS tutorial books are available in pdf and paperback. * | |
* Complete, revised, and edited pdf reference manuals are also * | |
* available. * | |
* * | |
* Purchasing FreeRTOS documentation will not only help you, by * | |
* ensuring you get running as quickly as possible and with an * | |
* in-depth knowledge of how to use FreeRTOS, it will also help * | |
* the FreeRTOS project to continue with its mission of providing * | |
* professional grade, cross platform, de facto standard solutions * | |
* for microcontrollers - completely free of charge! * | |
* * | |
* >>> See http://www.FreeRTOS.org/Documentation for details. <<< * | |
* * | |
* Thank you for using FreeRTOS, and thank you for your support! * | |
* * | |
*************************************************************************** | |
This file is part of the FreeRTOS distribution. | |
FreeRTOS is free software; you can redistribute it and/or modify it under | |
the terms of the GNU General Public License (version 2) as published by the | |
Free Software Foundation AND MODIFIED BY the FreeRTOS exception. | |
>>>NOTE<<< The modification to the GPL is included to allow you to | |
distribute a combined work that includes FreeRTOS without being obliged to | |
provide the source code for proprietary components outside of the FreeRTOS | |
kernel. FreeRTOS is distributed in the hope that it will be useful, but | |
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
more details. You should have received a copy of the GNU General Public | |
License and the FreeRTOS license exception along with FreeRTOS; if not it | |
can be viewed here: http://www.freertos.org/a00114.html and also obtained | |
by writing to Richard Barry, contact details for whom are available on the | |
FreeRTOS WEB site. | |
1 tab == 4 spaces! | |
http://www.FreeRTOS.org - Documentation, latest information, license and | |
contact details. | |
http://www.SafeRTOS.com - A version that is certified for use in safety | |
critical systems. | |
http://www.OpenRTOS.com - Commercial support, development, porting, | |
licensing and training services. | |
*/ | |
/* | |
BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR UART0. | |
*/ | |
/*----------------------------------------------------------- | |
* Components that can be compiled to either ARM or THUMB mode are | |
* contained in this file.c The ISR routines, which can only be compiled | |
* to ARM mode, are contained in serialISR.c. | |
*----------------------------------------------------------*/ | |
/* Library includes. */ | |
#include "75x_uart.h" | |
#include "75x_gpio.h" | |
#include "75x_eic.h" | |
#include "75x_mrcc.h" | |
/* Scheduler includes. */ | |
#include "FreeRTOS.h" | |
#include "queue.h" | |
/* Demo application includes. */ | |
#include "serial.h" | |
#define serINVALID_QUEUE ( ( xQueueHandle ) 0 ) | |
#define serNO_BLOCK ( ( portTickType ) 0 ) | |
/*-----------------------------------------------------------*/ | |
/* Queues used to hold received characters, and characters waiting to be | |
transmitted. */ | |
static xQueueHandle xRxedChars; | |
static xQueueHandle xCharsForTx; | |
static volatile portBASE_TYPE xQueueEmpty = pdTRUE; | |
/*-----------------------------------------------------------*/ | |
/* The interrupt service routine - called from the assembly entry point. */ | |
void vSerialISR( void ); | |
void vConfigureQueues( xQueueHandle xQForRx, xQueueHandle xQForTx, volatile portBASE_TYPE *pxEmptyFlag ); | |
/*-----------------------------------------------------------*/ | |
/* | |
* See the serial2.h header file. | |
*/ | |
xComPortHandle xSerialPortInitMinimal( unsigned long ulWantedBaud, unsigned portBASE_TYPE uxQueueLength ) | |
{ | |
xComPortHandle xReturn; | |
UART_InitTypeDef UART_InitStructure; | |
GPIO_InitTypeDef GPIO_InitStructure; | |
EIC_IRQInitTypeDef EIC_IRQInitStructure; | |
/* Create the queues used to hold Rx and Tx characters. */ | |
xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); | |
xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); | |
/* If the queues were created correctly then setup the serial port | |
hardware. */ | |
if( ( xRxedChars != serINVALID_QUEUE ) && ( xCharsForTx != serINVALID_QUEUE ) ) | |
{ | |
vConfigureQueues( xRxedChars, xCharsForTx, &xQueueEmpty ); | |
portENTER_CRITICAL(); | |
{ | |
/* Enable the UART0 Clock. */ | |
MRCC_PeripheralClockConfig( MRCC_Peripheral_UART0, ENABLE ); | |
/* Configure the UART0_Tx as alternate function */ | |
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; | |
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11; | |
GPIO_Init(GPIO0, &GPIO_InitStructure); | |
/* Configure the UART0_Rx as input floating */ | |
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; | |
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; | |
GPIO_Init(GPIO0, &GPIO_InitStructure); | |
/* Configure UART0. */ | |
UART_InitStructure.UART_WordLength = UART_WordLength_8D; | |
UART_InitStructure.UART_StopBits = UART_StopBits_1; | |
UART_InitStructure.UART_Parity = UART_Parity_No; | |
UART_InitStructure.UART_BaudRate = ulWantedBaud; | |
UART_InitStructure.UART_HardwareFlowControl = UART_HardwareFlowControl_None; | |
UART_InitStructure.UART_Mode = UART_Mode_Tx_Rx; | |
UART_InitStructure.UART_TxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */ | |
UART_InitStructure.UART_RxFIFOLevel = UART_FIFOLevel_1_2; /* FIFO size 16 bytes, FIFO level 8 bytes */ | |
UART_Init(UART0, &UART_InitStructure); | |
/* Enable the UART0 */ | |
UART_Cmd(UART0, ENABLE); | |
/* Configure the IEC for the UART interrupts. */ | |
EIC_IRQInitStructure.EIC_IRQChannelCmd = ENABLE; | |
EIC_IRQInitStructure.EIC_IRQChannel = UART0_IRQChannel; | |
EIC_IRQInitStructure.EIC_IRQChannelPriority = 1; | |
EIC_IRQInit(&EIC_IRQInitStructure); | |
xQueueEmpty = pdTRUE; | |
UART_ITConfig( UART0, UART_IT_Transmit | UART_IT_Receive, ENABLE ); | |
} | |
portEXIT_CRITICAL(); | |
} | |
else | |
{ | |
xReturn = ( xComPortHandle ) 0; | |
} | |
/* This demo file only supports a single port but we have to return | |
something to comply with the standard demo header file. */ | |
return xReturn; | |
} | |
/*-----------------------------------------------------------*/ | |
signed portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, signed char *pcRxedChar, portTickType xBlockTime ) | |
{ | |
/* The port handle is not required as this driver only supports one port. */ | |
( void ) pxPort; | |
/* Get the next character from the buffer. Return false if no characters | |
are available, or arrive before xBlockTime expires. */ | |
if( xQueueReceive( xRxedChars, pcRxedChar, xBlockTime ) ) | |
{ | |
return pdTRUE; | |
} | |
else | |
{ | |
return pdFALSE; | |
} | |
} | |
/*-----------------------------------------------------------*/ | |
void vSerialPutString( xComPortHandle pxPort, const signed char * const pcString, unsigned short usStringLength ) | |
{ | |
signed char *pxNext; | |
/* A couple of parameters that this port does not use. */ | |
( void ) usStringLength; | |
( void ) pxPort; | |
/* NOTE: This implementation does not handle the queue being full as no | |
block time is used! */ | |
/* The port handle is not required as this driver only supports UART0. */ | |
( void ) pxPort; | |
/* Send each character in the string, one at a time. */ | |
pxNext = ( signed char * ) pcString; | |
while( *pxNext ) | |
{ | |
xSerialPutChar( pxPort, *pxNext, serNO_BLOCK ); | |
pxNext++; | |
} | |
} | |
/*-----------------------------------------------------------*/ | |
signed portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, signed char cOutChar, portTickType xBlockTime ) | |
{ | |
portBASE_TYPE xReturn; | |
/* Place the character in the queue of characters to be transmitted. */ | |
portENTER_CRITICAL(); | |
{ | |
if( xQueueEmpty == pdTRUE ) | |
{ | |
UART0->DR = cOutChar; | |
xReturn = pdPASS; | |
} | |
else | |
{ | |
if( xQueueSend( xCharsForTx, &cOutChar, xBlockTime ) != pdPASS ) | |
{ | |
xReturn = pdFAIL; | |
} | |
else | |
{ | |
xReturn = pdPASS; | |
} | |
} | |
xQueueEmpty = pdFALSE; | |
} | |
portEXIT_CRITICAL(); | |
return xReturn; | |
} | |
/*-----------------------------------------------------------*/ | |
void vSerialClose( xComPortHandle xPort ) | |
{ | |
/* Not supported as not required by the demo application. */ | |
} | |
/*-----------------------------------------------------------*/ | |