blob: 45c12faca6c459c250cc1c281fab9523aba6ec6b [file] [log] [blame]
/*
FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation and modified by the FreeRTOS exception.
**NOTE** The exception to the GPL is included to allow you to distribute a
combined work that includes FreeRTOS without being obliged to provide the
source code for proprietary components outside of the FreeRTOS kernel.
Alternative commercial license and support terms are also available upon
request. See the licensing section of http://www.FreeRTOS.org for full
license details.
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA.
***************************************************************************
* *
* Looking for a quick start? Then check out the FreeRTOS eBook! *
* See http://www.FreeRTOS.org/Documentation for details *
* *
***************************************************************************
1 tab == 4 spaces!
Please ensure to read the configuration and relevant port sections of the
online documentation.
http://www.FreeRTOS.org - Documentation, latest information, license and
contact details.
http://www.SafeRTOS.com - A version that is certified for use in safety
critical systems.
http://www.OpenRTOS.com - Commercial support, development, porting,
licensing and training services.
*/
#include <stdlib.h>
#include <embedded.h>
#include "FreeRTOS.h"
#include "portasm.h"
#include "queue.h"
#include "task.h"
#include "semphr.h"
#define serMAX_PORTS ( ( unsigned portSHORT ) 2 )
#define serPORT_0_INT_REG ( 0xff44 )
#define serPORT_0_BAUD_REG ( 0xff88 )
#define serPORT_0_RX_REG ( 0xff86 )
#define serPORT_0_TX_REG ( 0xff84 )
#define serPORT_0_STATUS_REG ( 0xff82 )
#define serPORT_0_CTRL_REG ( 0xff80 )
#define serPORT_0_IRQ ( 0x14 )
#define serPORT_1_INT_REG ( 0xff42 )
#define serPORT_1_BAUD_REG ( 0xff18 )
#define serPORT_1_RX_REG ( 0xff16 )
#define serPORT_1_TX_REG ( 0xff14 )
#define serPORT_1_STATUS_REG ( 0xff12 )
#define serPORT_1_CTRL_REG ( 0xff10 )
#define serPORT_1_IRQ ( 0x11 )
#define serTX_EMPTY ( ( unsigned portSHORT ) 0x40 )
#define serRX_READY ( ( unsigned portSHORT ) 0x80 )
#define serRESET_PIC( usEOI_TYPE ) portOUTPUT_WORD( ( unsigned portSHORT ) 0xff22, usEOI_TYPE )
#define serTX_HOLD_EMPTY_INT ( ( unsigned portSHORT ) 0x100 )
#define serENABLE_INTERRUPTS ( ( unsigned portSHORT ) 0x80 )
#define serMODE ( ( unsigned portSHORT ) 0x01 )
#define serENABLE_TX_MACHINES ( ( unsigned portSHORT ) 0x40 )
#define serENABLE_RX_MACHINES ( ( unsigned portSHORT ) 0x20 )
#define serINTERRUPT_MASK ( ( unsigned portSHORT ) 0x08 )
#define serCLEAR_ALL_STATUS_BITS ( ( unsigned portSHORT ) 0x00 )
#define serINTERRUPT_PRIORITY ( ( unsigned portSHORT ) 0x01 ) /*< Just below the scheduler priority. */
#define serDONT_BLOCK ( ( portTickType ) 0 )
typedef enum
{
serCOM1 = 0,
serCOM2,
serCOM3,
serCOM4,
serCOM5,
serCOM6,
serCOM7,
serCOM8
} eCOMPort;
typedef enum
{
serNO_PARITY,
serODD_PARITY,
serEVEN_PARITY,
serMARK_PARITY,
serSPACE_PARITY
} eParity;
typedef enum
{
serSTOP_1,
serSTOP_2
} eStopBits;
typedef enum
{
serBITS_5,
serBITS_6,
serBITS_7,
serBITS_8
} eDataBits;
typedef enum
{
ser50 = 0,
ser75,
ser110,
ser134,
ser150,
ser200,
ser300,
ser600,
ser1200,
ser1800,
ser2400,
ser4800,
ser9600,
ser19200,
ser38400,
ser57600,
ser115200
} eBaud;
typedef struct xCOM_PORT
{
/* Hardware parameters for this port. */
portSHORT sTxInterruptOn;
unsigned portSHORT usIntReg;
unsigned portSHORT usBaudReg;
unsigned portSHORT usRxReg;
unsigned portSHORT usTxReg;
unsigned portSHORT usStatusReg;
unsigned portSHORT usCtrlReg;
unsigned portSHORT usIRQVector;
/* Queues used for communications with com test task. */
xQueueHandle xRxedChars;
xQueueHandle xCharsForTx;
/* This semaphore does nothing useful except test a feature of the
scheduler. */
xSemaphoreHandle xTestSem;
} xComPort;
static xComPort xPorts[ serMAX_PORTS ] =
{
{ pdFALSE, serPORT_0_INT_REG, serPORT_0_BAUD_REG, serPORT_0_RX_REG, serPORT_0_TX_REG, serPORT_0_STATUS_REG, serPORT_0_CTRL_REG, serPORT_0_IRQ, NULL, NULL, NULL },
{ pdFALSE, serPORT_1_INT_REG, serPORT_1_BAUD_REG, serPORT_1_RX_REG, serPORT_1_TX_REG, serPORT_1_STATUS_REG, serPORT_1_CTRL_REG, serPORT_1_IRQ, NULL, NULL, NULL }
};
typedef xComPort * xComPortHandle;
/**
* Lookup the baud rate from the enum.
*/
static unsigned portLONG prvBaud( eBaud eWantedBaud );
/* These prototypes are repeated here so we don't have to include the serial header. This allows
the xComPortHandle structure details to be private to this file. */
xComPortHandle xSerialPortInit( eCOMPort ePort, eBaud eWantedBaud, eParity eWantedParity, eDataBits eWantedDataBits, eStopBits eWantedStopBits, unsigned portBASE_TYPE uxBufferLength );
portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, portCHAR *pcRxedChar, portTickType xBlockTime );
portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, portCHAR cOutChar, portTickType xBlockTime );
void vSerialClose( xComPortHandle xPort );
portSHORT sSerialWaitForSemaphore( xComPortHandle xPort );
/*-----------------------------------------------------------*/
static portSHORT xComPortISR( xComPort * const pxPort );
#define vInterruptOn( pxPort, usInterrupt ) \
{ \
unsigned portSHORT usIn; \
\
portENTER_CRITICAL(); \
{ \
if( pxPort->sTxInterruptOn == pdFALSE ) \
{ \
usIn = portINPUT_WORD( pxPort->usCtrlReg ); \
portOUTPUT_WORD( pxPort->usCtrlReg, usIn | usInterrupt ); \
\
pxPort->sTxInterruptOn = pdTRUE; \
} \
} \
portEXIT_CRITICAL(); \
}
/*-----------------------------------------------------------*/
#define vInterruptOff( pxPort, usInterrupt ) \
{ \
unsigned portSHORT usIn = portINPUT_WORD( pxPort->usCtrlReg ); \
if( usIn & usInterrupt ) \
{ \
portOUTPUT_WORD( pxPort->usCtrlReg, usIn & ~usInterrupt); \
pxPort->sTxInterruptOn = pdFALSE; \
} \
}
/*-----------------------------------------------------------*/
/* Define an interrupt handler for each port */
#define COM_IRQ_WRAPPER(N) \
static void __interrupt COM_IRQ##N##_WRAPPER( void ) \
{ \
if( xComPortISR( &( xPorts[##N##] ) ) ) \
{ \
portEND_SWITCHING_ISR(); \
} \
}
COM_IRQ_WRAPPER( 0 )
COM_IRQ_WRAPPER( 1 )
static pxISR xISRs[ serMAX_PORTS ] =
{
COM_IRQ0_WRAPPER,
COM_IRQ1_WRAPPER
};
/*-----------------------------------------------------------*/
static unsigned portLONG prvBaud( eBaud eWantedBaud )
{
switch( eWantedBaud )
{
case ser50 : return 50UL;
case ser75 : return 75UL;
case ser110 : return 110UL;
case ser134 : return 134UL;
case ser150 : return 150UL;
case ser200 : return 200UL;
case ser300 : return 300UL;
case ser600 : return 600UL;
case ser1200 : return 1200UL;
case ser1800 : return 1800UL;
case ser2400 : return 2400UL;
case ser4800 : return 4800UL;
case ser19200 : return 19200UL;
case ser38400 : return 38400UL;
case ser57600 : return 57600UL;
case ser115200 : return 115200UL;
default : return 9600UL;
}
}
/*-----------------------------------------------------------*/
xComPortHandle xSerialPortInit( eCOMPort ePort, eBaud eWantedBaud, eParity eWantedParity, eDataBits eWantedDataBits, eStopBits eWantedStopBits, unsigned portBASE_TYPE uxBufferLength )
{
unsigned portSHORT usPort;
xComPortHandle pxPort = NULL;
unsigned portLONG ulBaudDiv;
/* BAUDDIV = ( Microprocessor Clock / Baud Rate ) / 16 */
ulBaudDiv = ( configCPU_CLOCK_HZ / prvBaud( eWantedBaud ) ) / 16UL;
/* Only n, 8, 1 is supported so these parameters are not required for this
port. */
( void ) eWantedParity;
( void ) eWantedDataBits;
( void ) eWantedStopBits;
/* Currently only n,8,1 is supported. */
usPort = ( unsigned portSHORT ) ePort;
if( usPort < serMAX_PORTS )
{
pxPort = &( xPorts[ usPort ] );
portENTER_CRITICAL();
{
unsigned portSHORT usInWord;
/* Create the queues used by the com test task. */
pxPort->xRxedChars = xQueueCreate( uxBufferLength, ( unsigned portBASE_TYPE ) sizeof( portCHAR ) );
pxPort->xCharsForTx = xQueueCreate( uxBufferLength, ( unsigned portBASE_TYPE ) sizeof( portCHAR ) );
/* Create the test semaphore. This does nothing useful except test a feature of the scheduler. */
vSemaphoreCreateBinary( pxPort->xTestSem );
/* There is no ISR here already to restore later. */
setvect( ( portSHORT ) pxPort->usIRQVector, xISRs[ usPort ] );
usInWord = portINPUT_WORD( pxPort->usIntReg );
usInWord &= ~serINTERRUPT_MASK;
usInWord |= serINTERRUPT_PRIORITY;
portOUTPUT_WORD( pxPort->usIntReg, usInWord );
portOUTPUT_WORD( pxPort->usBaudReg, ( unsigned portSHORT ) ulBaudDiv );
portOUTPUT_WORD( pxPort->usCtrlReg, serENABLE_INTERRUPTS | serMODE | serENABLE_TX_MACHINES | serENABLE_RX_MACHINES );
portOUTPUT_WORD( pxPort->usStatusReg, serCLEAR_ALL_STATUS_BITS );
}
portEXIT_CRITICAL();
}
return pxPort;
} /*lint !e715 Some parameters are not used as only a subset of the serial port functionality is currently implemented. */
/*-----------------------------------------------------------*/
void vSerialPutString( xComPortHandle pxPort, const portCHAR * const pcString, unsigned portSHORT usStringLength )
{
unsigned portSHORT usByte;
portCHAR *pcNextChar;
pcNextChar = ( portCHAR * ) pcString;
for( usByte = 0; usByte < usStringLength; usByte++ )
{
xQueueSend( pxPort->xCharsForTx, pcNextChar, serDONT_BLOCK );
pcNextChar++;
}
vInterruptOn( pxPort, serTX_HOLD_EMPTY_INT );
}
/*-----------------------------------------------------------*/
portBASE_TYPE xSerialGetChar( xComPortHandle pxPort, portCHAR *pcRxedChar, portTickType xBlockTime )
{
/* Get the next character from the buffer, note that this routine is only
called having checked that the is (at least) one to get */
if( xQueueReceive( pxPort->xRxedChars, pcRxedChar, xBlockTime ) )
{
return pdTRUE;
}
else
{
return pdFALSE;
}
}
/*-----------------------------------------------------------*/
portBASE_TYPE xSerialPutChar( xComPortHandle pxPort, portCHAR cOutChar, portTickType xBlockTime )
{
if( xQueueSend( pxPort->xCharsForTx, &cOutChar, xBlockTime ) != pdPASS )
{
return pdFAIL;
}
vInterruptOn( pxPort, serTX_HOLD_EMPTY_INT );
return pdPASS;
}
/*-----------------------------------------------------------*/
portBASE_TYPE xSerialWaitForSemaphore( xComPortHandle xPort )
{
const portTickType xBlockTime = ( portTickType ) 0xffff;
/* This function does nothing interesting, but test the
semaphore from ISR mechanism. */
return xSemaphoreTake( xPort->xTestSem, xBlockTime );
}
/*-----------------------------------------------------------*/
void vSerialClose( xComPortHandle xPort )
{
unsigned portSHORT usOutput;
/* Turn off the interrupts. We may also want to delete the queues and/or
re-install the original ISR. */
portENTER_CRITICAL();
{
usOutput = portINPUT_WORD( xPort->usCtrlReg );
usOutput &= ~serENABLE_INTERRUPTS;
usOutput &= ~serENABLE_TX_MACHINES;
usOutput &= ~serENABLE_RX_MACHINES;
portOUTPUT_WORD( xPort->usCtrlReg, usOutput );
usOutput = portINPUT_WORD( xPort->usIntReg );
usOutput |= serINTERRUPT_MASK;
portOUTPUT_WORD( xPort->usIntReg, usOutput );
}
portEXIT_CRITICAL();
}
/*-----------------------------------------------------------*/
unsigned short usStatus;
static portBASE_TYPE xComPortISR( xComPort * const pxPort )
{
unsigned portSHORT usStatusRegister;
portCHAR cChar;
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE;
/* NOTE: THIS IS NOT AN EFFICIENT ISR AS IT IS DESIGNED SOLELY TO TEST
THE SCHEDULER FUNCTIONALITY. REAL APPLICATIONS SHOULD NOT USE THIS
FUNCTION. */
usStatusRegister = portINPUT_WORD( pxPort->usStatusReg );
if( usStatusRegister & serRX_READY )
{
cChar = ( portCHAR ) portINPUT_WORD( pxPort->usRxReg );
xQueueSendFromISR( pxPort->xRxedChars, &cChar, &xHigherPriorityTaskWoken );
/* Also release the semaphore - this does nothing interesting and is just a test. */
xSemaphoreGiveFromISR( pxPort->xTestSem, &xHigherPriorityTaskWoken );
}
else if( pxPort->sTxInterruptOn && ( usStatusRegister & serTX_EMPTY ) )
{
if( xQueueReceiveFromISR( pxPort->xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE )
{
portOUTPUT_WORD( pxPort->usTxReg, ( unsigned portSHORT ) cChar );
}
else
{
/* Queue empty, nothing to send */
vInterruptOff( pxPort, serTX_HOLD_EMPTY_INT );
}
}
serRESET_PIC( pxPort->usIRQVector );
/* If posting to the queue woke a task that was blocked on the queue we may
want to switch to the woken task - depending on its priority relative to
the task interrupted by this ISR. */
return xHigherPriorityTaskWoken;
}