Demo/AVR32_UC3/FreeRTOSConfig.h - third_party/github/FreeRTOS/FreeRTOS-Kernel - Git at Google

 /*This file is prepared for Doxygen automatic documentation generation.*/
 /*! \file *********************************************************************
  *
  * \brief FreeRTOS demonstration for AVR32 UC3.
  *
  * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
  * - Supported devices:  All AVR32 devices can be used.
  * - AppNote:
  *
  * \author               Atmel Corporation: http://www.atmel.com \n
  *                       Support and FAQ: http://support.atmel.no/
  *
  ******************************************************************************/

 /* Copyright (c) 2007, Atmel Corporation All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  * 1. Redistributions of source code must retain the above copyright notice,
  * this list of conditions and the following disclaimer.
  *
  * 2. Redistributions in binary form must reproduce the above copyright notice,
  * this list of conditions and the following disclaimer in the documentation
  * and/or other materials provided with the distribution.
  *
  * 3. The name of ATMEL may not be used to endorse or promote products derived
  * from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
  * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */


 #ifndef FREERTOS_CONFIG_H
 #define FREERTOS_CONFIG_H

 #include "board.h"


 /*-----------------------------------------------------------
  * Application specific definitions.
  *
  * These definitions should be adjusted for your particular hardware and
  * application requirements.
  *
  * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
  * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
  *
  * See http://www.freertos.org/a00110.html.
  *----------------------------------------------------------*/

 #define configUSE_PREEMPTION      1
 #define configUSE_IDLE_HOOK       0
 #define configUSE_TICK_HOOK       0
 #define configCPU_CLOCK_HZ        ( FOSC0 ) /* Hz clk gen */
 #define configPBA_CLOCK_HZ        ( FOSC0 )
 #define configTICK_RATE_HZ        ( ( portTickType ) 1000 )
 #define configMAX_PRIORITIES      ( ( unsigned portBASE_TYPE ) 8 )
 #define configMINIMAL_STACK_SIZE  ( ( unsigned portSHORT ) 128 )
 /* configTOTAL_HEAP_SIZE is not used when heap_3.c is used. */
 #define configTOTAL_HEAP_SIZE     ( ( size_t ) ( 1024*25 ) )
 #define configMAX_TASK_NAME_LEN   ( 16 )
 #define configUSE_TRACE_FACILITY  0
 #define configUSE_16_BIT_TICKS    0
 #define configIDLE_SHOULD_YIELD   1

 /* Co-routine definitions. */
 #define configUSE_CO_ROUTINES     0
 #define configMAX_CO_ROUTINE_PRIORITIES ( 0 )

 /* Set the following definitions to 1 to include the API function, or zero
 to exclude the API function. */

 #define INCLUDE_vTaskPrioritySet            1
 #define INCLUDE_uxTaskPriorityGet           1
 #define INCLUDE_vTaskDelete                 1
 #define INCLUDE_vTaskCleanUpResources       0
 #define INCLUDE_vTaskSuspend                1
 #define INCLUDE_vTaskDelayUntil             1
 #define INCLUDE_vTaskDelay                  1
 #define INCLUDE_xTaskGetCurrentTaskHandle   0
 #define INCLUDE_xTaskGetSchedulerState		1

 /* configTICK_USE_TC is a boolean indicating whether to use a Timer Counter
    for the tick generation. Timer Counter will generate an accurate Tick;
    otherwise the CPU will generate a tick but with time drift.
    configTICK_TC_CHANNEL is the TC channel. */
 #define configTICK_USE_TC             1
 #define configTICK_TC_CHANNEL         2

 /* configHEAP_INIT is a boolean indicating whether to initialize the heap with
    0xA5 in order to be able to determine the maximal heap consumption. */
 #define configHEAP_INIT               0

 /* Debug trace configuration.
    configDBG is a boolean indicating whether to activate the debug trace. */
 #if BOARD == EVK1100
 #define configDBG                     1
 #define configDBG_USART               (&AVR32_USART1)
 #define configDBG_USART_RX_PIN        AVR32_USART1_RXD_0_PIN
 #define configDBG_USART_RX_FUNCTION   AVR32_USART1_RXD_0_FUNCTION
 #define configDBG_USART_TX_PIN        AVR32_USART1_TXD_0_PIN
 #define configDBG_USART_TX_FUNCTION   AVR32_USART1_TXD_0_FUNCTION
 #define configDBG_USART_BAUDRATE      57600
 #define serialPORT_USART              (&AVR32_USART0)
 #define serialPORT_USART_RX_PIN       AVR32_USART0_RXD_0_PIN
 #define serialPORT_USART_RX_FUNCTION  AVR32_USART0_RXD_0_FUNCTION
 #define serialPORT_USART_TX_PIN       AVR32_USART0_TXD_0_PIN
 #define serialPORT_USART_TX_FUNCTION  AVR32_USART0_TXD_0_FUNCTION
 #define serialPORT_USART_IRQ          AVR32_USART0_IRQ
 #define serialPORT_USART_BAUDRATE     57600
 #elif BOARD == EVK1101
 #define configDBG                     1
 #define configDBG_USART               (&AVR32_USART1)
 #define configDBG_USART_RX_PIN        AVR32_USART1_RXD_0_0_PIN
 #define configDBG_USART_RX_FUNCTION   AVR32_USART1_RXD_0_0_FUNCTION
 #define configDBG_USART_TX_PIN        AVR32_USART1_TXD_0_0_PIN
 #define configDBG_USART_TX_FUNCTION   AVR32_USART1_TXD_0_0_FUNCTION
 #define configDBG_USART_BAUDRATE      57600
 #define serialPORT_USART              (&AVR32_USART1)
 #define serialPORT_USART_RX_PIN       AVR32_USART1_RXD_0_0_PIN
 #define serialPORT_USART_RX_FUNCTION  AVR32_USART1_RXD_0_0_FUNCTION
 #define serialPORT_USART_TX_PIN       AVR32_USART1_TXD_0_0_PIN
 #define serialPORT_USART_TX_FUNCTION  AVR32_USART1_TXD_0_0_FUNCTION
 #define serialPORT_USART_IRQ          AVR32_USART1_IRQ
 #define serialPORT_USART_BAUDRATE     57600
 #endif


 #endif /* FREERTOS_CONFIG_H */
	/This file is prepared for Doxygen automatic documentation generation./
	/! \file ********************************************************************
	*
	* \brief FreeRTOS demonstration for AVR32 UC3.
	*
	* - Compiler: IAR EWAVR32 and GNU GCC for AVR32
	* - Supported devices: All AVR32 devices can be used.
	* - AppNote:
	*
	* \author Atmel Corporation: http://www.atmel.com \n
	* Support and FAQ: http://support.atmel.no/
	*
	******************************************************************************/

	/* Copyright (c) 2007, Atmel Corporation All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. The name of ATMEL may not be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
	* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
	* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
	* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
	* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/


	#ifndef FREERTOS_CONFIG_H
	#define FREERTOS_CONFIG_H

	#include "board.h"


	/*-----------------------------------------------------------
	* Application specific definitions.
	*
	* These definitions should be adjusted for your particular hardware and
	* application requirements.
	*
	* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
	* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
	*
	* See http://www.freertos.org/a00110.html.
	----------------------------------------------------------/

	#define configUSE_PREEMPTION 1
	#define configUSE_IDLE_HOOK 0
	#define configUSE_TICK_HOOK 0
	#define configCPU_CLOCK_HZ ( FOSC0 ) /* Hz clk gen */
	#define configPBA_CLOCK_HZ ( FOSC0 )
	#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
	#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 8 )
	#define configMINIMAL_STACK_SIZE ( ( unsigned portSHORT ) 128 )
	/* configTOTAL_HEAP_SIZE is not used when heap_3.c is used. */
	#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 1024*25 ) )
	#define configMAX_TASK_NAME_LEN ( 16 )
	#define configUSE_TRACE_FACILITY 0
	#define configUSE_16_BIT_TICKS 0
	#define configIDLE_SHOULD_YIELD 1

	/* Co-routine definitions. */
	#define configUSE_CO_ROUTINES 0
	#define configMAX_CO_ROUTINE_PRIORITIES ( 0 )

	/* Set the following definitions to 1 to include the API function, or zero
	to exclude the API function. */

	#define INCLUDE_vTaskPrioritySet 1
	#define INCLUDE_uxTaskPriorityGet 1
	#define INCLUDE_vTaskDelete 1
	#define INCLUDE_vTaskCleanUpResources 0
	#define INCLUDE_vTaskSuspend 1
	#define INCLUDE_vTaskDelayUntil 1
	#define INCLUDE_vTaskDelay 1
	#define INCLUDE_xTaskGetCurrentTaskHandle 0
	#define INCLUDE_xTaskGetSchedulerState 1

	/* configTICK_USE_TC is a boolean indicating whether to use a Timer Counter
	for the tick generation. Timer Counter will generate an accurate Tick;
	otherwise the CPU will generate a tick but with time drift.
	configTICK_TC_CHANNEL is the TC channel. */
	#define configTICK_USE_TC 1
	#define configTICK_TC_CHANNEL 2

	/* configHEAP_INIT is a boolean indicating whether to initialize the heap with
	0xA5 in order to be able to determine the maximal heap consumption. */
	#define configHEAP_INIT 0

	/* Debug trace configuration.
	configDBG is a boolean indicating whether to activate the debug trace. */
	#if BOARD == EVK1100
	#define configDBG 1
	#define configDBG_USART (&AVR32_USART1)
	#define configDBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN
	#define configDBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION
	#define configDBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN
	#define configDBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION
	#define configDBG_USART_BAUDRATE 57600
	#define serialPORT_USART (&AVR32_USART0)
	#define serialPORT_USART_RX_PIN AVR32_USART0_RXD_0_PIN
	#define serialPORT_USART_RX_FUNCTION AVR32_USART0_RXD_0_FUNCTION
	#define serialPORT_USART_TX_PIN AVR32_USART0_TXD_0_PIN
	#define serialPORT_USART_TX_FUNCTION AVR32_USART0_TXD_0_FUNCTION
	#define serialPORT_USART_IRQ AVR32_USART0_IRQ
	#define serialPORT_USART_BAUDRATE 57600
	#elif BOARD == EVK1101
	#define configDBG 1
	#define configDBG_USART (&AVR32_USART1)
	#define configDBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN
	#define configDBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION
	#define configDBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN
	#define configDBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION
	#define configDBG_USART_BAUDRATE 57600
	#define serialPORT_USART (&AVR32_USART1)
	#define serialPORT_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN
	#define serialPORT_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION
	#define serialPORT_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN
	#define serialPORT_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION
	#define serialPORT_USART_IRQ AVR32_USART1_IRQ
	#define serialPORT_USART_BAUDRATE 57600
	#endif


	#endif /* FREERTOS_CONFIG_H */