Demo/AVR32_UC3/FreeRTOSConfig.h

/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
 *
 * \brief FreeRTOS demonstration for AVR32 UC3.
 *
 * - Compiler:           IAR EWAVR32 and GNU GCC for AVR32
 * - Supported devices:  All AVR32 devices can be used.
 * - AppNote:
 *
 * \author               Atmel Corporation: http://www.atmel.com \n
 *                       Support and FAQ: http://support.atmel.no/
 *
 ******************************************************************************/

/* Copyright (c) 2007, Atmel Corporation All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * 3. The name of ATMEL may not be used to endorse or promote products derived
 * from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
 * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */


#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H

#include "board.h"


/*-----------------------------------------------------------
 * Application specific definitions.
 *
 * These definitions should be adjusted for your particular hardware and
 * application requirements.
 *
 * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
 * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. 
 *
 * See http://www.freertos.org/a00110.html.
 *----------------------------------------------------------*/

#define configUSE_PREEMPTION      1
#define configUSE_IDLE_HOOK       0
#define configUSE_TICK_HOOK       0
#define configCPU_CLOCK_HZ        ( FOSC0 ) /* Hz clk gen */
#define configPBA_CLOCK_HZ        ( FOSC0 )
#define configTICK_RATE_HZ        ( ( portTickType ) 1000 )
#define configMAX_PRIORITIES      ( ( unsigned portBASE_TYPE ) 8 )
#define configMINIMAL_STACK_SIZE  ( ( unsigned short ) 128 )
/* configTOTAL_HEAP_SIZE is not used when heap_3.c is used. */
#define configTOTAL_HEAP_SIZE     ( ( size_t ) ( 1024*25 ) )
#define configMAX_TASK_NAME_LEN   ( 16 )
#define configUSE_TRACE_FACILITY  0
#define configUSE_16_BIT_TICKS    0
#define configIDLE_SHOULD_YIELD   1

/* Co-routine definitions. */
#define configUSE_CO_ROUTINES     0
#define configMAX_CO_ROUTINE_PRIORITIES ( 0 )

/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */

#define INCLUDE_vTaskPrioritySet            1
#define INCLUDE_uxTaskPriorityGet           1
#define INCLUDE_vTaskDelete                 1
#define INCLUDE_vTaskCleanUpResources       0
#define INCLUDE_vTaskSuspend                1
#define INCLUDE_vTaskDelayUntil             1
#define INCLUDE_vTaskDelay                  1
#define INCLUDE_xTaskGetCurrentTaskHandle   0
#define INCLUDE_xTaskGetSchedulerState		1

/* configTICK_USE_TC is a boolean indicating whether to use a Timer Counter
   for the tick generation. Timer Counter will generate an accurate Tick;
   otherwise the CPU will generate a tick but with time drift.
   configTICK_TC_CHANNEL is the TC channel. */
#define configTICK_USE_TC             1
#define configTICK_TC_CHANNEL         2

/* configHEAP_INIT is a boolean indicating whether to initialize the heap with
   0xA5 in order to be able to determine the maximal heap consumption. */
#define configHEAP_INIT               0

/* Debug trace configuration.
   configDBG is a boolean indicating whether to activate the debug trace. */
#if BOARD == EVK1100
#define configDBG                     1
#define configDBG_USART               (&AVR32_USART1)
#define configDBG_USART_RX_PIN        AVR32_USART1_RXD_0_PIN
#define configDBG_USART_RX_FUNCTION   AVR32_USART1_RXD_0_FUNCTION
#define configDBG_USART_TX_PIN        AVR32_USART1_TXD_0_PIN
#define configDBG_USART_TX_FUNCTION   AVR32_USART1_TXD_0_FUNCTION
#define configDBG_USART_BAUDRATE      57600
#define serialPORT_USART              (&AVR32_USART0)
#define serialPORT_USART_RX_PIN       AVR32_USART0_RXD_0_PIN
#define serialPORT_USART_RX_FUNCTION  AVR32_USART0_RXD_0_FUNCTION
#define serialPORT_USART_TX_PIN       AVR32_USART0_TXD_0_PIN
#define serialPORT_USART_TX_FUNCTION  AVR32_USART0_TXD_0_FUNCTION
#define serialPORT_USART_IRQ          AVR32_USART0_IRQ
#define serialPORT_USART_BAUDRATE     57600
#elif BOARD == EVK1101
#define configDBG                     1
#define configDBG_USART               (&AVR32_USART1)
#define configDBG_USART_RX_PIN        AVR32_USART1_RXD_0_0_PIN
#define configDBG_USART_RX_FUNCTION   AVR32_USART1_RXD_0_0_FUNCTION
#define configDBG_USART_TX_PIN        AVR32_USART1_TXD_0_0_PIN
#define configDBG_USART_TX_FUNCTION   AVR32_USART1_TXD_0_0_FUNCTION
#define configDBG_USART_BAUDRATE      57600
#define serialPORT_USART              (&AVR32_USART1)
#define serialPORT_USART_RX_PIN       AVR32_USART1_RXD_0_0_PIN
#define serialPORT_USART_RX_FUNCTION  AVR32_USART1_RXD_0_0_FUNCTION
#define serialPORT_USART_TX_PIN       AVR32_USART1_TXD_0_0_PIN
#define serialPORT_USART_TX_FUNCTION  AVR32_USART1_TXD_0_0_FUNCTION
#define serialPORT_USART_IRQ          AVR32_USART1_IRQ
#define serialPORT_USART_BAUDRATE     57600
#endif


#endif /* FREERTOS_CONFIG_H */