Demo/HCS12_GCC_banked/startup.c

/*
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.

    ***************************************************************************
    *                                                                         *
    * If you are:                                                             *
    *                                                                         *
    *    + New to FreeRTOS,                                                   *
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
    *    + Looking for basic training,                                        *
    *    + Wanting to improve your FreeRTOS skills and productivity           *
    *                                                                         *
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
    *                                                                         *
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
    *                  http://www.FreeRTOS.org/Documentation                  *
    *                                                                         *
    * A pdf reference manual is also available.  Both are usually delivered   *
    * to your inbox within 20 minutes to two hours when purchased between 8am *
    * and 8pm GMT (although please allow up to 24 hours in case of            *
    * exceptional circumstances).  Thank you for your support!                *
    *                                                                         *
    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
    ***NOTE*** The exception to the GPL is included to allow you to distribute
    a combined work that includes FreeRTOS without being obliged to provide the
    source code for proprietary components outside of the FreeRTOS kernel.
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
    more details. You should have received a copy of the GNU General Public 
    License and the FreeRTOS license exception along with FreeRTOS; if not it 
    can be viewed here: http://www.freertos.org/a00114.html and also obtained 
    by writing to Richard Barry, contact details for whom are available on the
    FreeRTOS WEB site.

    1 tab == 4 spaces!

    http://www.FreeRTOS.org - Documentation, latest information, license and
    contact details.

    http://www.SafeRTOS.com - A version that is certified for use in safety
    critical systems.

    http://www.OpenRTOS.com - Commercial support, development, porting,
    licensing and training services.
*/


/*
 * startup.c
 * Author Jefferson L Smith, Robotronics Inc.
 *
 * __premain() is the startup code to init hardware and ram to execute the
 *             C application.
 *
 */

#include <sys/ports.h>
#include "cpu.h"

void ATTR_NEAR __premain (void);

void
__premain (void)
{
	// in case special mode enabled, avoid conflict on PORTE
	PEAR |= NECLK;
	// bgnd mode stops COP and RTI clocks
	COPCTL = RSBCK;
	// stops TCNT counter when debugging stops
	TSCR1 |= (1<<5);			// TFRZ
	
	// PLL
	CLKSEL = 0;				// disable PLL to configure
	// xtal 16MHz, bus 24MHz
	SYNR  = 3 - 1;
	REFDV = 2 - 1;
	while (!(CRGFLG & 0x08))    // wait for PLL LOCK
	cop_optional_reset();
	CLKSEL |= 0x80;             // use PLL

	// init switch inputs
	PERH = 0xff;				// pullups

	// outputs
#if PORT_LED==M6811_PORTB		//PORTB
	DDRB = 0xff;	// init LED
#elif PORT_LED==M6811_PORTA		//PORTA
	DDRA = 0xff;
#elif PORT_LED==M6811_PTT	//PTT
	DDRT = 0xff;
#elif PORT_LED==M6811_PTM	//PTM
	DDRM = 0xff;
#elif PORT_LED==M6811_PTP	//PTP
	DDRP = 0xff;
#elif PORT_LED==M6811_PTH	//PTH
	DDRH = 0xff;
#endif
	
}