/* | |
* FreeRTOS Kernel V10.3.0 | |
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
* | |
* Permission is hereby granted, free of charge, to any person obtaining a copy of | |
* this software and associated documentation files (the "Software"), to deal in | |
* the Software without restriction, including without limitation the rights to | |
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
* the Software, and to permit persons to whom the Software is furnished to do so, | |
* subject to the following conditions: | |
* | |
* The above copyright notice and this permission notice shall be included in all | |
* copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
* | |
* http://www.FreeRTOS.org | |
* http://aws.amazon.com/freertos | |
* | |
* 1 tab == 4 spaces! | |
*/ | |
#ifndef FREERTOS_CONFIG_H | |
#define FREERTOS_CONFIG_H | |
#include "LPC17xx.h" | |
/*----------------------------------------------------------- | |
* Application specific definitions. | |
* | |
* These definitions should be adjusted for your particular hardware and | |
* application requirements. | |
* | |
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE | |
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. | |
*----------------------------------------------------------*/ | |
#define configUSE_PREEMPTION 1 | |
#define configUSE_IDLE_HOOK 0 | |
#define configMAX_PRIORITIES ( 5 ) | |
#define configUSE_TICK_HOOK 1 | |
#define configCPU_CLOCK_HZ ( ( unsigned long ) 100000000 ) | |
#define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) | |
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 80 ) | |
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 19 * 1024 ) ) | |
#define configMAX_TASK_NAME_LEN ( 12 ) | |
#define configUSE_TRACE_FACILITY 1 | |
#define configUSE_16_BIT_TICKS 0 | |
#define configIDLE_SHOULD_YIELD 0 | |
#define configUSE_CO_ROUTINES 0 | |
#define configUSE_MUTEXES 1 | |
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) | |
#define configUSE_COUNTING_SEMAPHORES 0 | |
#define configUSE_ALTERNATIVE_API 0 | |
#define configCHECK_FOR_STACK_OVERFLOW 2 | |
#define configUSE_RECURSIVE_MUTEXES 1 | |
#define configQUEUE_REGISTRY_SIZE 10 | |
#define configGENERATE_RUN_TIME_STATS 1 | |
/* Set the following definitions to 1 to include the API function, or zero | |
to exclude the API function. */ | |
#define INCLUDE_vTaskPrioritySet 1 | |
#define INCLUDE_uxTaskPriorityGet 1 | |
#define INCLUDE_vTaskDelete 1 | |
#define INCLUDE_vTaskCleanUpResources 0 | |
#define INCLUDE_vTaskSuspend 1 | |
#define INCLUDE_vTaskDelayUntil 1 | |
#define INCLUDE_vTaskDelay 1 | |
#define INCLUDE_uxTaskGetStackHighWaterMark 1 | |
/* This demo makes use of one or more example stats formatting functions. These | |
format the raw data provided by the uxTaskGetSystemState() function in to human | |
readable ASCII form. See the notes in the implementation of vTaskList() within | |
FreeRTOS/Source/tasks.c for limitations. */ | |
#define configUSE_STATS_FORMATTING_FUNCTIONS 1 | |
/*----------------------------------------------------------- | |
* Ethernet configuration. | |
*-----------------------------------------------------------*/ | |
/* MAC address configuration. */ | |
#define configMAC_ADDR0 0x00 | |
#define configMAC_ADDR1 0x12 | |
#define configMAC_ADDR2 0x13 | |
#define configMAC_ADDR3 0x10 | |
#define configMAC_ADDR4 0x15 | |
#define configMAC_ADDR5 0x11 | |
/* IP address configuration. */ | |
#define configIP_ADDR0 192 | |
#define configIP_ADDR1 168 | |
#define configIP_ADDR2 0 | |
#define configIP_ADDR3 201 | |
/* Netmask configuration. */ | |
#define configNET_MASK0 255 | |
#define configNET_MASK1 255 | |
#define configNET_MASK2 255 | |
#define configNET_MASK3 0 | |
/* Use the system definition, if there is one */ | |
#ifdef __NVIC_PRIO_BITS | |
#define configPRIO_BITS __NVIC_PRIO_BITS | |
#else | |
#define configPRIO_BITS 5 /* 32 priority levels */ | |
#endif | |
/* The lowest priority. */ | |
#define configKERNEL_INTERRUPT_PRIORITY ( 31 << (8 - configPRIO_BITS) ) | |
/* Priority 5, or 160 as only the top three bits are implemented. */ | |
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!! | |
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */ | |
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << (8 - configPRIO_BITS) ) | |
/* Priorities passed to NVIC_SetPriority() do not require shifting as the | |
function does the shifting itself. Note these priorities need to be equal to | |
or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric | |
value needs to be equal to or greater than 5 (on the Cortex-M3 the lower the | |
numeric value the higher the interrupt priority). */ | |
#define configEMAC_INTERRUPT_PRIORITY 5 | |
#define configUSB_INTERRUPT_PRIORITY 6 | |
/*----------------------------------------------------------- | |
* Macros required to setup the timer for the run time stats. | |
*-----------------------------------------------------------*/ | |
extern void vConfigureTimerForRunTimeStats( void ); | |
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats() | |
#define portGET_RUN_TIME_COUNTER_VALUE() TIM0->TC | |
/* The structure that is passed on the xLCDQueue. Put here for convenience. */ | |
typedef struct | |
{ | |
char *pcMessage; | |
} xLCDMessage; | |
#endif /* FREERTOS_CONFIG_H */ |