| /******************************************************************************* | |
| * DISCLAIMER | |
| * This software is supplied by Renesas Electronics Corporation and is only | |
| * intended for use with Renesas products. No other uses are authorized. This | |
| * software is owned by Renesas Electronics Corporation and is protected under | |
| * all applicable laws, including copyright laws. | |
| * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING | |
| * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT | |
| * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE | |
| * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. | |
| * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS | |
| * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR | |
| * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE | |
| * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. | |
| * Renesas reserves the right, without notice, to make changes to this software | |
| * and to discontinue the availability of this software. By using this software, | |
| * you agree to the additional terms and conditions found by accessing the | |
| * following link: | |
| * http://www.renesas.com/disclaimer | |
| *******************************************************************************/ | |
| /******************************************************************************* | |
| * Copyright (C) 2012 Renesas Electronics Corporation. All rights reserved. */ | |
| /******************************************************************************* | |
| * File Name : rskrx64mdef.h | |
| * Version : 1.00 | |
| * Device : R5F564ML | |
| * Tool-Chain : Renesas RX Standard 2.01.0 | |
| * H/W Platform : RSK+RX64M | |
| * Description : Defines macros relating to the RX64M user LEDs and switches | |
| *******************************************************************************/ | |
| /******************************************************************************* | |
| * History : 20 Mar. 2014 Ver. 0.00 Alpha Release | |
| *******************************************************************************/ | |
| /******************************************************************************* | |
| * Macro Definitions | |
| *******************************************************************************/ | |
| /* Multiple inclusion prevention macro */ | |
| #ifndef RSKRX64MDEF_H | |
| #define RSKRX64MDEF_H | |
| /******************************************************************************* | |
| * User Includes (Project Level Includes) | |
| *******************************************************************************/ | |
| /* Defines RX64M port registers */ | |
| #include "r_cg_macrodriver.h" | |
| /* General Values */ | |
| #define LED_ON (0) | |
| #define LED_OFF (1) | |
| #define SET_BIT_HIGH (1) | |
| #define SET_BIT_LOW (0) | |
| #define SET_BYTE_HIGH (0xFF) | |
| #define SET_BYTE_LOW (0x00) | |
| #define OUTPUT_PIN (1) | |
| #define INPUT_PIN (0) | |
| /* Switch port pins data direction */ | |
| #define SW1_PIN_DIR (PORT1.PDR.BIT.B5) | |
| #define SW2_PIN_DIR (PORT1.PDR.BIT.B2) | |
| #define SW3_PIN_DIR (PORT0.PDR.BIT.B7) | |
| /* Switches */ | |
| #define SW1 (PORT1.PIDR.BIT.B5) | |
| #define SW2 (PORT1.PIDR.BIT.B2) | |
| #define SW3 (PORT0.PIDR.BIT.B7) | |
| /* LED data direction */ | |
| #define LED0_PIN_DIR (PORT0.PDR.BIT.B3) | |
| #define LED1_PIN_DIR (PORT0.PDR.BIT.B5) | |
| #define LED2_PIN_DIR (PORT2.PDR.BIT.B6) | |
| #define LED3_PIN_DIR (PORT2.PDR.BIT.B7) | |
| /* LED ouptut pin settings */ | |
| #define LED0 (PORT0.PODR.BIT.B3) | |
| #define LED1 (PORT0.PODR.BIT.B5) | |
| #define LED2 (PORT2.PODR.BIT.B6) | |
| #define LED3 (PORT2.PODR.BIT.B7) | |
| /* End of multiple inclusion prevention macro */ | |
| #endif |