blob: 108eb52dcc80efd90ce0925cf5d2d0d10161b4ed [file] [log] [blame]
/*
* FreeRTOS Kernel V10.3.0
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
* all the API functions to use the MPU wrappers. That should only be done when
* task.h is included from an application file. */
#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* MPU wrappers includes. */
#include "mpu_wrappers.h"
/* Portasm includes. */
#include "portasm.h"
#if( configENABLE_TRUSTZONE == 1 )
/* Secure components includes. */
#include "secure_context.h"
#include "secure_init.h"
#endif /* configENABLE_TRUSTZONE */
#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
/**
* The FreeRTOS Cortex M33 port can be configured to run on the Secure Side only
* i.e. the processor boots as secure and never jumps to the non-secure side.
* The Trust Zone support in the port must be disabled in order to run FreeRTOS
* on the secure side. The following are the valid configuration seetings:
*
* 1. Run FreeRTOS on the Secure Side:
* configRUN_FREERTOS_SECURE_ONLY = 1 and configENABLE_TRUSTZONE = 0
*
* 2. Run FreeRTOS on the Non-Secure Side with Secure Side function call support:
* configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 1
*
* 3. Run FreeRTOS on the Non-Secure Side only i.e. no Secure Side function call support:
* configRUN_FREERTOS_SECURE_ONLY = 0 and configENABLE_TRUSTZONE = 0
*/
#if( ( configRUN_FREERTOS_SECURE_ONLY == 1 ) && ( configENABLE_TRUSTZONE == 1 ) )
#error TrustZone needs to be disabled in order to run FreeRTOS on the Secure Side.
#endif
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the NVIC.
*/
#define portNVIC_SYSTICK_CTRL ( ( volatile uint32_t * ) 0xe000e010 )
#define portNVIC_SYSTICK_LOAD ( ( volatile uint32_t * ) 0xe000e014 )
#define portNVIC_SYSTICK_CURRENT_VALUE ( ( volatile uint32_t * ) 0xe000e018 )
#define portNVIC_INT_CTRL ( ( volatile uint32_t * ) 0xe000ed04 )
#define portNVIC_SYSPRI2 ( ( volatile uint32_t * ) 0xe000ed20 )
#define portNVIC_SYSTICK_CLK ( 0x00000004 )
#define portNVIC_SYSTICK_INT ( 0x00000002 )
#define portNVIC_SYSTICK_ENABLE ( 0x00000001 )
#define portNVIC_PENDSVSET ( 0x10000000 )
#define portMIN_INTERRUPT_PRIORITY ( 255UL )
#define portNVIC_PENDSV_PRI ( portMIN_INTERRUPT_PRIORITY << 16UL )
#define portNVIC_SYSTICK_PRI ( portMIN_INTERRUPT_PRIORITY << 24UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the SCB.
*/
#define portSCB_SYS_HANDLER_CTRL_STATE_REG ( * ( volatile uint32_t * ) 0xe000ed24 )
#define portSCB_MEM_FAULT_ENABLE ( 1UL << 16UL )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the FPU.
*/
#define portCPACR ( ( volatile uint32_t * ) 0xe000ed88 ) /* Coprocessor Access Control Register. */
#define portCPACR_CP10_VALUE ( 3UL )
#define portCPACR_CP11_VALUE portCPACR_CP10_VALUE
#define portCPACR_CP10_POS ( 20UL )
#define portCPACR_CP11_POS ( 22UL )
#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating Point Context Control Register. */
#define portFPCCR_ASPEN_POS ( 31UL )
#define portFPCCR_ASPEN_MASK ( 1UL << portFPCCR_ASPEN_POS )
#define portFPCCR_LSPEN_POS ( 30UL )
#define portFPCCR_LSPEN_MASK ( 1UL << portFPCCR_LSPEN_POS )
/*-----------------------------------------------------------*/
/**
* @brief Constants required to manipulate the MPU.
*/
#define portMPU_TYPE_REG ( * ( ( volatile uint32_t * ) 0xe000ed90 ) )
#define portMPU_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed94 ) )
#define portMPU_RNR_REG ( * ( ( volatile uint32_t * ) 0xe000ed98 ) )
#define portMPU_RBAR_REG ( * ( ( volatile uint32_t * ) 0xe000ed9c ) )
#define portMPU_RLAR_REG ( * ( ( volatile uint32_t * ) 0xe000eda0 ) )
#define portMPU_RBAR_A1_REG ( * ( ( volatile uint32_t * ) 0xe000eda4 ) )
#define portMPU_RLAR_A1_REG ( * ( ( volatile uint32_t * ) 0xe000eda8 ) )
#define portMPU_RBAR_A2_REG ( * ( ( volatile uint32_t * ) 0xe000edac ) )
#define portMPU_RLAR_A2_REG ( * ( ( volatile uint32_t * ) 0xe000edb0 ) )
#define portMPU_RBAR_A3_REG ( * ( ( volatile uint32_t * ) 0xe000edb4 ) )
#define portMPU_RLAR_A3_REG ( * ( ( volatile uint32_t * ) 0xe000edb8 ) )
#define portMPU_MAIR0_REG ( * ( ( volatile uint32_t * ) 0xe000edc0 ) )
#define portMPU_MAIR1_REG ( * ( ( volatile uint32_t * ) 0xe000edc4 ) )
#define portMPU_RBAR_ADDRESS_MASK ( 0xffffffe0 ) /* Must be 32-byte aligned. */
#define portMPU_RLAR_ADDRESS_MASK ( 0xffffffe0 ) /* Must be 32-byte aligned. */
#define portMPU_MAIR_ATTR0_POS ( 0UL )
#define portMPU_MAIR_ATTR0_MASK ( 0x000000ff )
#define portMPU_MAIR_ATTR1_POS ( 8UL )
#define portMPU_MAIR_ATTR1_MASK ( 0x0000ff00 )
#define portMPU_MAIR_ATTR2_POS ( 16UL )
#define portMPU_MAIR_ATTR2_MASK ( 0x00ff0000 )
#define portMPU_MAIR_ATTR3_POS ( 24UL )
#define portMPU_MAIR_ATTR3_MASK ( 0xff000000 )
#define portMPU_MAIR_ATTR4_POS ( 0UL )
#define portMPU_MAIR_ATTR4_MASK ( 0x000000ff )
#define portMPU_MAIR_ATTR5_POS ( 8UL )
#define portMPU_MAIR_ATTR5_MASK ( 0x0000ff00 )
#define portMPU_MAIR_ATTR6_POS ( 16UL )
#define portMPU_MAIR_ATTR6_MASK ( 0x00ff0000 )
#define portMPU_MAIR_ATTR7_POS ( 24UL )
#define portMPU_MAIR_ATTR7_MASK ( 0xff000000 )
#define portMPU_RLAR_ATTR_INDEX0 ( 0UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX1 ( 1UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX2 ( 2UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX3 ( 3UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX4 ( 4UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX5 ( 5UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX6 ( 6UL << 1UL )
#define portMPU_RLAR_ATTR_INDEX7 ( 7UL << 1UL )
#define portMPU_RLAR_REGION_ENABLE ( 1UL )
/* Enable privileged access to unmapped region. */
#define portMPU_PRIV_BACKGROUND_ENABLE ( 1UL << 2UL )
/* Enable MPU. */
#define portMPU_ENABLE ( 1UL << 0UL )
/* Expected value of the portMPU_TYPE register. */
#define portEXPECTED_MPU_TYPE_VALUE ( 8UL << 8UL ) /* 8 regions, unified. */
/*-----------------------------------------------------------*/
/**
* @brief Constants required to set up the initial stack.
*/
#define portINITIAL_XPSR ( 0x01000000 )
#if( configRUN_FREERTOS_SECURE_ONLY == 1 )
/**
* @brief Initial EXC_RETURN value.
*
* FF FF FF FD
* 1111 1111 1111 1111 1111 1111 1111 1101
*
* Bit[6] - 1 --> The exception was taken from the Secure state.
* Bit[5] - 1 --> Do not skip stacking of additional state context.
* Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
* Bit[3] - 1 --> Return to the Thread mode.
* Bit[2] - 1 --> Restore registers from the process stack.
* Bit[1] - 0 --> Reserved, 0.
* Bit[0] - 1 --> The exception was taken to the Secure state.
*/
#define portINITIAL_EXC_RETURN ( 0xfffffffd )
#else
/**
* @brief Initial EXC_RETURN value.
*
* FF FF FF BC
* 1111 1111 1111 1111 1111 1111 1011 1100
*
* Bit[6] - 0 --> The exception was taken from the Non-Secure state.
* Bit[5] - 1 --> Do not skip stacking of additional state context.
* Bit[4] - 1 --> The PE did not allocate space on the stack for FP context.
* Bit[3] - 1 --> Return to the Thread mode.
* Bit[2] - 1 --> Restore registers from the process stack.
* Bit[1] - 0 --> Reserved, 0.
* Bit[0] - 0 --> The exception was taken to the Non-Secure state.
*/
#define portINITIAL_EXC_RETURN ( 0xffffffbc )
#endif /* configRUN_FREERTOS_SECURE_ONLY */
/**
* @brief CONTROL register privileged bit mask.
*
* Bit[0] in CONTROL register tells the privilege:
* Bit[0] = 0 ==> The task is privileged.
* Bit[0] = 1 ==> The task is not privileged.
*/
#define portCONTROL_PRIVILEGED_MASK ( 1UL << 0UL )
/**
* @brief Initial CONTROL register values.
*/
#define portINITIAL_CONTROL_UNPRIVILEGED ( 0x3 )
#define portINITIAL_CONTROL_PRIVILEGED ( 0x2 )
/**
* @brief Let the user override the pre-loading of the initial LR with the
* address of prvTaskExitError() in case it messes up unwinding of the stack
* in the debugger.
*/
#ifdef configTASK_RETURN_ADDRESS
#define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS
#else
#define portTASK_RETURN_ADDRESS prvTaskExitError
#endif
/**
* @brief If portPRELOAD_REGISTERS then registers will be given an initial value
* when a task is created. This helps in debugging at the cost of code size.
*/
#define portPRELOAD_REGISTERS 1
/**
* @brief A task is created without a secure context, and must call
* portALLOCATE_SECURE_CONTEXT() to give itself a secure context before it makes
* any secure calls.
*/
#define portNO_SECURE_CONTEXT 0
/*-----------------------------------------------------------*/
/**
* @brief Used to catch tasks that attempt to return from their implementing
* function.
*/
static void prvTaskExitError( void );
#if( configENABLE_MPU == 1 )
/**
* @brief Setup the Memory Protection Unit (MPU).
*/
static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
#endif /* configENABLE_MPU */
#if( configENABLE_FPU == 1 )
/**
* @brief Setup the Floating Point Unit (FPU).
*/
static void prvSetupFPU( void ) PRIVILEGED_FUNCTION;
#endif /* configENABLE_FPU */
/**
* @brief Setup the timer to generate the tick interrupts.
*
* The implementation in this file is weak to allow application writers to
* change the timer used to generate the tick interrupt.
*/
void vPortSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
/**
* @brief Checks whether the current execution context is interrupt.
*
* @return pdTRUE if the current execution context is interrupt, pdFALSE
* otherwise.
*/
BaseType_t xPortIsInsideInterrupt( void );
/**
* @brief Yield the processor.
*/
void vPortYield( void ) PRIVILEGED_FUNCTION;
/**
* @brief Enter critical section.
*/
void vPortEnterCritical( void ) PRIVILEGED_FUNCTION;
/**
* @brief Exit from critical section.
*/
void vPortExitCritical( void ) PRIVILEGED_FUNCTION;
/**
* @brief SysTick handler.
*/
void SysTick_Handler( void ) PRIVILEGED_FUNCTION;
/**
* @brief C part of SVC handler.
*/
portDONT_DISCARD void vPortSVCHandler_C( uint32_t *pulCallerStackAddress ) PRIVILEGED_FUNCTION;
/*-----------------------------------------------------------*/
/**
* @brief Each task maintains its own interrupt status in the critical nesting
* variable.
*/
static volatile uint32_t ulCriticalNesting = 0xaaaaaaaaUL;
#if( configENABLE_TRUSTZONE == 1 )
/**
* @brief Saved as part of the task context to indicate which context the
* task is using on the secure side.
*/
portDONT_DISCARD volatile SecureContextHandle_t xSecureContext = portNO_SECURE_CONTEXT;
#endif /* configENABLE_TRUSTZONE */
/*-----------------------------------------------------------*/
__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) /* PRIVILEGED_FUNCTION */
{
/* Stop and reset the SysTick. */
*( portNVIC_SYSTICK_CTRL ) = 0UL;
*( portNVIC_SYSTICK_CURRENT_VALUE ) = 0UL;
/* Configure SysTick to interrupt at the requested rate. */
*( portNVIC_SYSTICK_LOAD ) = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
*( portNVIC_SYSTICK_CTRL ) = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;
}
/*-----------------------------------------------------------*/
static void prvTaskExitError( void )
{
volatile uint32_t ulDummy = 0UL;
/* A function that implements a task must not exit or attempt to return to
* its caller as there is nothing to return to. If a task wants to exit it
* should instead call vTaskDelete( NULL ). Artificially force an assert()
* to be triggered if configASSERT() is defined, then stop here so
* application writers can catch the error. */
configASSERT( ulCriticalNesting == ~0UL );
portDISABLE_INTERRUPTS();
while( ulDummy == 0 )
{
/* This file calls prvTaskExitError() after the scheduler has been
* started to remove a compiler warning about the function being
* defined but never called. ulDummy is used purely to quieten other
* warnings about code appearing after this function is called - making
* ulDummy volatile makes the compiler think the function could return
* and therefore not output an 'unreachable code' warning for code that
* appears after it. */
}
}
/*-----------------------------------------------------------*/
#if( configENABLE_MPU == 1 )
static void prvSetupMPU( void ) /* PRIVILEGED_FUNCTION */
{
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __privileged_functions_start__;
extern uint32_t * __privileged_functions_end__;
extern uint32_t * __syscalls_flash_start__;
extern uint32_t * __syscalls_flash_end__;
extern uint32_t * __unprivileged_flash_start__;
extern uint32_t * __unprivileged_flash_end__;
extern uint32_t * __privileged_sram_start__;
extern uint32_t * __privileged_sram_end__;
#else
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __privileged_functions_start__[];
extern uint32_t __privileged_functions_end__[];
extern uint32_t __syscalls_flash_start__[];
extern uint32_t __syscalls_flash_end__[];
extern uint32_t __unprivileged_flash_start__[];
extern uint32_t __unprivileged_flash_end__[];
extern uint32_t __privileged_sram_start__[];
extern uint32_t __privileged_sram_end__[];
#endif /* defined( __ARMCC_VERSION ) */
/* Check that the MPU is present. */
if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
{
/* MAIR0 - Index 0. */
portMPU_MAIR0_REG |= ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
/* MAIR0 - Index 1. */
portMPU_MAIR0_REG |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
/* Setup privileged flash as Read Only so that privileged tasks can
* read it but not modify. */
portMPU_RNR_REG = portPRIVILEGED_FLASH_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_functions_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_PRIVILEGED_READ_ONLY );
portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_functions_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Setup unprivileged flash as Read Only by both privileged and
* unprivileged tasks. All tasks can read it but no-one can modify. */
portMPU_RNR_REG = portUNPRIVILEGED_FLASH_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __unprivileged_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_READ_ONLY );
portMPU_RLAR_REG = ( ( ( uint32_t ) __unprivileged_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Setup unprivileged syscalls flash as Read Only by both privileged
* and unprivileged tasks. All tasks can read it but no-one can modify. */
portMPU_RNR_REG = portUNPRIVILEGED_SYSCALLS_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __syscalls_flash_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_READ_ONLY );
portMPU_RLAR_REG = ( ( ( uint32_t ) __syscalls_flash_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Setup RAM containing kernel data for privileged access only. */
portMPU_RNR_REG = portPRIVILEGED_RAM_REGION;
portMPU_RBAR_REG = ( ( ( uint32_t ) __privileged_sram_start__ ) & portMPU_RBAR_ADDRESS_MASK ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
( portMPU_REGION_EXECUTE_NEVER );
portMPU_RLAR_REG = ( ( ( uint32_t ) __privileged_sram_end__ ) & portMPU_RLAR_ADDRESS_MASK ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
/* Enable mem fault. */
portSCB_SYS_HANDLER_CTRL_STATE_REG |= portSCB_MEM_FAULT_ENABLE;
/* Enable MPU with privileged background access i.e. unmapped
* regions have privileged access. */
portMPU_CTRL_REG |= ( portMPU_PRIV_BACKGROUND_ENABLE | portMPU_ENABLE );
}
}
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
#if( configENABLE_FPU == 1 )
static void prvSetupFPU( void ) /* PRIVILEGED_FUNCTION */
{
#if( configENABLE_TRUSTZONE == 1 )
{
/* Enable non-secure access to the FPU. */
SecureInit_EnableNSFPUAccess();
}
#endif /* configENABLE_TRUSTZONE */
/* CP10 = 11 ==> Full access to FPU i.e. both privileged and
* unprivileged code should be able to access FPU. CP11 should be
* programmed to the same value as CP10. */
*( portCPACR ) |= ( ( portCPACR_CP10_VALUE << portCPACR_CP10_POS ) |
( portCPACR_CP11_VALUE << portCPACR_CP11_POS )
);
/* ASPEN = 1 ==> Hardware should automatically preserve floating point
* context on exception entry and restore on exception return.
* LSPEN = 1 ==> Enable lazy context save of FP state. */
*( portFPCCR ) |= ( portFPCCR_ASPEN_MASK | portFPCCR_LSPEN_MASK );
}
#endif /* configENABLE_FPU */
/*-----------------------------------------------------------*/
void vPortYield( void ) /* PRIVILEGED_FUNCTION */
{
/* Set a PendSV to request a context switch. */
*( portNVIC_INT_CTRL ) = portNVIC_PENDSVSET;
/* Barriers are normally not required but do ensure the code is
* completely within the specified behaviour for the architecture. */
__asm volatile( "dsb" ::: "memory" );
__asm volatile( "isb" );
}
/*-----------------------------------------------------------*/
void vPortEnterCritical( void ) /* PRIVILEGED_FUNCTION */
{
portDISABLE_INTERRUPTS();
ulCriticalNesting++;
/* Barriers are normally not required but do ensure the code is
* completely within the specified behaviour for the architecture. */
__asm volatile( "dsb" ::: "memory" );
__asm volatile( "isb" );
}
/*-----------------------------------------------------------*/
void vPortExitCritical( void ) /* PRIVILEGED_FUNCTION */
{
configASSERT( ulCriticalNesting );
ulCriticalNesting--;
if( ulCriticalNesting == 0 )
{
portENABLE_INTERRUPTS();
}
}
/*-----------------------------------------------------------*/
void SysTick_Handler( void ) /* PRIVILEGED_FUNCTION */
{
uint32_t ulPreviousMask;
ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
{
/* Increment the RTOS tick. */
if( xTaskIncrementTick() != pdFALSE )
{
/* Pend a context switch. */
*( portNVIC_INT_CTRL ) = portNVIC_PENDSVSET;
}
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
}
/*-----------------------------------------------------------*/
void vPortSVCHandler_C( uint32_t *pulCallerStackAddress ) /* PRIVILEGED_FUNCTION portDONT_DISCARD */
{
#if( configENABLE_MPU == 1 )
#if defined( __ARMCC_VERSION )
/* Declaration when these variable are defined in code instead of being
* exported from linker scripts. */
extern uint32_t * __syscalls_flash_start__;
extern uint32_t * __syscalls_flash_end__;
#else
/* Declaration when these variable are exported from linker scripts. */
extern uint32_t __syscalls_flash_start__[];
extern uint32_t __syscalls_flash_end__[];
#endif /* defined( __ARMCC_VERSION ) */
#endif /* configENABLE_MPU */
uint32_t ulPC;
#if( configENABLE_TRUSTZONE == 1 )
uint32_t ulR0;
#if( configENABLE_MPU == 1 )
uint32_t ulControl, ulIsTaskPrivileged;
#endif /* configENABLE_MPU */
#endif /* configENABLE_TRUSTZONE */
uint8_t ucSVCNumber;
/* Register are stored on the stack in the following order - R0, R1, R2, R3,
* R12, LR, PC, xPSR. */
ulPC = pulCallerStackAddress[ 6 ];
ucSVCNumber = ( ( uint8_t *) ulPC )[ -2 ];
switch( ucSVCNumber )
{
#if( configENABLE_TRUSTZONE == 1 )
case portSVC_ALLOCATE_SECURE_CONTEXT:
{
/* R0 contains the stack size passed as parameter to the
* vPortAllocateSecureContext function. */
ulR0 = pulCallerStackAddress[ 0 ];
#if( configENABLE_MPU == 1 )
{
/* Read the CONTROL register value. */
__asm volatile ( "mrs %0, control" : "=r" ( ulControl ) );
/* The task that raised the SVC is privileged if Bit[0]
* in the CONTROL register is 0. */
ulIsTaskPrivileged = ( ( ulControl & portCONTROL_PRIVILEGED_MASK ) == 0 );
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0, ulIsTaskPrivileged );
}
#else
{
/* Allocate and load a context for the secure task. */
xSecureContext = SecureContext_AllocateContext( ulR0 );
}
#endif /* configENABLE_MPU */
configASSERT( xSecureContext != NULL );
SecureContext_LoadContext( xSecureContext );
}
break;
case portSVC_FREE_SECURE_CONTEXT:
{
/* R0 contains the secure context handle to be freed. */
ulR0 = pulCallerStackAddress[ 0 ];
/* Free the secure context. */
SecureContext_FreeContext( ( SecureContextHandle_t ) ulR0 );
}
break;
#endif /* configENABLE_TRUSTZONE */
case portSVC_START_SCHEDULER:
{
#if( configENABLE_TRUSTZONE == 1 )
{
/* De-prioritize the non-secure exceptions so that the
* non-secure pendSV runs at the lowest priority. */
SecureInit_DePrioritizeNSExceptions();
/* Initialize the secure context management system. */
SecureContext_Init();
}
#endif /* configENABLE_TRUSTZONE */
#if( configENABLE_FPU == 1 )
{
/* Setup the Floating Point Unit (FPU). */
prvSetupFPU();
}
#endif /* configENABLE_FPU */
/* Setup the context of the first task so that the first task starts
* executing. */
vRestoreContextOfFirstTask();
}
break;
#if( configENABLE_MPU == 1 )
case portSVC_RAISE_PRIVILEGE:
{
/* Only raise the privilege, if the svc was raised from any of
* the system calls. */
if( ulPC >= ( uint32_t ) __syscalls_flash_start__ &&
ulPC <= ( uint32_t ) __syscalls_flash_end__ )
{
vRaisePrivilege();
}
}
break;
#endif /* configENABLE_MPU */
default:
{
/* Incorrect SVC call. */
configASSERT( pdFALSE );
}
}
}
/*-----------------------------------------------------------*/
#if( configENABLE_MPU == 1 )
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) /* PRIVILEGED_FUNCTION */
#else
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, StackType_t *pxEndOfStack, TaskFunction_t pxCode, void *pvParameters ) /* PRIVILEGED_FUNCTION */
#endif /* configENABLE_MPU */
{
/* Simulate the stack frame as it would be created by a context switch
* interrupt. */
#if( portPRELOAD_REGISTERS == 0 )
{
pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
*pxTopOfStack = portINITIAL_XPSR; /* xPSR */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode; /* PC */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
pxTopOfStack -= 5; /* R12, R3, R2 and R1. */
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack -= 9; /* R11..R4, EXC_RETURN. */
*pxTopOfStack = portINITIAL_EXC_RETURN;
#if( configENABLE_MPU == 1 )
{
pxTopOfStack--;
if( xRunPrivileged == pdTRUE )
{
*pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
}
else
{
*pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
}
}
#endif /* configENABLE_MPU */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
#if( configENABLE_TRUSTZONE == 1 )
{
pxTopOfStack--;
*pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
}
#endif /* configENABLE_TRUSTZONE */
}
#else /* portPRELOAD_REGISTERS */
{
pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
*pxTopOfStack = portINITIAL_XPSR; /* xPSR */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode; /* PC */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x12121212UL; /* R12 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x03030303UL; /* R3 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x02020202UL; /* R2 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x01010101UL; /* R1 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x11111111UL; /* R11 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x10101010UL; /* R10 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x09090909UL; /* R09 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x08080808UL; /* R08 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x07070707UL; /* R07 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x06060606UL; /* R06 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x05050505UL; /* R05 */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) 0x04040404UL; /* R04 */
pxTopOfStack--;
*pxTopOfStack = portINITIAL_EXC_RETURN; /* EXC_RETURN */
#if( configENABLE_MPU == 1 )
{
pxTopOfStack--;
if( xRunPrivileged == pdTRUE )
{
*pxTopOfStack = portINITIAL_CONTROL_PRIVILEGED; /* Slot used to hold this task's CONTROL value. */
}
else
{
*pxTopOfStack = portINITIAL_CONTROL_UNPRIVILEGED; /* Slot used to hold this task's CONTROL value. */
}
}
#endif /* configENABLE_MPU */
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxEndOfStack; /* Slot used to hold this task's PSPLIM value. */
#if( configENABLE_TRUSTZONE == 1 )
{
pxTopOfStack--;
*pxTopOfStack = portNO_SECURE_CONTEXT; /* Slot used to hold this task's xSecureContext value. */
}
#endif /* configENABLE_TRUSTZONE */
}
#endif /* portPRELOAD_REGISTERS */
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void ) /* PRIVILEGED_FUNCTION */
{
/* Make PendSV, CallSV and SysTick the same priority as the kernel. */
*( portNVIC_SYSPRI2 ) |= portNVIC_PENDSV_PRI;
*( portNVIC_SYSPRI2 ) |= portNVIC_SYSTICK_PRI;
#if( configENABLE_MPU == 1 )
{
/* Setup the Memory Protection Unit (MPU). */
prvSetupMPU();
}
#endif /* configENABLE_MPU */
/* Start the timer that generates the tick ISR. Interrupts are disabled
* here already. */
vPortSetupTimerInterrupt();
/* Initialize the critical nesting count ready for the first task. */
ulCriticalNesting = 0;
/* Start the first task. */
vStartFirstTask();
/* Should never get here as the tasks will now be executing. Call the task
* exit error function to prevent compiler warnings about a static function
* not being called in the case that the application writer overrides this
* functionality by defining configTASK_RETURN_ADDRESS. Call
* vTaskSwitchContext() so link time optimization does not remove the
* symbol. */
vTaskSwitchContext();
prvTaskExitError();
/* Should not get here. */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void ) /* PRIVILEGED_FUNCTION */
{
/* Not implemented in ports where there is nothing to return to.
* Artificially force an assert. */
configASSERT( ulCriticalNesting == 1000UL );
}
/*-----------------------------------------------------------*/
#if( configENABLE_MPU == 1 )
void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth )
{
uint32_t ulRegionStartAddress, ulRegionEndAddress, ulRegionNumber;
int32_t lIndex = 0;
/* Setup MAIR0. */
xMPUSettings->ulMAIR0 = ( ( portMPU_NORMAL_MEMORY_BUFFERABLE_CACHEABLE << portMPU_MAIR_ATTR0_POS ) & portMPU_MAIR_ATTR0_MASK );
xMPUSettings->ulMAIR0 |= ( ( portMPU_DEVICE_MEMORY_nGnRE << portMPU_MAIR_ATTR1_POS ) & portMPU_MAIR_ATTR1_MASK );
/* This function is called automatically when the task is created - in
* which case the stack region parameters will be valid. At all other
* times the stack parameters will not be valid and it is assumed that
* the stack region has already been configured. */
if( ulStackDepth > 0 )
{
/* Define the region that allows access to the stack. */
ulRegionStartAddress = ( ( uint32_t ) pxBottomOfStack ) & portMPU_RBAR_ADDRESS_MASK;
ulRegionEndAddress = ( uint32_t ) pxBottomOfStack + ( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) - 1;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
xMPUSettings->xRegionsSettings[ 0 ].ulRBAR = ( ulRegionStartAddress ) |
( portMPU_REGION_NON_SHAREABLE ) |
( portMPU_REGION_READ_WRITE ) |
( portMPU_REGION_EXECUTE_NEVER );
xMPUSettings->xRegionsSettings[ 0 ].ulRLAR = ( ulRegionEndAddress ) |
( portMPU_RLAR_ATTR_INDEX0 ) |
( portMPU_RLAR_REGION_ENABLE );
}
/* User supplied configurable regions. */
for( ulRegionNumber = 1; ulRegionNumber <= portNUM_CONFIGURABLE_REGIONS; ulRegionNumber++ )
{
/* If xRegions is NULL i.e. the task has not specified any MPU
* region, the else part ensures that all the configurable MPU
* regions are invalidated. */
if( ( xRegions != NULL ) && ( xRegions[ lIndex ].ulLengthInBytes > 0UL ) )
{
/* Translate the generic region definition contained in xRegions
* into the ARMv8 specific MPU settings that are then stored in
* xMPUSettings. */
ulRegionStartAddress = ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) & portMPU_RBAR_ADDRESS_MASK;
ulRegionEndAddress = ( uint32_t ) xRegions[ lIndex ].pvBaseAddress + xRegions[ lIndex ].ulLengthInBytes - 1;
ulRegionEndAddress &= portMPU_RLAR_ADDRESS_MASK;
/* Start address. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = ( ulRegionStartAddress ) |
( portMPU_REGION_NON_SHAREABLE );
/* RO/RW. */
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_READ_ONLY ) != 0 )
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_ONLY );
}
else
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_READ_WRITE );
}
/* XN. */
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_EXECUTE_NEVER ) != 0 )
{
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR |= ( portMPU_REGION_EXECUTE_NEVER );
}
/* End Address. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = ( ulRegionEndAddress ) |
( portMPU_RLAR_REGION_ENABLE );
/* Normal memory/ Device memory. */
if( ( xRegions[ lIndex ].ulParameters & tskMPU_REGION_DEVICE_MEMORY ) != 0 )
{
/* Attr1 in MAIR0 is configured as device memory. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX1;
}
else
{
/* Attr1 in MAIR0 is configured as normal memory. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR |= portMPU_RLAR_ATTR_INDEX0;
}
}
else
{
/* Invalidate the region. */
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRBAR = 0UL;
xMPUSettings->xRegionsSettings[ ulRegionNumber ].ulRLAR = 0UL;
}
lIndex++;
}
}
#endif /* configENABLE_MPU */
/*-----------------------------------------------------------*/
BaseType_t xPortIsInsideInterrupt( void )
{
uint32_t ulCurrentInterrupt;
BaseType_t xReturn;
/* Obtain the number of the currently executing interrupt. Interrupt Program
* Status Register (IPSR) holds the exception number of the currently-executing
* exception or zero for Thread mode.*/
__asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" );
if( ulCurrentInterrupt == 0 )
{
xReturn = pdFALSE;
}
else
{
xReturn = pdTRUE;
}
return xReturn;
}
/*-----------------------------------------------------------*/