Demo/WizNET_DEMO_TERN_186/main.c

/*
	FreeRTOS.org V4.6.1 - Copyright (C) 2003-2007 Richard Barry.

	This file is part of the FreeRTOS.org distribution.

	FreeRTOS.org is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2 of the License, or
	(at your option) any later version.

	FreeRTOS.org is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with FreeRTOS.org; if not, write to the Free Software
	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

	A special exception to the GPL can be applied should you wish to distribute
	a combined work that includes FreeRTOS.org, without being obliged to provide
	the source code for any proprietary components.  See the licensing section
	of http://www.FreeRTOS.org for full details of how and when the exception
	can be applied.

	***************************************************************************
	See http://www.FreeRTOS.org for documentation, latest information, license 
	and contact details.  Please ensure to read the configuration and relevant 
	port sections of the online documentation.

	Also see http://www.SafeRTOS.com a version that has been certified for use
	in safety critical systems, plus commercial licensing, development and
	support options.
	***************************************************************************
*/

/*
 * Creates all the demo application tasks then starts the scheduler.  In 
 * addition to the standard demo application tasks main() creates the 
 * HTTPServer task, and a "Check" task.  The Check task periodically inspects
 * all the other tasks in the system to see if any errors have been reported.
 * The error status is then displayed on the served WEB page.
 */

/* Tern includes. */
#include <ae.h>
#include <embedded.h>

/* FreeRTOS.org includes. */
#include <FreeRTOS.h>
#include <task.h>

/* Demo application includes. */
#include "HTTPTask.h"
#include "integer.h"
#include "PollQ.h"
#include "semtest.h"
#include "dynamic.h"
#include "BlockQ.h"
#include "Death.h"
#include "serial.h"
#include "comtest.h"

/* How often should the "check" task execute? */
#define mainCHECK_DELAY		( 3000 / portTICK_RATE_MS )

/* Priorities allocated to the various tasks. */
#define mainQUEUE_POLL_PRIORITY		( tskIDLE_PRIORITY + 2 )
#define mainCHECK_TASK_PRIORITY		( tskIDLE_PRIORITY + 4 )
#define mainSEM_TEST_PRIORITY		( tskIDLE_PRIORITY + 1 )
#define mainBLOCK_Q_PRIORITY		( tskIDLE_PRIORITY + 2 )
#define mainHTTP_TASK_PRIORITY		( tskIDLE_PRIORITY + 3 )
#define mainSUICIDE_TASKS_PRIORITY  ( tskIDLE_PRIORITY + 1 )
#define mainCOM_TEST_PRIORITY		( tskIDLE_PRIORITY + 2 )

/* Used to indicate the error status.  A value of 0 means that an error has not
been detected in any task.  A non zero value indicates which group of demo 
tasks has reported an error.  See prvCheckTask() for bit definitions. */
unsigned portSHORT usCheckStatus = 0;

/*-----------------------------------------------------------*/

/*
 * Setup any hardware required by the demo - other than the RTOS tick which
 * is configured when the scheduler is started.
 */
static void prvSetupHardware( void );

/*
 * Periodically inspect all the other tasks, updating usCheckStatus should an
 * error be discovered in any task.
 */
static void prvCheckTask( void *pvParameters );
/*-----------------------------------------------------------*/

void main(void)
{
	prvSetupHardware();

    /* Start the HTTP server task. */
	xTaskCreate( vHTTPTask, "WizNet", configMINIMAL_STACK_SIZE, NULL, mainHTTP_TASK_PRIORITY, NULL );

	/* Start the demo/test application tasks.  See the demo application 
	section of the FreeRTOS.org WEB site for more information. */
	vStartIntegerMathTasks( tskIDLE_PRIORITY );
	vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
  	vStartDynamicPriorityTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
    vStartComTestTasks( mainCOM_TEST_PRIORITY, serCOM2, ser57600 );

	/* Start the task that checks the other demo tasks for errors. */
    xTaskCreate( prvCheckTask, "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );

	/* The suicide tasks must be created last as they monitor the number of
	tasks in the system to ensure there are no more or fewer than expected
	compared to the number that were executing when the task started. */
   	vCreateSuicidalTasks( mainSUICIDE_TASKS_PRIORITY );
        
	/* Finally start the scheduler. */
    vTaskStartScheduler();

	/* Should not get here! */
	for( ;; );
}
/*-----------------------------------------------------------*/

static void prvSetupHardware( void )
{
	ae_init();
}
/*-----------------------------------------------------------*/

static void prvCheckTask( void *pvParameters )
{
	( void ) pvParameters;

	/* Check all the demo tasks to ensure that they are all still running, and
    that none of them have detected	an error. */
    for( ;; )
    {
		/* Block until it is time to check again. */
    	vTaskDelay( mainCHECK_DELAY );
        
		if( xAreIntegerMathsTaskStillRunning() != pdTRUE )
		{
			usCheckStatus |= 0x01;
		}

		if( xArePollingQueuesStillRunning() != pdTRUE )
		{
			usCheckStatus |= 0x02;
		}

		if( xAreSemaphoreTasksStillRunning() != pdTRUE )
		{
			usCheckStatus |= 0x04;
		}

		if( xAreDynamicPriorityTasksStillRunning() != pdTRUE )
		{
			usCheckStatus |= 0x08;
		}

		if( xAreBlockingQueuesStillRunning() != pdTRUE )
		{
			usCheckStatus |= 0x10;
		}

        if( xIsCreateTaskStillRunning() != pdTRUE )
        {
        	usCheckStatus |= 0x20;
        }

        if( xAreComTestTasksStillRunning() != pdTRUE )
        {
        	usCheckStatus |= 0x40;
        }
	}
}
/*-----------------------------------------------------------*/

/* This is included to prevent link errors - allowing the 'full' version of
the comtest tasks to be used.  It can be ignored. */
void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend )
{
	( void ) ppcMessageToSend;
}