Update download locations to outside repository content (#1280)
Update curl command to download in a non user accessible folder
diff --git a/.github/workflows/coverity_scan.yml b/.github/workflows/coverity_scan.yml
index 803a29b..0afc8e2 100644
--- a/.github/workflows/coverity_scan.yml
+++ b/.github/workflows/coverity_scan.yml
@@ -42,11 +42,22 @@
# ${{ env.stepName }}
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"
- wget -nv -qO- https://scan.coverity.com/download/linux64 --post-data "token=${COVERITY_TOKEN}&project=FreeRTOS-Kernel" | tar -zx --one-top-level=cov_scan --strip-components 1
- echo "cov_scan_path=$(pwd)/cov_scan/bin" >> $GITHUB_ENV
+ wget -nv -q -O "$HOME/cov-analysis.tar.gz" https://scan.coverity.com/download/linux64 --post-data="token=${COVERITY_TOKEN}&project=FreeRTOS-Kernel"
+
+ EXPECTED_MD5="e4418004b073140d67390cffba79c3b2"
+ GENERATED_MD5=$(md5sum "$HOME/cov-analysis.tar.gz" | awk '{print $1}')
- echo "::endgroup::"
- echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }} "
+ if [ "$GENERATED_MD5" = "$EXPECTED_MD5" ]; then
+ tar -zxf "$HOME/cov-analysis.tar.gz" --one-top-level=cov_scan -C "$HOME"
+ echo "cov_scan_path=$HOME/cov_scan/bin" >> $GITHUB_ENV
+ sudo rm -f "$HOME/cov-analysis.tar.gz"
+ echo "::endgroup::"
+ echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }} "
+ else
+ echo -e "${{ env.bashFail }} MD5 checksum verification failed for cov-analysis.tar.gz ${{ env.bashEnd }}"
+ echo -e "${{ env.bashFail }} ${{ env.stepName }} ${{ env.bashEnd }}"
+ exit -1
+ fi
- env:
stepName: Coverity Build
diff --git a/.github/workflows/kernel-demos.yml b/.github/workflows/kernel-demos.yml
index 404c602..9371e9c 100644
--- a/.github/workflows/kernel-demos.yml
+++ b/.github/workflows/kernel-demos.yml
@@ -156,14 +156,27 @@
run: |
# ${{ env.stepName }}
echo -e "::group::${{ env.bashInfo }} ${{ env.stepName }} ${{ env.bashEnd }}"
- curl -L -O https://dr-download.ti.com/software-development/ide-configuration-compiler-or-debugger/MD-LlCjWuAbzH/9.3.1.2/msp430-gcc-full-linux-x64-installer-9.3.1.2.7z
sudo apt update -y
sudo apt install -y p7zip-full
- 7z x ./msp430-gcc-full-linux-x64-installer-9.3.1.2.7z
- chmod +x ./msp430-gcc-full-linux-x64-installer-9.3.1.2.run
- sudo ./msp430-gcc-full-linux-x64-installer-9.3.1.2.run --prefix /usr/bin/msp430-gcc --mode unattended
- echo "::endgroup::"
- echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"
+ pushd $HOME
+ curl -L -o msp430-gcc-full-linux-x64-installer-9.3.1.2.7z https://dr-download.ti.com/software-development/ide-configuration-compiler-or-debugger/MD-LlCjWuAbzH/9.3.1.2/msp430-gcc-full-linux-x64-installer-9.3.1.2.7z
+
+ EXPECTED_MD5="2db2f99b4cd5c541ca0389ee20c67527"
+ GENERATED_MD5=$(md5sum msp430-gcc-full-linux-x64-installer-9.3.1.2.7z | awk '{print $1}')
+
+ if [ "$GENERATED_MD5" = "$EXPECTED_MD5" ]; then
+ 7z x ./msp430-gcc-full-linux-x64-installer-9.3.1.2.7z
+ chmod +x ./msp430-gcc-full-linux-x64-installer-9.3.1.2.run
+ sudo ./msp430-gcc-full-linux-x64-installer-9.3.1.2.run --prefix /usr/bin/msp430-gcc --mode unattended
+ echo "::endgroup::"
+ popd
+ echo -e "${{ env.bashPass }} ${{ env.stepName }} ${{ env.bashEnd }}"
+ else
+ popd
+ echo -e "${{ env.bashFail }} MD5 checksum verification failed for msp430-gcc-full-linux-x64-installer-9.3.1.2.7z ${{ env.bashEnd }}"
+ echo -e "${{ env.bashFail }} ${{ env.stepName }} ${{ env.bashEnd }}"
+ exit -1
+ fi
- name: Build msp430_GCC Demo
shell: bash
@@ -211,21 +224,23 @@
sudo apt install -y autogen gawk libgmp-dev libmpc-dev libmpfr-dev
sudo apt install -y patchutils sharutils zlib1g-dev autoconf2.64
+ pushd $HOME
# Download the mb-gcc toolchain from github
- curl -L -O https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/binutils-microblaze_2.35-2021-0623+1_amd64.deb;
- curl -L -O https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/gcc-microblaze_10.2.0-2021-0623+2_amd64.deb;
- curl -L -O https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/libnewlib-microblaze-dev_3.3.0-2021-0623+3_all.deb;
- curl -L -O https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/libnewlib-microblaze-doc_3.3.0-2021-0623+3_all.deb;
- curl -L -O https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/libnewlib-microblaze_3.3.0-2021-0623+3_all.deb;
- curl -L -O https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/newlib-source_3.3.0-2021-0623+3_all.deb;
+ curl -L -o binutils-microblaze.deb https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/binutils-microblaze_2.35-2021-0623+1_amd64.deb;
+ curl -L -o gcc-microblaze.deb https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/gcc-microblaze_10.2.0-2021-0623+2_amd64.deb;
+ curl -L -o libnewlib-microblaze-dev.deb https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/libnewlib-microblaze-dev_3.3.0-2021-0623+3_all.deb;
+ curl -L -o libnewlib-microblaze-doc.deb https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/libnewlib-microblaze-doc_3.3.0-2021-0623+3_all.deb;
+ curl -L -o libnewlib-microblaze.deb https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/libnewlib-microblaze_3.3.0-2021-0623+3_all.deb;
+ curl -L -o newlib-source.deb https://github.com/mdednev/mb-gcc/releases/download/2021-0623%2B2/newlib-source_3.3.0-2021-0623+3_all.deb;
+ popd
# Install the packages for the toolchain
- sudo apt install -y ./binutils-microblaze*.deb;
- sudo apt install -y ./gcc-microblaze*.deb;
- sudo apt install -y ./libnewlib-microblaze-dev*.deb;
- sudo apt install -y ./libnewlib-microblaze-doc*.deb;
- sudo apt install -y ./libnewlib-microblaze*.deb;
- sudo apt install -y ./newlib-source*.deb;
+ sudo apt install -y $HOME/binutils-microblaze.deb;
+ sudo apt install -y $HOME/gcc-microblaze.deb;
+ sudo apt install -y $HOME/libnewlib-microblaze-dev.deb;
+ sudo apt install -y $HOME/libnewlib-microblaze-doc.deb;
+ sudo apt install -y $HOME/libnewlib-microblaze.deb;
+ sudo apt install -y $HOME/newlib-source.deb;
# Validate that the toolchain is in the path and can be called
which mb-gcc
diff --git a/portable/ThirdParty/GCC/ARM_TFM/README.md b/portable/ThirdParty/GCC/ARM_TFM/README.md
index 7df149f..bc594b1 100644
--- a/portable/ThirdParty/GCC/ARM_TFM/README.md
+++ b/portable/ThirdParty/GCC/ARM_TFM/README.md
@@ -52,13 +52,13 @@
The setting of this macro is decided by the setting in Secure Side which is platform-specific.
If the Secure Side enables Non-Secure access to FPU, then this macro can be configured as 0 or 1. Otherwise, this macro can only be configured as 0.
Please note that Cortex-M23 does not support FPU.
-Please refer to [TF-M documentation](https://tf-m-user-guide.trustedfirmware.org/integration_guide/tfm_fpu_support.html) for FPU usage on the Non-Secure side.
+Please refer to [TF-M documentation](https://trustedfirmware-m.readthedocs.io/en/latest/integration_guide/tfm_fpu_support.html) for FPU usage on the Non-Secure side.
* `configENABLE_MVE`
The setting of this macro is decided by the setting in Secure Side which is platform-specific.
If the Secure Side enables Non-Secure access to MVE, then this macro can be configured as 0 or 1. Otherwise, this macro can only be configured as 0.
Please note that only Cortex-M55 and Cortex-M85 support MVE.
-Please refer to [TF-M documentation](https://tf-m-user-guide.trustedfirmware.org/integration_guide/tfm_fpu_support.html) for MVE usage on the Non-Secure side.
+Please refer to [TF-M documentation](https://trustedfirmware-m.readthedocs.io/en/latest/integration_guide/tfm_fpu_support.html) for MVE usage on the Non-Secure side.
* `configENABLE_TRUSTZONE`
This macro should be configured as 0 because TF-M doesn't use the secure context management function of FreeRTOS. New secure context management might be introduced when TF-M supports multiple secure context.
