| #daemon configuration | |
| telnet_port 4444 | |
| gdb_port 3333 | |
| #interface | |
| interface parport | |
| parport_port 0x378 | |
| parport_cable wiggler | |
| jtag_speed 2 | |
| #use combined on interfaces or targets that can't set TRST/SRST separately | |
| reset_config trst_and_srst srst_pulls_trst | |
| #jtag scan chain | |
| #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) | |
| jtag_device 4 0x1 0xf 0xe | |
| #target configuration | |
| daemon_startup reset | |
| #target <type> <startup mode> | |
| #target arm7tdmi <reset mode> <chainpos> <endianness> <variant> | |
| target arm7tdmi little run_and_init 0 arm7tdmi-s_r4 | |
| run_and_halt_time 0 30 | |
| working_area 0 0x40000000 0x40000 nobackup | |
| #flash configuration | |
| flash bank lpc2000 0x0 0x80000 0 0 0 lpc2000_v2 12000 calc_checksum | |
| flash bank cfi 0x80000000 0x400000 2 2 0 | |
| # For more information about the configuration files, take a look at: | |
| # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger | |
| target_script 0 reset program.script |