| # Hey Emacs, this is a -*- makefile -*- |
| |
| # The purpose of this file is to define the build configuration variables used |
| # by the generic Makefile. See Makefile header for further information. |
| |
| # Copyright (c) 2007, Atmel Corporation All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # |
| # 1. Redistributions of source code must retain the above copyright notice, this |
| # list of conditions and the following disclaimer. |
| # |
| # 2. Redistributions in binary form must reproduce the above copyright notice, |
| # this list of conditions and the following disclaimer in the documentation and/ |
| # or other materials provided with the distribution. |
| # |
| # 3. The name of ATMEL may not be used to endorse or promote products derived |
| # from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND |
| # SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, |
| # INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY |
| # OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, |
| # EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| |
| |
| # Base paths |
| PRJ_PATH = ../.. |
| APPS_PATH = $(PRJ_PATH)/APPLICATIONS |
| BRDS_PATH = $(PRJ_PATH)/BOARDS |
| COMP_PATH = $(PRJ_PATH)/COMPONENTS |
| DRVR_PATH = $(PRJ_PATH)/DRIVERS |
| SERV_PATH = $(PRJ_PATH)/SERVICES |
| UTIL_PATH = $(PRJ_PATH)/UTILS |
| |
| # Demo paths |
| FREERTOS_PATH = ../../../.. |
| FREERTOS_PORT_PATH = $(FREERTOS_PATH)/Source/portable/GCC/AVR32_UC3 |
| FREERTOS_MEM_PATH = $(FREERTOS_PATH)/Source/portable/MemMang |
| DEMO_PATH = ../.. |
| ETH_PATH = $(DEMO_PATH)/NETWORK |
| WEB_PATH = $(ETH_PATH)/BasicWEB |
| TFTP_PATH = $(ETH_PATH)/BasicTFTP |
| SMTP_PATH = $(ETH_PATH)/BasicSMTP |
| LWIP_PATH = $(FREERTOS_PATH)/Demo/Common/ethernet/lwIP |
| LWIP_PORT_PATH = $(ETH_PATH)/lwip-port/AT32UC3A |
| |
| # CPU architecture: {ap|uc} |
| ARCH = uc |
| |
| # Part: {none|ap7xxx|uc3xxxxx} |
| PART = uc3a0512 |
| |
| # Flash memories: [{cfi|internal}@address,size]... |
| FLASH = internal@0x80000000,512Kb |
| |
| # Clock source to use when programming: [{xtal|extclk|int}] |
| PROG_CLOCK = xtal |
| |
| # Device/Platform/Board include path |
| PLATFORM_INC_PATH = \ |
| $(BRDS_PATH)/ |
| |
| # Target name: {*.a|*.elf} |
| TARGET = $(PART)-lwipdemo.elf |
| |
| # Definitions: [-D name[=definition]...] [-U name...] |
| # Things that might be added to DEFS: |
| # BOARD Board used: {EVKxxxx} |
| # EXT_BOARD Extension board used (if any): {EXTxxxx} |
| DEFS = -D BOARD=EVK1100 -D FREERTOS_USED -D HTTP_USED=1 -D TFTP_USED=1 -D SMTP_USED=0 |
| |
| # Include path |
| INC_PATH = \ |
| $(UTIL_PATH)/ \ |
| $(UTIL_PATH)/PREPROCESSOR/ \ |
| $(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/ \ |
| $(DRVR_PATH)/INTC/ \ |
| $(DRVR_PATH)/TC/ \ |
| $(DRVR_PATH)/PM/ \ |
| $(DRVR_PATH)/GPIO/ \ |
| $(DRVR_PATH)/FLASHC/ \ |
| $(DRVR_PATH)/MACB/ \ |
| $(DEMO_PATH)/ \ |
| $(FREERTOS_PATH)/Source/include/ \ |
| $(FREERTOS_PATH)/Demo/Common/include/ \ |
| $(FREERTOS_PORT_PATH)/ \ |
| $(FREERTOS_MEM_PATH)/ \ |
| $(ETH_PATH)/ \ |
| $(LWIP_PATH)/include/ \ |
| $(LWIP_PATH)/include/ipv4/ \ |
| $(LWIP_PORT_PATH)/ \ |
| $(WEB_PATH)/ \ |
| $(TFTP_PATH)/ \ |
| $(SMTP_PATH)/ |
| |
| # C source files |
| |
| LWIP_SRC = \ |
| $(LWIP_PATH)/core/inet.c \ |
| $(LWIP_PATH)/core/mem.c \ |
| $(LWIP_PATH)/core/memp.c \ |
| $(LWIP_PATH)/core/netif.c \ |
| $(LWIP_PATH)/core/pbuf.c \ |
| $(LWIP_PATH)/core/raw.c \ |
| $(LWIP_PATH)/core/stats.c \ |
| $(LWIP_PATH)/core/sys.c \ |
| $(LWIP_PATH)/core/tcp.c \ |
| $(LWIP_PATH)/core/tcp_in.c \ |
| $(LWIP_PATH)/core/tcp_out.c \ |
| $(LWIP_PATH)/core/ipv4/ip.c \ |
| $(LWIP_PATH)/core/ipv4/ip_addr.c \ |
| $(LWIP_PATH)/core/ipv4/icmp.c \ |
| $(LWIP_PATH)/api/sockets.c \ |
| $(LWIP_PATH)/api/tcpip.c \ |
| $(LWIP_PATH)/api/api_msg.c \ |
| $(LWIP_PATH)/api/err.c \ |
| $(LWIP_PATH)/api/api_lib.c \ |
| $(LWIP_PATH)/netif/etharp.c \ |
| $(LWIP_PATH)/core/udp.c \ |
| $(LWIP_PATH)/core/ipv4/ip_frag.c |
| |
| CSRCS = \ |
| $(BRDS_PATH)/EVK1100/led.c \ |
| $(DRVR_PATH)/INTC/intc.c \ |
| $(DRVR_PATH)/TC/tc.c \ |
| $(DRVR_PATH)/PM/pm.c \ |
| $(DRVR_PATH)/MACB/macb.c \ |
| $(DRVR_PATH)/GPIO/gpio.c \ |
| $(DRVR_PATH)/FLASHC/flashc.c \ |
| $(DEMO_PATH)/main.c \ |
| $(DEMO_PATH)/PARTEST/ParTest.c \ |
| $(DEMO_PATH)/SERIAL/serial.c \ |
| $(FREERTOS_PATH)/Source/tasks.c \ |
| $(FREERTOS_PATH)/Source/queue.c \ |
| $(FREERTOS_PATH)/Source/list.c \ |
| $(FREERTOS_PATH)/Source/croutine.c \ |
| $(FREERTOS_PATH)/Demo/Common/Minimal/flash.c \ |
| $(FREERTOS_PORT_PATH)/port.c \ |
| $(FREERTOS_MEM_PATH)/heap_3.c \ |
| $(LWIP_SRC) \ |
| $(LWIP_PORT_PATH)/sys_arch.c \ |
| $(LWIP_PORT_PATH)/ethernetif.c \ |
| $(WEB_PATH)/BasicWEB.c \ |
| $(TFTP_PATH)/BasicTFTP.c \ |
| $(SMTP_PATH)/BasicSMTP.c \ |
| $(ETH_PATH)/ethernet.c \ |
| $(DEMO_PATH)/printf-stdarg.c |
| |
| # Assembler source files |
| ASSRCS = \ |
| $(SERV_PATH)/USB/CLASS/DFU/EXAMPLES/ISP/BOOT/trampoline.S \ |
| $(FREERTOS_PORT_PATH)/exception.S |
| |
| # Library path |
| LIB_PATH = |
| |
| # Libraries to link with the project |
| LIBS = |
| |
| # Linker script file if any |
| LINKER_SCRIPT = $(UTIL_PATH)/LINKER_SCRIPTS/AT32UC3A/0512/GCC/link_uc3a0512.lds |
| |
| # Options to request or suppress warnings: [-fsyntax-only] [-pedantic[-errors]] [-w] [-Wwarning...] |
| # For further details, refer to the chapter "GCC Command Options" of the GCC manual. |
| WARNINGS = -Wall |
| |
| # Options for debugging: [-g]... |
| # For further details, refer to the chapter "GCC Command Options" of the GCC manual. |
| DEBUG = -g |
| |
| # Options that control optimization: [-O[0|1|2|3|s]]... |
| # For further details, refer to the chapter "GCC Command Options" of the GCC manual. |
| OPTIMIZATION = -O0 -ffunction-sections -fdata-sections |
| |
| # Extra flags to use when preprocessing |
| CPP_EXTRA_FLAGS = |
| |
| # Extra flags to use when compiling |
| C_EXTRA_FLAGS = |
| |
| # Extra flags to use when assembling |
| AS_EXTRA_FLAGS = |
| |
| # Extra flags to use when linking |
| LD_EXTRA_FLAGS = -Wl,--gc-sections -Wl,-e,_trampoline |
| |
| # Documentation path |
| DOC_PATH = ./DOC/ |
| |
| # Documentation configuration file |
| DOC_CFG = ./doxyfile.doxygen |