Demo/WizNET_DEMO_GCC_ARM7/i2c.h

/*
    FreeRTOS V6.1.1 - Copyright (C) 2011 Real Time Engineers Ltd.

    ***************************************************************************
    *                                                                         *
    * If you are:                                                             *
    *                                                                         *
    *    + New to FreeRTOS,                                                   *
    *    + Wanting to learn FreeRTOS or multitasking in general quickly       *
    *    + Looking for basic training,                                        *
    *    + Wanting to improve your FreeRTOS skills and productivity           *
    *                                                                         *
    * then take a look at the FreeRTOS books - available as PDF or paperback  *
    *                                                                         *
    *        "Using the FreeRTOS Real Time Kernel - a Practical Guide"        *
    *                  http://www.FreeRTOS.org/Documentation                  *
    *                                                                         *
    * A pdf reference manual is also available.  Both are usually delivered   *
    * to your inbox within 20 minutes to two hours when purchased between 8am *
    * and 8pm GMT (although please allow up to 24 hours in case of            *
    * exceptional circumstances).  Thank you for your support!                *
    *                                                                         *
    ***************************************************************************

    This file is part of the FreeRTOS distribution.

    FreeRTOS is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License (version 2) as published by the
    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
    ***NOTE*** The exception to the GPL is included to allow you to distribute
    a combined work that includes FreeRTOS without being obliged to provide the
    source code for proprietary components outside of the FreeRTOS kernel.
    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
    more details. You should have received a copy of the GNU General Public 
    License and the FreeRTOS license exception along with FreeRTOS; if not it 
    can be viewed here: http://www.freertos.org/a00114.html and also obtained 
    by writing to Richard Barry, contact details for whom are available on the
    FreeRTOS WEB site.

    1 tab == 4 spaces!

    http://www.FreeRTOS.org - Documentation, latest information, license and
    contact details.

    http://www.SafeRTOS.com - A version that is certified for use in safety
    critical systems.

    http://www.OpenRTOS.com - Commercial support, development, porting,
    licensing and training services.
*/

#ifndef I2C_H
#define I2C_H

/* Structure used to capture the I2C message details.  The structure is then
 * queued for processing by the I2C ISR. 
 */
typedef struct AN_I2C_MESSAGE
{
	long lMessageLength;					/*< How many bytes of data to send or received - excluding the buffer address. */
	unsigned char ucSlaveAddress;			/*< The slave address of the WIZnet on the I2C bus. */
	unsigned char ucBufferAddressLowByte;	/*< The address within the WIZnet device to which data should be read from / written to. */
	unsigned char ucBufferAddressHighByte;	/*< As above, high byte. */
	xSemaphoreHandle xMessageCompleteSemaphore;	/*< Contains a reference to a semaphore if the application tasks wants notifying when the message has been transacted. */
	unsigned char *pucBuffer;				/*< Pointer to the buffer from where data will be read for transmission, or into which received data will be placed. */
} xI2CMessage;

/* Constants to use as the ulDirection parameter of i2cMessage(). */
#define i2cWRITE				( ( unsigned long ) 0 )
#define i2cREAD					( ( unsigned long ) 1 )

/**
 * Must be called once before any calls to i2cMessage.
 */
void i2cInit( void );

/**
 * Send or receive a message over the I2C bus.
 *
 * @param pucMessage	 The data to be transmitted or the buffer into which
 *						 received data will be placed. 
 *
 * @param lMessageLength The number of bytes to either transmit or receive.
 *
 * @param ucSlaveAddress The slave address of the WIZNet device on the I2C bus.
 *
 * @param usBufferAddress The address within the WIZNet device to which data is
 *						 either written to or read from.  The WIZnet has it's
 *						 own Rx and Tx buffers.
 *
 * @param ulDirection	 Must be either i2cWRITE or i2cREAD as #defined above.
 *
 * @param xMessageCompleteSemaphore
 *						 Can be used to pass a semaphore reference if the 
 *						 calling task want notification of when the message has
 *						 completed.  Otherwise NULL can be passed.
 * 
 * @param xBlockTime	 The time to wait for a space in the message queue to 
 *						 become available should one not be available 
 *						 immediately.
 */
void i2cMessage( const unsigned char * const pucMessage, long lMessageLength, unsigned char ucSlaveAddress, unsigned short usBufferAddress, unsigned long ulDirection, xSemaphoreHandle xMessageCompleteSemaphore, portTickType xBlockTime );

#endif