| /****************************************************************************** |
| * |
| * Copyright (C) 2010 - 2014 Xilinx, Inc. All rights reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * Use of the Software is limited solely to applications: |
| * (a) running on a Xilinx device, or |
| * (b) that interact with a Xilinx device through a bus or interconnect. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * XILINX BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF |
| * OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
| * SOFTWARE. |
| * |
| * Except as contained in this notice, the name of the Xilinx shall not be used |
| * in advertising or otherwise to promote the sale, use or other dealings in |
| * this Software without prior written authorization from Xilinx. |
| * |
| ******************************************************************************/ |
| /*****************************************************************************/ |
| /** |
| * |
| * @file xgpiops.h |
| * |
| * The Xilinx PS GPIO driver. This driver supports the Xilinx PS GPIO |
| * Controller. |
| * |
| * The GPIO Controller supports the following features: |
| * - 4 banks |
| * - Masked writes (There are no masked reads) |
| * - Bypass mode |
| * - Configurable Interrupts (Level/Edge) |
| * |
| * This driver is intended to be RTOS and processor independent. Any needs for |
| * dynamic memory management, threads or thread mutual exclusion, virtual |
| * memory, or cache control must be satisfied by the layer above this driver. |
| |
| * This driver supports all the features listed above, if applicable. |
| * |
| * <b>Driver Description</b> |
| * |
| * The device driver enables higher layer software (e.g., an application) to |
| * communicate to the GPIO. |
| * |
| * <b>Interrupts</b> |
| * |
| * The driver provides interrupt management functions and an interrupt handler. |
| * Users of this driver need to provide callback functions. An interrupt handler |
| * example is available with the driver. |
| * |
| * <b>Threads</b> |
| * |
| * This driver is not thread safe. Any needs for threads or thread mutual |
| * exclusion must be satisfied by the layer above this driver. |
| * |
| * <b>Asserts</b> |
| * |
| * Asserts are used within all Xilinx drivers to enforce constraints on argument |
| * values. Asserts can be turned off on a system-wide basis by defining, at |
| * compile time, the NDEBUG identifier. By default, asserts are turned on and it |
| * is recommended that users leave asserts on during development. |
| * |
| * <b>Building the driver</b> |
| * |
| * The XGpioPs driver is composed of several source files. This allows the user |
| * to build and link only those parts of the driver that are necessary. |
| * <br><br> |
| * |
| * <pre> |
| * MODIFICATION HISTORY: |
| * |
| * Ver Who Date Changes |
| * ----- ---- -------- ----------------------------------------------- |
| * 1.00a sv 01/15/10 First Release |
| * 1.01a sv 04/15/12 Removed the APIs XGpioPs_SetMode, XGpioPs_SetModePin |
| * XGpioPs_GetMode, XGpioPs_GetModePin as they are not |
| * relevant to Zynq device.The interrupts are disabled |
| * for output pins on all banks during initialization. |
| * 1.02a hk 08/22/13 Added low level reset API |
| * 2.1 hk 04/29/14 Use Input data register DATA_RO for read. CR# 771667. |
| * |
| * </pre> |
| * |
| ******************************************************************************/ |
| #ifndef XGPIOPS_H /* prevent circular inclusions */ |
| #define XGPIOPS_H /* by using protection macros */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /***************************** Include Files *********************************/ |
| |
| #include "xstatus.h" |
| #include "xgpiops_hw.h" |
| |
| /************************** Constant Definitions *****************************/ |
| |
| /** @name Interrupt types |
| * @{ |
| * The following constants define the interrupt types that can be set for each |
| * GPIO pin. |
| */ |
| #define XGPIOPS_IRQ_TYPE_EDGE_RISING 0 /**< Interrupt on Rising edge */ |
| #define XGPIOPS_IRQ_TYPE_EDGE_FALLING 1 /**< Interrupt Falling edge */ |
| #define XGPIOPS_IRQ_TYPE_EDGE_BOTH 2 /**< Interrupt on both edges */ |
| #define XGPIOPS_IRQ_TYPE_LEVEL_HIGH 3 /**< Interrupt on high level */ |
| #define XGPIOPS_IRQ_TYPE_LEVEL_LOW 4 /**< Interrupt on low level */ |
| /*@}*/ |
| |
| #define XGPIOPS_BANK0 0 /**< GPIO Bank 0 */ |
| #define XGPIOPS_BANK1 1 /**< GPIO Bank 1 */ |
| #define XGPIOPS_BANK2 2 /**< GPIO Bank 2 */ |
| #define XGPIOPS_BANK3 3 /**< GPIO Bank 3 */ |
| |
| #define XGPIOPS_MAX_BANKS 4 /**< Max banks in a GPIO device */ |
| #define XGPIOPS_BANK_MAX_PINS 32 /**< Max pins in a GPIO bank */ |
| |
| #define XGPIOPS_DEVICE_MAX_PIN_NUM 118 /*< Max pins in the GPIO device |
| * 0 - 31, Bank 0 |
| * 32 - 53, Bank 1 |
| * 54 - 85, Bank 2 |
| * 86 - 117, Bank 3 |
| */ |
| |
| /**************************** Type Definitions *******************************/ |
| |
| /****************************************************************************/ |
| /** |
| * This handler data type allows the user to define a callback function to |
| * handle the interrupts for the GPIO device. The application using this |
| * driver is expected to define a handler of this type, to support interrupt |
| * driven mode. The handler executes in an interrupt context such that minimal |
| * processing should be performed. |
| * |
| * @param CallBackRef is a callback reference passed in by the upper layer |
| * when setting the callback functions for a GPIO bank. It is |
| * passed back to the upper layer when the callback is invoked. Its |
| * type is not important to the driver component, so it is a void |
| * pointer. |
| * @param Bank is the bank for which the interrupt status has changed. |
| * @param Status is the Interrupt status of the GPIO bank. |
| * |
| *****************************************************************************/ |
| typedef void (*XGpioPs_Handler) (void *CallBackRef, int Bank, u32 Status); |
| |
| /** |
| * This typedef contains configuration information for a device. |
| */ |
| typedef struct { |
| u16 DeviceId; /**< Unique ID of device */ |
| u32 BaseAddr; /**< Register base address */ |
| } XGpioPs_Config; |
| |
| /** |
| * The XGpioPs driver instance data. The user is required to allocate a |
| * variable of this type for the GPIO device in the system. A pointer |
| * to a variable of this type is then passed to the driver API functions. |
| */ |
| typedef struct { |
| XGpioPs_Config GpioConfig; /**< Device configuration */ |
| u32 IsReady; /**< Device is initialized and ready */ |
| XGpioPs_Handler Handler; /**< Status handlers for all banks */ |
| void *CallBackRef; /**< Callback ref for bank handlers */ |
| } XGpioPs; |
| |
| /***************** Macros (Inline Functions) Definitions *********************/ |
| |
| /************************** Function Prototypes ******************************/ |
| |
| /* |
| * Functions in xgpiops.c |
| */ |
| int XGpioPs_CfgInitialize(XGpioPs *InstancePtr, XGpioPs_Config *ConfigPtr, |
| u32 EffectiveAddr); |
| |
| /* |
| * Bank APIs in xgpiops.c |
| */ |
| u32 XGpioPs_Read(XGpioPs *InstancePtr, u8 Bank); |
| void XGpioPs_Write(XGpioPs *InstancePtr, u8 Bank, u32 Data); |
| void XGpioPs_SetDirection(XGpioPs *InstancePtr, u8 Bank, u32 Direction); |
| u32 XGpioPs_GetDirection(XGpioPs *InstancePtr, u8 Bank); |
| void XGpioPs_SetOutputEnable(XGpioPs *InstancePtr, u8 Bank, u32 Enable); |
| u32 XGpioPs_GetOutputEnable(XGpioPs *InstancePtr, u8 Bank); |
| void XGpioPs_GetBankPin(u8 PinNumber, u8 *BankNumber, u8 *PinNumberInBank); |
| |
| /* |
| * Pin APIs in xgpiops.c |
| */ |
| int XGpioPs_ReadPin(XGpioPs *InstancePtr, int Pin); |
| void XGpioPs_WritePin(XGpioPs *InstancePtr, int Pin, int Data); |
| void XGpioPs_SetDirectionPin(XGpioPs *InstancePtr, int Pin, int Direction); |
| int XGpioPs_GetDirectionPin(XGpioPs *InstancePtr, int Pin); |
| void XGpioPs_SetOutputEnablePin(XGpioPs *InstancePtr, int Pin, int Enable); |
| int XGpioPs_GetOutputEnablePin(XGpioPs *InstancePtr, int Pin); |
| |
| /* |
| * Diagnostic functions in xgpiops_selftest.c |
| */ |
| int XGpioPs_SelfTest(XGpioPs *InstancePtr); |
| |
| /* |
| * Functions in xgpiops_intr.c |
| */ |
| /* |
| * Bank APIs in xgpiops_intr.c |
| */ |
| void XGpioPs_IntrEnable(XGpioPs *InstancePtr, u8 Bank, u32 Mask); |
| void XGpioPs_IntrDisable(XGpioPs *InstancePtr, u8 Bank, u32 Mask); |
| u32 XGpioPs_IntrGetEnabled(XGpioPs *InstancePtr, u8 Bank); |
| u32 XGpioPs_IntrGetStatus(XGpioPs *InstancePtr, u8 Bank); |
| void XGpioPs_IntrClear(XGpioPs *InstancePtr, u8 Bank, u32 Mask); |
| void XGpioPs_SetIntrType(XGpioPs *InstancePtr, u8 Bank, u32 IntrType, |
| u32 IntrPolarity, u32 IntrOnAny); |
| void XGpioPs_GetIntrType(XGpioPs *InstancePtr, u8 Bank, u32 *IntrType, |
| u32 *IntrPolarity, u32 *IntrOnAny); |
| void XGpioPs_SetCallbackHandler(XGpioPs *InstancePtr, void *CallBackRef, |
| XGpioPs_Handler FuncPtr); |
| void XGpioPs_IntrHandler(XGpioPs *InstancePtr); |
| |
| /* |
| * Pin APIs in xgpiops_intr.c |
| */ |
| void XGpioPs_SetIntrTypePin(XGpioPs *InstancePtr, int Pin, u8 IrqType); |
| u8 XGpioPs_GetIntrTypePin(XGpioPs *InstancePtr, int Pin); |
| |
| void XGpioPs_IntrEnablePin(XGpioPs *InstancePtr, int Pin); |
| void XGpioPs_IntrDisablePin(XGpioPs *InstancePtr, int Pin); |
| int XGpioPs_IntrGetEnabledPin(XGpioPs *InstancePtr, int Pin); |
| int XGpioPs_IntrGetStatusPin(XGpioPs *InstancePtr, int Pin); |
| void XGpioPs_IntrClearPin(XGpioPs *InstancePtr, int Pin); |
| |
| /* |
| * Functions in xgpiops_sinit.c |
| */ |
| XGpioPs_Config *XGpioPs_LookupConfig(u16 DeviceId); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* end of protection macro */ |